Upstream Oil & Gas

Webinar: Proton Exchange Membrane (PEM) Electrolyser and Balance of Plant

Technical Report Writing and Presentation Skills In the AI Era - For Engineers, Scientists and Technical Professionals in The Energy Industry

The Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals course focuses on the unique needs of technical professionals who write for both technical and non-technical readers.

Casing And Tubing Design

This 5-day course uses a mix of generic well designs and some specific local wells and local issues to build up competency. The training is therefore part training and part workshop. By attending this course, participants will have worked on well designs in considerable detail and have several completed, fully-functional models based on the Oliasoft software. The focus will be on both casing and tubing issues but if required, it can be on one or the other.

Sand Control Design and Technology

The business of fuelling the world through hydrocarbon production must be carried out with optimum profitability. Participants will learn how sand production and inadvertent formation damage can erode these profits. Methods and procedures will be presented to guide the participants in decision making with regards to completing a well with optimum control of formation sand while incurring minimal damage to the well or production zone. Extensive theory will be presented illustrating why certain...

Sedimentology & Depositional Environments of Deepwater Deposits

This 5-day course covers the theory and application of sedimentology and depositional environments of deepwater deposits. The course comprises an extensive series of topic-related modules, with provision to include workshops on the participants’ datasets. The course can be concluded with a multiple-choice test.

Structural Interpretation of Seismic Data

The 5-day course introduces the nature and evolution of simple and complex structures and how to interpret them. The course also discusses the timing of structures relative to hydrocarbon generation and migration and the consequent risk or COS. The following structures are covered: Introduction, Extension, Inversion, Strike-Slip and Salt. The participants can assess the workflows required for successful structural analysis and apply the necessary after the course. The course uses a mixture of...

Asset Integrity & Life Extension

Asset life extension allows organizations to maximize the utilization of their resources. Instead of discarding assets prematurely, they can continue to extract value from them by leveraging their remaining useful life. This is especially beneficial when assets are still capable of meeting operational requirements and no compelling reasons for replacement exist. By extending the life of existing assets, organizations also help to conserve resources, reduce waste generation, and minimize their...

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS).

Data Analytics Workflows for Artificial Lift, Production and Facility Engineers

In this hands-on 2-day training course, the participants learn some data analysis and data science techniques and workflows applied to petroleum production (specifically artificial lift) while reviewing code and practicing.

Artificial Lift and Real-Time Production Optimization in Digital Oilfield

This 5-day training course offers a thorough treatment of artificial lift techniques including design and operation for production optimization.

CO2 Capture, Processing & Technologies - Virtual Instructor Led Training (VILT)

This course will cover the technology and costs of CCS capture technologies with a focus and will include discussion on the main factors affecting separation, their technology readiness and levelized costs.

Negotiation Skills and Techniques for Engineers and Technical Professionals

This is a 2 full-day course that is aimed at providing professionals in the Oil & Gas business with a comprehensive set of core negotiating skills.

Coiled Tubing Operations – Equipment, Applications, Well Control, Safety & Emerging Technologies

The aim of this course is to enable the participants to gain key knowledge that they will require to actively and efficiently participate in the planning, design, and/or execution of a Coiled Tubing intervention.

LNG Markets, Pricing, Trading & Risk Management

This 3 full-day intensive intermediate level course will give you cutting-edge knowledge needed in today’s complex LNG market. Increase your knowledge and understanding of the LNG market and spot trading aspects by attending this course.

Project Economics, Risk and Decision Analysis for Oil & Gas

This 5 full-day training course looks at the setup of economic analysis cases, including the estimation of recoverable reserves, production profiles, commodity prices, and project costs – CAPEX, OPEX, taxes, royalties, transportation, depreciation, before-tax (BTAX) cash-flow, after-tax (ATAX) cash-flow and international fiscal regimes (production sharing agreement and concessionary system).

Smart Oilfield and Sensor Technology

This comprehensive 5-day course provides an in-depth exploration of smart oilfield and sensor technologies, equipping participants with the knowledge and skills to optimize hydrocarbon recovery through advanced digital solutions. The program begins with an introduction to smart wells and smart reservoirs, setting the foundation for understanding the principles of system optimization and control in the oil and gas industry.

Gas Flaring Abatement and Monetization

This comprehensive training course is designed to empower professionals with the knowledge, tools and insight into the location and size of every gas flared globally. Participants will deepen their understanding of how routine flaring can be converted into valuable products and monetized using proven, mobile and portable technologies and abating methods such as compression-to-pipeline (CTP), compressed natural gas (CNG), liquefied natural gas (LNG), gas to wire (GTW), gas to digital (GTD), ga...

Greenhouse Gas Accounting, Mitigation, Certification and Reporting

This 3-day training course is meticulously crafted for professionals interested to deepen their understanding of the greenhouse gas (GHG) accounting principles set forth by the GHG Protocol Corporate Standard, and to analyze the three standard emissions scopes 1, 2, 3. The course will also address the process for quantifying total greenhouse gases emissions produced directly and indirectly by industries.

Technical Report Writing and Presentation Skills In the AI Era - For Engineers, Scientists and Technical Professionals in The Energy Industry

The Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals course focuses on the unique needs of technical professionals who write for both technical and non-technical readers.

Chemical Engineering for Non-Chemical Engineers

This course provides a comprehensive introduction to the fundamental concepts and applications of chemical engineering. Designed for professionals from diverse backgrounds, this course bridges the gap between theory and practice, enabling participants to gain a solid understanding of chemical processes, equipment, and safety considerations relevant to various industries.

Floating Liquefied Natural Gas (FLNG) - Design and Technology

This comprehensive course offers an in-depth look at all facets of floating liquefied natural gas (FLNG) projects. Rather than focusing narrowly on engineering, the course provides a big picture view across various disciplines to fully understand FLNG liquefaction. Starting with an introduction to LNG and its behaviour aboard floating structures, the course covers important considerations like location selection and gas compositions that inform early project development. Detailed sections wal...

Advanced CO2 Storage Course & Site Visit

This 3-day Advanced CO2 Storage Course will give you powerful insights and skills that can be applied instantly to CO2 storage site selection, development and operations. Designed for CO2 storage site project managers, senior geologists and engineers and delivered by world-class experts, this course focuses on building a high-performance CO2 storage site development team and enhancing individual subsurface storage skills.

Flow Assurance for Offshore Production

The participants will have a total appreciation of the methodology required to develop offshore oil and gas fields and have an understanding of all of the Flow Assurance issues and technology requirements.

CO2 Transportation From Capture to Storage and Usage

The participants will have a total appreciation of the methodology required to develop a CO2 transportation system and have an understanding of all of the Flow Assurance, risks, and operating issues and technology requirements.

Energy Insurance and Risk Management

This course is designed to provide individuals with a detailed understanding of the key concepts and practices involved in providing insurance coverage to businesses in the energy industry. The course covers topics, including the types of risks that energy companies face, the different types of insurance policies available, and the factors that influence the cost of insurance premiums.

