About this Micro Virtual Instructor Led Training (VILT)

The use of MPD introduces additional equipment to the wellbore as well as surface equipment and control systems. This Micro VILT examines failure modes for this equipment and how they can be detected. It also examines what immediate and subsequent steps must be taken to maintain and/or recover primary well control. Fault-finding trees for the Driller and MPD Operator are also examined.

 

Micro VILT Group Pricing:

SGD$1,200 per pax

(5 persons per group session)

For more details on pricing for larger groups or customisation of course outline, call us at +65 6741 9927 or email info@asiaedge.net.

 

Delivery of this Micro VILT:

The Micro VILT will be delivered through Zoom, MS Teams or equivalent video conference platforms in combination with other online interactive training tools.

 

Micro VILT Duration:

The Micro VILT will be delivered online in 1 session comprising 4 hours (GMT+8 Malaysia Time), with breaks.

 

Micro VILT Schedule:

Afternoon session: 1.30pm – 5.00pm

 

Breakdown of Modules:

MPD Process System Review

  1. MPD applications
  2. MPD control systems
  3. MPD failure modes

MPD Failure Mode and Effect Analysis

  1. What could go wrong?
  2. What are the indications?
  3. Interpreting Instrumentation

MPD Contingency Plans

  1. Priorities, Roles and Responsibilities
  2. Immediate Response to maintain or recover primary well control
  3. Secondary Response to remove influx etc

 

Your expert course leader has more than 30 years of experience in the Drilling Industry. He worked offshore as a Roustabout and Roughneck while studying for his B.Eng in Mining Engineering. After graduation, he joined Shell in 1985 and worked as a Drilling Engineer and Drilling Supervisor on-site and in the office in a wide range of onshore, offshore and deepwater environments.

He served as the examiner for Shell’s “Round 2” Competence program and edited the Shell Well Engineering Learning Manual. He is the technical author of several corporate Well Control and Casing Design standards and training manuals.

Since 2000, he has worked as a Well Engineering Consultant. In addition to lecturing and general consultancy in Casing Design and Well Control, he specialises in Deepwater and HPHT Well Control coaching, rig team building and simulation. He pioneered the concept of “Drilling the Well on a Simulator”, working closely with drilling simulator vendors, operators and drilling contractors to produce a realistic and relevant training environment. This enabled integrated rig teams to be exposed to well specific well control and other operational challenges, develop and then practice response strategies.