Petroleum Geology for Non-Geologists (Featuring Virtual Reality Trips)

This course has been designed to introduce these terms and provide an insight into how oil and gas are formed, how they are found and how they are extracted. Read More

Drilling Essentials for New Engineers and Non-Technical Professionals in Oil & Gas

Understand the urgency of drilling requests, know more about the cost implications of drilling-related problems, and understand the risks involved in a drilling contract.

Fundamentals of Seismic for Non-Geophysicists

This 5 full-day blended course will focus specifically on seismic data which is the main method used in the Oil & Gas industry.

Geomechanics at Well and Field Scale

This 5 full-day course starts with the determination of the stresses in the earth, the impact of different structural styles, salt bodies, faulting and folding on the orientation of the three main principal stress components.

Digital Oilfield: Managing Integrated and Digitalized Oil and Gas Assets- Digital Transformation from Theory to Practical Application

This course is designed to provide in-depth knowledge and practical insights into the implementation of digital technologies within upstream and midstream operations. The course will cover a comprehensive range of topics such as enabling technologies, real-time data collection, collaborative working, advanced digital technologies like Industrial Internet of Things (IIoT) and analytics, as well as the importance of change management. This course aims to equip participants with the necessary ex...

Hazardous Waste Management and Logistics for Upstream Oil and Gas

This course focuses on managing all wastes from oil and gas operations, with an emphasis on hazardous wastes that can impact human health and the environment. It covers the diversity of waste issues in the industry, regulatory frameworks, and structured waste management plans. The course details key roles and responsibilities for waste management actors. It outlines processes for waste minimization, transport, storage, treatment, and disposal, with a focus on proper hazardous waste protocols....

Methane Emissions Mitigation and Management for Oil and Gas Industry

This 3-day course provides comprehensive training on emissions management in the oil and gas industry. Through 15 practical modules, the course equips professionals with strategies and technologies to reduce greenhouse gases, methane, flaring, and fugitive emissions. The highly informative training will cover the history of emissions testing, key terms and definitions, industry best practices, equipment types, oil and gas process improvements, current emission reduction technologies, future ...

Integrated Field Development Planning

This course provides a comprehensive introduction to the technical and commercial aspects of field development planning in the oil and gas industry. This course considers the technical and commercial influences on Field Development Planning within the global oil and gas industry. It also considers the need for understanding field development choice, resource size, facility choice and cost. The course covers the full field development workflow from exploration and appraisal through concept sel...

Cost Estimation and Analysis of Well Abandonment Activities

Well Abandonment is commonly the largest area of expenditure in decommissioning oil and gas production assets and is often the area of largest cost overruns. Estimating the abandonment costs before the end of well life provides some unique challenges to the engineer and the cost estimator due to the potential step change impact of technical decisions and regulatory requirements.

Introduction to Carbon Capture and Storage (CCS) for Non-Technical Professionals

Carbon Capture and Storage (CCS) is an upcoming new technology that has a vital place within global efforts to decarbonise. It has a unique set of challenges, opportunities and risks to be understood and accommodated within appropriate legal, regulatory, and social and public licence frameworks. The course has a strong international and global south emphasis with case studies on CCS projects and will touch on the role of CCS in developing country energy transition. The course satisfies a part...

Exploration & Production (E&P) Accounting Level 3

This highly interactive 5-day training is aimed at those who wish to take their E&P accounting skills to a more advanced level than our introductory course, E&P Accounting - Level 1, and our intermediate course, E&P Accounting - Level 2.

Exploration & Production (E&P) Cost Control, Budgeting & Cost Estimation

This 3-day training will provide a comprehensive understanding on the nature of costs and cost drivers in the E&P industry.

Compressors & Pumps: Selection, Applications, Operation, Troubleshooting and Maintenance

This 5 full-day course will provide a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps

Exploration & Production (E&P) Accounting Level 2

The aim of this exclusive 5-days training course is to raise an intermediate level to your knowledge and understanding of international E&P finance and accounting.

Exploration & Production (E&P) Accounting Level 1

This 3-day introductory-level course is particularly suitable for finance personnel who are new to the oil and gas industry, or want to gain a broader understanding of oil and gas financial policy, joint venture and cost-control topic areas.

Auditing in the Exploration & Production (E&P) Industry Level 2

This 5-day intensive training course is designed to improve the skills of those involved in the financial and contractual auditing of upstream Oil & Gas Exploration and Production activities.

Auditing in the Exploration & Production (E&P) Industry Level 1

This 3-day introductory-level course is suitable for anyone who wants to gain a broader understanding of Upstream Oil & Gas Auditing – including joint venture, financial and contractual audits by government and regulatory authorities.

1) Finance for Non-Finance Professionals in Oil & Gas 2) Petroleum Fiscal Regimes & Applied Finance for Non-Finance Oil & Gas Professionals

This separately bookable 3 full-day course is not designed to skill Oil & Gas engineers to be accountants, but to give the participants the confidence and ability to communicate with accountants and finance managers and to improve their own financial decision making.

Advanced Turnaround, Shutdown and Outage Management

This 4 full-day course is based upon the Carcharodon “Best of the Best” model of excellence for shutdown management with inputs from people who have done it from the trenches along with some of the world’s most experienced shutdown specialists.

Prospect Risks & Volumes Assessment

This 3 full-day course explains how risks and volumes can be assessed in a realistic manner based on a sound understanding of the geological details of the prospect and its regional geological setting and our play understanding.

Trap & Fault-Seal Analysis, Modeling for Oil & Gas and CO2

Trap and seal analyses are discussed in this course from a pragmatic explorer’s point of view, based on the extensive experience of the instructor and on published case histories. Top seal and fault seal will both be addressed. The theoretical aspects of sealing that have been developed over the years will be explained, and case histories from different basin settings will be presented.

Power BI® – Business Data Analytics

This 3 full-day training course will introduce participants to the Microsoft Power BI® software solution for extracting, manipulating, visualising and analysing data. This is a very practical, hands-on course that takes participants through a series of exercises which help users understand the Power BI® environment, how to use the key areas of functionality, and how to apply the tools it contains to design and produce analyses of their own data.

Maintenance and Reliability Best Practices – Aligned with SMRP* Best Practices and the CMRP Certification Preparatory Course

This 4 full-day Maintenance and Reliability Masterclass course will provide Maintenance and Reliability personnel with a full explanation of the Award-winning Model of Excellence for maintenance.

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

AVO, Attributes and Inversion: Principles and Applications

This 5 full-day training course provides an understanding of the evolving role of seismic petrophysics through the use of amplitude variations with offset or angle (AVO/AVA), attributes, and inversion techniques. Understanding rock physics and the behaviour of the propagating seismic waves represents an integral part of the course, especially in the context of specific applications including enhanced seismic interpretation, rock and fluid characterization, including hydrocarbon identification...

Upstream Petroleum Economics

This comprehensive 3-day course is designed to provide participants with a solid foundation in upstream petroleum economics and energy project valuation. The program combines essential economic principles with practical applications, tailored for professionals in the oil and gas industry who need to make informed decisions about investments, project development, and resource management.

Technical Report Writing and Presentation Skills In the AI Era - For Engineers, Scientists and Technical Professionals in The Energy Industry

The Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals course focuses on the unique needs of technical professionals who write for both technical and non-technical readers.

Marginal Field Development and Planning

This course is designed to address the challenges and opportunities associated with the development and production of marginal oil and gas fields. These fields are typically characterized by small reserve sizes, lack of infrastructure, high development costs, and technological constraints, which have prevented their exploitation in the past.

Exploration Concepts for Tight Sand Plays

This 2-day intermediate-advanced level course provides a comprehensive understanding of tight oil and gas plays, which have gained significant importance in recent years due to technological advancements. Participants will gain in-depth exposure to the critical working elements and success factors of these unconventional reservoirs through an integrated approach.

Leadership & Team Dynamics in Oil & Gas

This popular 3 full-day course will equip you with key skills that you can utilise to maximise your staff’s performance in line with the company’s objectives.

Completion Design

This 5 full-day course is aimed at engineers and supervisors who already have a basic understanding of well construction methods but who would benefit from a more detailed knowledge of completion design.

Seismic Stratigraphic Interpretation in Different Basin Settings (Passive, Extensional, Convergent & Oblique)

Comprising 5 full-day sessions, this intermediate to advanced level course is specifically designed for senior exploration geoscientists currently active in hydrocarbon play and prospect mapping, to optimise conceptual geological input into their technical evaluation.

Operations Geology

This 4-day course aims to provide the participants with the foundational knowledge to be effective as an operations geologist. The course will comprise lectures interspersed with practical and interactive exercises as well as quizzes to promote better understanding for the participants.

Navigating Petrophysics: Log Analysis, LWD & Wireline

Targeted at awareness to knowledge level, this course addresses the tenets of petrophysics and formation evaluation, using integrative perspective of multiple datasets, including geological, geophysical, and logging and core data. Significant worldwide case histories are included, as well as several exercises designed to provide hands-on experience.

Seismic Stratigraphy and Depositional Systems: Predicting Reservoir Distribution, Geometry & Quality

This course aims at improving the conceptual geological understanding behind predicting presence and quality distribution of potential reservoirs.

Petroleum Risk Analysis & Portfolio Management

The Petroleum Risk Analysis and Portfolio Management course offers tools and practical techniques to identify, analyse and manage uncertainties and risk in exploration and production projects. Learning is reinforced by working on case material to explore uncertainties and risks in the context of production forecasting, cash-flow management, incremental projects and asset portfolio manipulation. Monte Carlo modelling and Decision Tree analysis software are employed during the course to dev...

Transforming Offshore Operations Embracing Unmanned Frameworks

Geological CO2 Storage - Picking the Right Reservoir

Geological sequestration of CO2 is emerging as an important tool to achieve net-zero greenhouse gas emissions by 2050 for combating global warming. Much of the technology used for CO2 sequestration is similar to existing oil and gas fields operations, however, there are important differences which require adaptation of the industry’s subsurface knowledge to this new application. The essential questions for any CO2 storage project are: (a) where can we store the CO2? (b) how much CO2 can we...

Negotiation Skills and Techniques for Engineers and Technical Professionals

This is a 2 full-day course that is aimed at providing professionals in the Oil & Gas business with a comprehensive set of core negotiating skills.

Project Management for Capital Projects

This comprehensive 3-day course offers an in-depth exploration of best practices for managing capital projects across their entire lifecycle. The program provides a robust framework for understanding and implementing key project management concepts, tools, and techniques.

Gas Treatment and Sulphur Recovery

This comprehensive 4-day course provides invaluable training on the processes used to treat natural gas and remove contaminants like acid gases (CO2 and H2S), mercury, BTEX, oxygen, nitrogen, and NORM. Participants will gain an in-depth understanding of the various solvent and non-solvent based treating processes, including chemical solvents (amines, hot potassium carbonate), physical solvents, hybrid solvents, membranes, cryogenics, solid beds, and scavengers. The course covers key selection...

Upstream Gas Conditioning and NGL Recovery

This course is an intermediate-level training program designed to provide a comprehensive understanding of the processes involved in conditioning natural gas and extracting valuable natural gas liquids (NGLs). Participants will gain in-depth knowledge of the physical and chemical properties of natural gas, phase behavior, and the various techniques employed to remove water and extract NGLs from raw gas streams.

Assessment Based Training - Python Programming & Analytics for the Oil & Gas Sector - Maximising Value from Data Assets

In the upcoming digital era, Python stands out as the language of the future for effective AI and data analytics implementation, particularly in the Oil and Gas sector. Its widespread adoption is attributed to extensive libraries, versatility, and a thriving community of developers consistently pushing the boundaries of the field. This training course will tailor a transformative learning experience for professionals in oil and gas.

Advanced Well Integrity Management

As oil prices continue to be volatile and margins remain low, operators are becoming increasingly sensitive to risks associated with well safety, operations and maintenance. This intensive 5 Day training course is designed to deepen your knowledge of well integrity management, and skills for designing, operating, and maintaining well equipment. The ultimate goal is to optimise productivity at the lowest Unit Operating Cost (UOC) and to maintain mechanical integrity throughout well life cycle.

Competency Management & Assurance in the Energy Industry

The 3 full-day course focuses on Competence Management Systems (CMS) which are typically in use within the Energy Industry, their structure and process development requirements.

Design, Planning and Executing in Heavy Lifting – Virtual Instructor Led Training (VILT)

Through the use of videos, animations, discussions and presentations, this 4 half-day advanced Virtual Instructor Led Training (VILT) course has been designed to train personnel with more than five years of experience and organisations involved with heavy lifting and transports and equip them with the relevant knowledge to prevent costly accidents and improve safety performance.

Optimising Gas Well Performance – Virtual Instructor Led Training (VILT)

This Virtual Instructor Led Training (VILT) not only serves the surveillance and capacity needs of existing gas wells but also the design requirements of new gas wells.

Topsides Processing Systems

This 3 day training course will demonstrate how these equipment are integrated in the layout on the facility deck. It is illustrated with FPSO process equipment, but is not limited to such systems.

LNG Markets, Pricing, Trading & Risk Management

This 3 full-day intensive intermediate level course will give you cutting-edge knowledge needed in today’s complex LNG market. Increase your knowledge and understanding of the LNG market and spot trading aspects by attending this course.

Carbon Pricing, Tax & Trading Policies: Energy Transition & Global Carbon Policies

The low-carbon energy transition initiatives focus on decarbonizing the energy industry and their respective economies as a whole. To achieve this, the role and potential for carbon pricing and carbon markets will be crucial. During this 3 full-day training course, participants will learn about the key policy issues and the main trends in emissions markets such as future carbon pricing and fiscal policy expectations.

Gas Conditioning and Processing

This 3 full-day course covers the design of systems for natural gas handling and treatment from the wellhead to the gas processing plant to achieve marketable products that meet desired product specifications.

Apollo Root Cause Analysis™ Methodology- Solve Complex Problems and Prevent Recurrences of Failures

The Apollo Root Cause Analysis™ methodology course is a comprehensive 2-day training designed to equip participants with the essential skills and knowledge for effective problem analysis and investigation. This course is particularly beneficial for professionals who regularly encounter incidents or failures that could recur, including those who lead investigations and produce reports.

Offshore Marine Operations and HSE Management Navigating Safety and Efficiency in Offshore Operations for Oil, Gas, and Wind Sectors

This course covers offshore marine operations and HSE (health, safety, and environment) management related to the oil and gas and offshore wind industries. The first module introduces the regulatory framework governing offshore operations, such as key conventions from the International Maritime Organization and the role of industry organizations and classification societies. It details various marine operations like loading, dynamic positioning, personnel transfer, as well as the types of ves...

Gas Flaring Abatement and Monetization

This comprehensive training course is designed to empower professionals with the knowledge, tools and insight into the location and size of every gas flared globally. Participants will deepen their understanding of how routine flaring can be converted into valuable products and monetized using proven, mobile and portable technologies and abating methods such as compression-to-pipeline (CTP), compressed natural gas (CNG), liquefied natural gas (LNG), gas to wire (GTW), gas to digital (GTD), ga...

Greenhouse Gas Accounting, Mitigation, Certification and Reporting

This 3-day training course is meticulously crafted for professionals interested to deepen their understanding of the greenhouse gas (GHG) accounting principles set forth by the GHG Protocol Corporate Standard, and to analyze the three standard emissions scopes 1, 2, 3. The course will also address the process for quantifying total greenhouse gases emissions produced directly and indirectly by industries.

Technical Report Writing and Presentation Skills In the AI Era - For Engineers, Scientists and Technical Professionals in The Energy Industry

The Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals course focuses on the unique needs of technical professionals who write for both technical and non-technical readers.

Budgeting & Forecasting In The Artificial Intelligence Era - Empowering Energy Finance Professionals

This dynamic 2-day training course is tailored for finance and accounting professionals in the energy sector. The participants will gain advanced Excel and Power BI skills, as well as the knowledge and skill to apply the power of AI to their processes. The participants will understand how ChatGPT works, how to leverage AI for enhanced budgeting and forecasting, and how to address confidentiality concerns.  The course showcases AI’s role in Power BI for analysis and reporting, as well as how ...

Completion Design

This 5 full-day course is aimed at engineers and supervisors who already have a basic understanding of well construction methods but who would benefit from a more detailed knowledge of completion design.

Offshore & Marine Supply Base Operations Management – For Servicing International E&P Fleet and Wind Farm Operations

This 3 full-day course is curated to enhance the skills and competencies of passionate professionals to plan and organise resources, minimise turnaround time for the vessels engaged in support of Offshore E & P operations.

Project Economics, Risk and Decision Analysis for Oil & Gas

This 5 full-day training course looks at the setup of economic analysis cases, including the estimation of recoverable reserves, production profiles, commodity prices, and project costs – CAPEX, OPEX, taxes, royalties, transportation, depreciation, before-tax (BTAX) cash-flow, after-tax (ATAX) cash-flow and international fiscal regimes (production sharing agreement and concessionary system).

Advanced Applied Petroleum Geomechanics

This five-day course provides an intermediate level of understanding of the geomechanical factors that affect wellbore instability, sand production and hydraulic fracture design. The course is structured such that upon completion, participants will have understood the value that geomechanics can bring to drilling, completion and production operations and will be able to leverage this value wherever it applies.

Practical Depth Conversion and Depth Imaging for the Interpreter

Transforming Offshore Operations Embracing Unmanned Frameworks

Advanced Heat Exchanger Design, Performance, Inspection, Maintenance and Operation

This 3-full day course will focus on the design, performance and operation of modern heat exchangers requires an understanding of the principles of heat transfer and fluid flow, coupled with access to numerically based techniques and supporting data. This course will review heat transfer fundamentals as applied to tubular and plate devices.

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS).

Introduction to Floating Production, Storage and Offloading Vessels (FPSO) - Design & Technology

This course has been designed to help participants to acquire the fundamental knowledge of FPSO Vessels (both New Builds, Tanker Conversions and Re-Deployment FPSOs) and to see why they are so widely used by the offshore industry.

Maintenance of Rotating Equipment: Diagnostic Testing, Troubleshooting, Maintenance, and Refurbishment

This 5 full-day course will provide a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all rotating equipment including centrifugal pumps, centrifugal and axial compressors, steam and gas turbines.

Maintenance Planning, Scheduling & Control

This course is based on an integrated maintenance model that has been used by leading companies and consultants with success and recognised as best practice.

Power BI® – Business Data Analytics

This 3 full-day training course will introduce participants to the Microsoft Power BI® software solution for extracting, manipulating, visualising and analysing data. This is a very practical, hands-on course that takes participants through a series of exercises which help users understand the Power BI® environment, how to use the key areas of functionality, and how to apply the tools it contains to design and produce analyses of their own data.

Upstream Petroleum Economics

This comprehensive 3-day course is designed to provide participants with a solid foundation in upstream petroleum economics and energy project valuation. The program combines essential economic principles with practical applications, tailored for professionals in the oil and gas industry who need to make informed decisions about investments, project development, and resource management.

Smart Oilfield and Sensor Technology

This comprehensive 5-day course provides an in-depth exploration of smart oilfield and sensor technologies, equipping participants with the knowledge and skills to optimize hydrocarbon recovery through advanced digital solutions. The program begins with an introduction to smart wells and smart reservoirs, setting the foundation for understanding the principles of system optimization and control in the oil and gas industry.

IFRS Accounting for the Oil and Gas Sector

This 3-day training covers the impact of diverse accounting practices for upstream business, accounting issues in development and production stage, and the disclosures in relation to oil & gas companies reserves.

TEMA & HTRI Heat Exchanger Design & Cost Saving Management – Virtual Instructor Led Training (VILT)

This intermediate level 5 half-day Virtual Instructor Led Training (VILT) course is a comprehensive course that explains the technology of shell and tube heat exchangers as these robust types of heat exchangers are the most commonly used in the process and refinery industries where they provide flexibility and are easy to maintain.

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

Production Sharing Contracts (PSC) & Related Agreements

This 3 full-day course examines the operational, fiscal and legal aspects of the different types of Production Sharing Contracts (PSC) in use around the world.

Petroleum Risk Analysis & Portfolio Management

The Petroleum Risk Analysis and Portfolio Management course offers tools and practical techniques to identify, analyse and manage uncertainties and risk in exploration and production projects. Learning is reinforced by working on case material to explore uncertainties and risks in the context of production forecasting, cash-flow management, incremental projects and asset portfolio manipulation. Monte Carlo modelling and Decision Tree analysis software are employed during the course to dev...

Exploration & Production (E&P) Accounting Level 3

This highly interactive 5-day training is aimed at those who wish to take their E&P accounting skills to a more advanced level than our introductory course, E&P Accounting - Level 1, and our intermediate course, E&P Accounting - Level 2.

Exploration & Production (E&P) Cost Control, Budgeting & Cost Estimation

This 3-day training will provide a comprehensive understanding on the nature of costs and cost drivers in the E&P industry.

Exploration & Production (E&P) Accounting Level 2

The aim of this exclusive 5-days training course is to raise an intermediate level to your knowledge and understanding of international E&P finance and accounting.

Exploration & Production (E&P) Accounting Level 1

This 3-day introductory-level course is particularly suitable for finance personnel who are new to the oil and gas industry, or want to gain a broader understanding of oil and gas financial policy, joint venture and cost-control topic areas.

Auditing in the Exploration & Production (E&P) Industry Level 2

This 5-day intensive training course is designed to improve the skills of those involved in the financial and contractual auditing of upstream Oil & Gas Exploration and Production activities.

Auditing in the Exploration & Production (E&P) Industry Level 1

This 3-day introductory-level course is suitable for anyone who wants to gain a broader understanding of Upstream Oil & Gas Auditing – including joint venture, financial and contractual audits by government and regulatory authorities.

Trap & Fault-Seal Analysis, Modeling for Oil & Gas and CO2

Trap and seal analyses are discussed in this course from a pragmatic explorer’s point of view, based on the extensive experience of the instructor and on published case histories. Top seal and fault seal will both be addressed. The theoretical aspects of sealing that have been developed over the years will be explained, and case histories from different basin settings will be presented.

Prospect Maturation

This 5 full day course will cover all aspects of the prospect maturation process: play understanding in the context of regional geological understanding, detailed prospect evaluation; realistic risk & volume assessment consistent with the play understanding and prospect details, and an introduction to exploration economics.

Applied E&P Economics - Commercial Decisions & Fiscal Systems

This training course aims to provide a solid and incisive foundation to appreciate the essentials of building typical Economic Evaluations to support both National and Company decisions with particular focus on the many potential deductions and charges levied on the pre-tax ‘Technical Case’. We will touch on many critical aspects of these post-tax / contract decisions, such as balancing scope for value-generation and efficiency – which measures are employed, how national agencies might b...

Technical Report Writing and Presentation Skills In the AI Era - For Engineers, Scientists and Technical Professionals in The Energy Industry

The Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals course focuses on the unique needs of technical professionals who write for both technical and non-technical readers.

Gas and LNG Contracts, Markets and Strategy - Structuring and Negotiating Gas & LNG Contracts that Optimize Value for your Organization

The comprehensive agenda covers key gas/LNG agreements across the contractual chain and deep-dive into practical issues and solutions in contract terms, risk management, pricing mechanisms, arbitrage techniques, and more. This highly practical course enables you to approach gas/LNG contracting with new confidence and expertise. You can implement learning through interactive workshops focused on optimizing contractual and commercial outcomes.

Project Economics, Risk and Decision Analysis for Oil & Gas

This 5 full-day training course looks at the setup of economic analysis cases, including the estimation of recoverable reserves, production profiles, commodity prices, and project costs – CAPEX, OPEX, taxes, royalties, transportation, depreciation, before-tax (BTAX) cash-flow, after-tax (ATAX) cash-flow and international fiscal regimes (production sharing agreement and concessionary system).

Practical Depth Conversion and Depth Imaging for the Interpreter

Exploration & Production (E&P) Accounting Level 3

This highly interactive 5-day training is aimed at those who wish to take their E&P accounting skills to a more advanced level than our introductory course, E&P Accounting - Level 1, and our intermediate course, E&P Accounting - Level 2.

Exploration & Production (E&P) Cost Control, Budgeting & Cost Estimation

This 3-day training will provide a comprehensive understanding on the nature of costs and cost drivers in the E&P industry.

Exploration & Production (E&P) Accounting Level 2

The aim of this exclusive 5-days training course is to raise an intermediate level to your knowledge and understanding of international E&P finance and accounting.

Exploration & Production (E&P) Accounting Level 1

This 3-day introductory-level course is particularly suitable for finance personnel who are new to the oil and gas industry, or want to gain a broader understanding of oil and gas financial policy, joint venture and cost-control topic areas.

Auditing in the Exploration & Production (E&P) Industry Level 2

This 5-day intensive training course is designed to improve the skills of those involved in the financial and contractual auditing of upstream Oil & Gas Exploration and Production activities.

Auditing in the Exploration & Production (E&P) Industry Level 1

This 3-day introductory-level course is suitable for anyone who wants to gain a broader understanding of Upstream Oil & Gas Auditing – including joint venture, financial and contractual audits by government and regulatory authorities.

Negotiation Skills and Techniques for Engineers and Technical Professionals

This is a 2 full-day course that is aimed at providing professionals in the Oil & Gas business with a comprehensive set of core negotiating skills.

Competency Management & Assurance in the Energy Industry

The 3 full-day course focuses on Competence Management Systems (CMS) which are typically in use within the Energy Industry, their structure and process development requirements.

Carbon Pricing, Tax & Trading Policies: Energy Transition & Global Carbon Policies

The low-carbon energy transition initiatives focus on decarbonizing the energy industry and their respective economies as a whole. To achieve this, the role and potential for carbon pricing and carbon markets will be crucial. During this 3 full-day training course, participants will learn about the key policy issues and the main trends in emissions markets such as future carbon pricing and fiscal policy expectations.

Design, Planning and Executing in Heavy Lifting – Virtual Instructor Led Training (VILT)

Through the use of videos, animations, discussions and presentations, this 4 half-day advanced Virtual Instructor Led Training (VILT) course has been designed to train personnel with more than five years of experience and organisations involved with heavy lifting and transports and equip them with the relevant knowledge to prevent costly accidents and improve safety performance.

Topsides Processing Systems

This 3 day training course will demonstrate how these equipment are integrated in the layout on the facility deck. It is illustrated with FPSO process equipment, but is not limited to such systems.

Advanced Well Integrity Management

As oil prices continue to be volatile and margins remain low, operators are becoming increasingly sensitive to risks associated with well safety, operations and maintenance. This intensive 5 Day training course is designed to deepen your knowledge of well integrity management, and skills for designing, operating, and maintaining well equipment. The ultimate goal is to optimise productivity at the lowest Unit Operating Cost (UOC) and to maintain mechanical integrity throughout well life cycle.

Gas Conditioning and Processing

This 3 full-day course covers the design of systems for natural gas handling and treatment from the wellhead to the gas processing plant to achieve marketable products that meet desired product specifications.

Sand Control Design and Technology

The business of fuelling the world through hydrocarbon production must be carried out with optimum profitability. Participants will learn how sand production and inadvertent formation damage can erode these profits. Methods and procedures will be presented to guide the participants in decision making with regards to completing a well with optimum control of formation sand while incurring minimal damage to the well or production zone. Extensive theory will be presented illustrating why certain...

Completion Design

This 5 full-day course is aimed at engineers and supervisors who already have a basic understanding of well construction methods but who would benefit from a more detailed knowledge of completion design.

Maintenance Planning, Scheduling & Control

This course is based on an integrated maintenance model that has been used by leading companies and consultants with success and recognised as best practice.

Advanced Applied Petroleum Geomechanics

This five-day course provides an intermediate level of understanding of the geomechanical factors that affect wellbore instability, sand production and hydraulic fracture design. The course is structured such that upon completion, participants will have understood the value that geomechanics can bring to drilling, completion and production operations and will be able to leverage this value wherever it applies.

Advanced Heat Exchanger Design, Performance, Inspection, Maintenance and Operation

This 3-full day course will focus on the design, performance and operation of modern heat exchangers requires an understanding of the principles of heat transfer and fluid flow, coupled with access to numerically based techniques and supporting data. This course will review heat transfer fundamentals as applied to tubular and plate devices.

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS).

Introduction to Floating Production, Storage and Offloading Vessels (FPSO) - Design & Technology

This course has been designed to help participants to acquire the fundamental knowledge of FPSO Vessels (both New Builds, Tanker Conversions and Re-Deployment FPSOs) and to see why they are so widely used by the offshore industry.

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

Production Sharing Contracts (PSC) & Related Agreements

This 3 full-day course examines the operational, fiscal and legal aspects of the different types of Production Sharing Contracts (PSC) in use around the world.

Apollo Root Cause Analysis™ Methodology- Solve Complex Problems and Prevent Recurrences of Failures

The Apollo Root Cause Analysis™ methodology course is a comprehensive 2-day training designed to equip participants with the essential skills and knowledge for effective problem analysis and investigation. This course is particularly beneficial for professionals who regularly encounter incidents or failures that could recur, including those who lead investigations and produce reports.

Train the Trainer (TTT) Programme

The "Train the Trainer" course is an intensive four-day workshop designed to equip corporate trainers with essential skills needed for effective training delivery. This course is ideal for both experienced subject-matter experts with limited training experience and seasoned trainers seeking to refine their techniques. The course covers critical aspects such as training needs analysis, session planning, and creating a conducive learning environment.

Transforming Offshore Operations Embracing Unmanned Frameworks

Project Management for Capital Projects

This comprehensive 3-day course offers an in-depth exploration of best practices for managing capital projects across their entire lifecycle. The program provides a robust framework for understanding and implementing key project management concepts, tools, and techniques.

Offshore Marine Operations and HSE Management Navigating Safety and Efficiency in Offshore Operations for Oil, Gas, and Wind Sectors

This course covers offshore marine operations and HSE (health, safety, and environment) management related to the oil and gas and offshore wind industries. The first module introduces the regulatory framework governing offshore operations, such as key conventions from the International Maritime Organization and the role of industry organizations and classification societies. It details various marine operations like loading, dynamic positioning, personnel transfer, as well as the types of ves...

Advanced Leadership and Management in the Oil and Gas Industry

This 5-Half day aim to develop the competences of leaders to achieve high performance teams and drive the effectiveness and productivity of the organization. In today’s world organizations are facing the biggest transformation in history and with it challenges for leaders and employees. Innovation is necessary for the workplace to stay relevant and competitive in rapidly changing markets. Great leadership is vital in unleashing employee performance, potential and impact.

Advanced Field Development Planning & Drive Performance

This 5-day course is aimed at pulling together the work of the all the technical specialists involved in oil/gas field development, both subsurface and surface, to realize the full value of a truly integrated Field Development Plan. It is assumed that each participant (geologist, reservoir engineer, well engineer, facilities engineer, cost engineer etc.) is an expert in their own discipline and wants to learn how to work more effectively in a team. All the courses are therefore of interest to...

Gas Treatment and Sulphur Recovery

This comprehensive 4-day course provides invaluable training on the processes used to treat natural gas and remove contaminants like acid gases (CO2 and H2S), mercury, BTEX, oxygen, nitrogen, and NORM. Participants will gain an in-depth understanding of the various solvent and non-solvent based treating processes, including chemical solvents (amines, hot potassium carbonate), physical solvents, hybrid solvents, membranes, cryogenics, solid beds, and scavengers. The course covers key selection...

Upstream Gas Conditioning and NGL Recovery

This course is an intermediate-level training program designed to provide a comprehensive understanding of the processes involved in conditioning natural gas and extracting valuable natural gas liquids (NGLs). Participants will gain in-depth knowledge of the physical and chemical properties of natural gas, phase behavior, and the various techniques employed to remove water and extract NGLs from raw gas streams.

Introduction To Oil and Gas Business - Journey Through the Oil & Gas Lifecycle

Embark on a comprehensive, jargon-busting exploration of the Oil and Gas industry with our custom-designed course tailored specifically for Petroleum Sarawak. This unique program is meticulously crafted to align with the region's distinct needs and challenges, offering a focused examination of the industry's lifecycle. From the roots of hydrocarbon exploitation to cutting-edge carbon capture technologies, delve into every facet of the sector's operations.

Technical Report Writing and Presentation Skills In the AI Era - For Engineers, Scientists and Technical Professionals in The Energy Industry

The Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals course focuses on the unique needs of technical professionals who write for both technical and non-technical readers.

Methane Emissions Mitigation and Management for Oil and Gas Industry - Virtual Instructor-Led Training (VILT)

This 5 half-days course provides comprehensive training on emissions management in the oil and gas industry. Through 15 practical modules, the course equips professionals with strategies and technologies to reduce greenhouse gases, methane, flaring, and fugitive emissions. The highly informative training will cover the history of emissions testing, key terms and definitions, industry best practices, equipment types, oil and gas process improvements, current emission reduction technologies, f...

CO2 Sequestration and Enhanced Oil Recovery

This 5-day training course offers a comprehensive exploration of the interconnected technologies of Carbon Capture, Utilization, and Storage (CCUS) and CO2 Enhanced Oil Recovery (EOR). Participants will delve into the world of CCUS, understanding how they can capture CO2 emissions from various sources and explore the different pathways for utilization and safe geological storage. They will gain a thorough understanding of the various capture technologies, storage options, and the potential of...

Hydrogen Production with Integrated CO2 Capture and Geological Storage (CCS) - Shaping A Sustainable Hydrogen Ecosystem

Hydrogen is gaining momentum as a critical energy source for enabling the global transition to a low-carbon future. However, most hydrogen today is produced from fossil fuels through processes that generate high carbon emissions. Integrating carbon capture and storage (CCS) technologies with hydrogen production can help reduce emissions and unlock hydrogen's potential as a clean energy carrier. Furthermore, the application of hydrogen as an alternative future fuel has become the primary objec...

Data Analytics Workflows for Artificial Lift, Production and Facility Engineers – Virtual Instructor Led Training (VILT)

In this 3 Half day training course, the participants learn some data analysis and data science techniques and workflows applied to petroleum production (specifically artificial lift) while reviewing code and practicing.

Produced Water for Upstream Oil and Gas Proven Sustainable Technologies with Lower Maintenance Virtual Instructor Led Training (VILT)

Produce water for upstream oil and gas course is designed to provide you with a deep understanding of produced water and its treatment in the context of the oil and gas industry. Produced water, the water that comes to the surface during oil and gas production, presents unique challenges and requires specialized treatment to ensure compliance with environmental regulations and to protect the surrounding ecosystems.

Mature Field Development and Management – Virtual Instructor Led Training (VILT)

This course takes groups through these issues, fills any knowledge gaps in the essential technical fundamentals required for mature field development planning in support of a chosen strategy. Course content designed to give participants an appreciation of the evaluation and planning activities associated mature oil and gas field management.

Introduction to Carbon Capture and Storage (CCS) for Non-Technical Professionals (2 Days)

Carbon Capture and Storage (CCS) is an upcoming new technology that has a vital place within global efforts to decarbonise. It has a unique set of challenges, opportunities and risks to be understood and accommodated within appropriate legal, regulatory, and social and public licence frameworks. The course has a strong international and global south emphasis with case studies on CCS projects and will touch on the role of CCS in developing country energy transition. The course satisfies a part...

Assessment Based Training - Python Programming & Analytics for the Oil & Gas Sector - Maximising Value from Data Assets

In the upcoming digital era, Python stands out as the language of the future for effective AI and data analytics implementation, particularly in the Oil and Gas sector. Its widespread adoption is attributed to extensive libraries, versatility, and a thriving community of developers consistently pushing the boundaries of the field. This training course will tailor a transformative learning experience for professionals in oil and gas.

Fundamentals of Data Communications for Upstream Operations In Oil and Gas

This comprehensive 5-day training course covers the fundamentals of communication systems and solutions critical for upstream operations in modern oil and gas sites. As oil and gas operations become more complex and distributed, reliable and robust communication systems are essential for efficient operations and safety.

The Automated Oilfield: AI and Drilling Optimization

This 2 full-day course explores real-world applications of automation, types of automated drilling systems, monitoring & control techniques, simulation implementation, and more. Attendees will gain insights into developing a strategic roadmap to integrate automation, including human-machine interaction considerations.

Decision-based Geothermal Field Development

Introduction to Geothermal Exploration and Development

This introductory course provides a comprehensive overview of geothermal energy fundamentals for those looking to enter or transition into the industry. The course will equip participants across technical with awareness of how geothermal projects progress from initial exploration through early development phases. Participants will exit better prepared to contribute to strategic and economic decisions in their own geothermal organizations and assets.

Gas and LNG Contracts, Markets and Strategy - Structuring and Negotiating Gas & LNG Contracts that Optimize Value for your Organization

The comprehensive agenda covers key gas/LNG agreements across the contractual chain and deep-dive into practical issues and solutions in contract terms, risk management, pricing mechanisms, arbitrage techniques, and more. This highly practical course enables you to approach gas/LNG contracting with new confidence and expertise. You can implement learning through interactive workshops focused on optimizing contractual and commercial outcomes.

Certified Asset Management Assessor (CAMA) Certification Preparatory Course

The CAMA Course provides the asset management knowledge to enable course participants to perform the role of an auditor/assessor and undertake activities as a member of a team of auditors/assessors. This course is designed to give individuals an efficient overview of the recommended preparation material for the CAMA Exam. These materials provide insight into: (1) the ISO 5500x framework of documents, (2) the GFMAM Asset Management Landscape and (3) the GFMAM Competency Specification which ind...

API 570: Piping Inspector Certification Preparatory Course

This program is designed for in depth understanding of Inspection of piping and pipelines under operation and in-service as per API 570. This preparatory course will prepare inspectors to ensure piping and pipeline integrity in service. Practical aspect of design considerations, sizing, rating, piping and pipeline integrity, internal inspections, analysis, repair, pressure testing, and pipeline protection shall be discussed. The program shall also provide more information about types of pipin...

Tripod Beta Practitioner - Preparatory Course - Bronze Level

This course focuses on the knowledge, mindset, tools and skills required to perform a full incident analysis process using Tripod Beta. The training program offers thorough knowledge of the methodology, as well as the philosophy (science) behind Tripod Beta. In addition, it covers the full investigation process, meaning of objectives in an incident investigation; insight into the incident investigation process; organizing an investigation; collecting data/evidence; drafting a timeline; commun...

Sustainable Management of Produced Water using Green and Circular Solutions - Leveraging Nature-based Solutions

In an era of increasing environmental awareness and resource scarcity, the responsible management of produced water from industrial processes, particularly within the context of the energy sector, has become paramount. As industries worldwide strive to balance their operational needs with environmental stewardship, finding innovative and sustainable solutions for the management of produced water has emerged as a pressing concern. In this evolving landscape, it has become clear that traditiona...

Seismic Interpretation in Fold and Thrust Belts

This course provides an overview on how the use of the concepts of structural geology can be applied to make better structural interpretations. The principles behind the construction of balanced cross-sections are discussed. The participants will learn theoretical and technical approaches to seismic structural interpretation of compressional structures illustrated by numerous examples from around the world and experienced by hands-on exercises.

Seismic Interpretation in Carbonates

This course introduces to the complexity associated to carbonate sequences and the best way to characterize them using 2D and 3D seismic. Several case studies from around the world will be also shown. In each module various examples from around the world and from different tectonic settings and different carbonate depositional settings will be shown. Most of the modules will have also real case studies with 2D and 3D seismic to better explain and visualize the key concepts.

HPHT Well Design and Operations

This course is delivered as a scenario-based course to provide knowledge of High-Pressure and High-Temperature (HPHT) well design, drilling and completion operations. The course is specifically designed to provide an understanding of the challenges associated with the design and construction of HPHT wells. The course guides the participants to work through the various well design aspects starting from a geological well proposal with an estimated formation pressure and temperature profile. Wor...

Budgeting & Forecasting In The Artificial Intelligence Era - Empowering Energy Finance Professionals

This dynamic 2-day training course is tailored for finance and accounting professionals in the energy sector. The participants will gain advanced Excel and Power BI skills, as well as the knowledge and skill to apply the power of AI to their processes. The participants will understand how ChatGPT works, how to leverage AI for enhanced budgeting and forecasting, and how to address confidentiality concerns.  The course showcases AI’s role in Power BI for analysis and reporting, as well as how ...

Best Practices in Industrial Wastewater Treatment - Protecting Industry and the Environment

This course will guide delegates through all the elements involved in the treatment of industrial effluent. Delegates will receive a thorough grounding in all aspects of wastewater treatment plant design, operation and maintenance, as well as in depth information on all the latest technological developments in the field. This highly interactive course will be delivered using a combination of lectures, groupwork and individual exercises, together with video presentations. Delegates will work w...

Digital Innovation in Oil and Gas - Virtual Instructor Led Training (VILT)

This course provides a comprehensive exploration of the transformative impact of digital technologies in the energy sector. Participants will gain a deep understanding of how digital innovation is revolutionizing exploration, production, supply chain management, and sustainability efforts within the oil and gas industry.

Pipeline Defect Assessment - Virtual Instructor-Led Training (VILT)

This course provides a broad overview of analysis methods for defects in pipeline. The course begins with a summary of important material properties and a review of integrity assessment methods for pipeline defects. Analysis methods for corrosion are covered, including each of the methods cited in the most recent version of ASME B31G – Manual for Determining the Remaining Strength of Corroded Pipelines.

PRMS & SEC Resources Evaluation and Reporting - Virtual Instructor Led Training (VILT)

This course will present the elements of the Petroleum Resources Management System (PRMS) and its resources classification framework, a systematic way of placing all petroleum initially in place in an accumulation into a convenient inventory. Resources are classified based on their probabilities of becoming commercial and placed into categories within classes based on their relative certainty of being produced.

Energy Insurance and Risk Management – Virtual Instructor Led Training (VILT)

This course is designed to provide individuals with a detailed understanding of the key concepts and practices involved in providing insurance coverage to businesses in the energy industry. The course covers topics, including the types of risks that energy companies face, the different types of insurance policies available, and the factors that influence the cost of insurance premiums.

World Fiscal Systems for Oil and Gas

This 2.5-day interactive computer-based training course provides participants with an intimate knowledge of petroleum upstream fiscal systems. At the same time, the rapid current developments in energy transition requires significant attention to this issue. Therefore, the participants will learn the impact of renewable resources and hydrogen on the petroleum industry and structuring of new petroleum-energy arrangements.

Structural Interpretation of Seismic Data

The 5-day course introduces the nature and evolution of simple and complex structures and how to interpret them. The course also discusses the timing of structures relative to hydrocarbon generation and migration and the consequent risk or COS. The following structures are covered: Introduction, Extension, Inversion, Strike-Slip and Salt. The participants can assess the workflows required for successful structural analysis and apply the necessary after the course. The course uses a mixture of...

Corrosion Management

This course provides the basis for understanding systematic management of corrosion in relation to wider asset integrity management. It provides the strategies and tools required to implement an effective corrosion management system. The content uses oil and gas production to explain the concepts, but the principles can be applied to any industry sector where corrosion is a significant factor. Participants will also benefit from an appreciation of the influence of corrosion prevention and con...

Geological CO2 Storage - Picking the Right Reservoir

Geological sequestration of CO2 is emerging as an important tool to achieve net-zero greenhouse gas emissions by 2050 for combating global warming. Much of the technology used for CO2 sequestration is similar to existing oil and gas fields operations, however, there are important differences which require adaptation of the industry’s subsurface knowledge to this new application. The essential questions for any CO2 storage project are: (a) where can we store the CO2? (b) how much CO2 can we...

Understanding and Implementing Sustainability in Oil and Gas Industry

As hydrocarbons will remain a core part of the global energy mix for the foreseeable future, companies will need to develop proactive and transparent sustainability strategies that maintain their license to operate in their traditional business, whilst identifying and securing new opportunities arising from the transition to a low carbon economy. In the final analysis, in order to remain attractive to investors and society in general, oil and gas companies will need to develop and communicate...

Produced Water for Upstream Oil and Gas - Proven Sustainable Technologies with Lower Maintenance

Produce water for upstream oil and gas course is designed to provide you with a deep understanding of produced water and its treatment in the context of the oil and gas industry. Produced water, the water that comes to the surface during oil and gas production, presents unique challenges and requires specialized treatment to ensure compliance with environmental regulations and to protect the surrounding ecosystems.

Converting Oil and Gas Assets for Sustainable Development - Virtual Instructor Led Training (VILT)

As hydrocarbon assets decrease mainstream production, their infrastructure become redundant. Operators must decide whether to decommission the assets or attempt to repurpose them for handling, transport, and storage operations in the CO2, hydrogen and geothermal sectors. Workflows, checklists, screening tools, cost adjustment and ready reckoners are discussed to help those involved in the rapidly developing business environment of energy transition.

Asset Integrity & Life Extension

Asset life extension allows organizations to maximize the utilization of their resources. Instead of discarding assets prematurely, they can continue to extract value from them by leveraging their remaining useful life. This is especially beneficial when assets are still capable of meeting operational requirements and no compelling reasons for replacement exist. By extending the life of existing assets, organizations also help to conserve resources, reduce waste generation, and minimize their...

Advanced Heat Exchanger Design, Performance, Inspection, Maintenance and Operation

This 3-full day course will focus on the design, performance and operation of modern heat exchangers requires an understanding of the principles of heat transfer and fluid flow, coupled with access to numerically based techniques and supporting data. This course will review heat transfer fundamentals as applied to tubular and plate devices.

Tripod Beta Practitioner - Bronze Level - Preparatory Course - Virtual Instructor Led Training (VILT)

Tripod can be used in any area of business where the organisation has a management system in place to prevent unwanted events e.g., health, safety, environment, quality, security, productivity, project management, and many more. And, it is used in many industries e.g., marine, airlines, rail, oil and gas, health care, construction and many more.

Upstream Decarbonization: Strategies & Measures towards Lowering Emissions

This 2-day training course will provide participants with an understanding of the strategies and measures for decarbonizing the Upstream Oil and Gas sector within the framework of measures implemented by individual governments through their respective commitments to reduce emissions to achieve their National Determined Contribution under the Paris Agreement.

Best Practices Procurement for Carbon Offsets in the Energy Industry

In this highly interactive training course, your course instructor will guide you through the latest developments and best procurement practices to successfully operate in the voluntary carbon market.

Introduction to Bowties: E-Learning Course

The objectives of this course are for you to understand the bowtie structure and the ingredients needed to create a successful and impactful bowtie. It will familiarise you with the structure and components of the bowtie with interactive scenario development. This course is accessible on any modern internet browser. Complete on-demand and at your pace. All you need is your computer or tablet and you’re set. Sign up for the demo to see how it works.

Introduction to Process Safety: E-Learning Course

Process safety focuses on preventing fires, explosions, and accidental chemical releases of hazardous substances through the application of good management and design principles. Process safety incidents can have catastrophic effects and can result in multiple injuries or fatalities, as well as substantial economic, asset, and environmental damage. We have designed this Process Safety E-Learning course to educate all that are involved with hazardous operations from operations to leadership.

HAZOP Participants: E-Learning Course

HAZOP is a critical part of the process safety ecosystem, which drives benefits in facility design and operation. If you are a Leader or Participant, training will help your facility put quality into this important safety assessment process through effective facilitation, organisation and participation. The objectives of this course are to convey the benefits of HAZOP and the role of the HAZOP review in the process safety framework. It will familiarise the participants with the structure of t...

 Reservoir Geochemistry

This course focuses on methods and applications of petroleum reservoir geochemistry. It is designed for geoscientists, including geochemists, production and development geologists, reservoir engineers, but could also benefit exploration geologists and project managers

Mature Field Development and Management

This course takes groups through these issues, fills any knowledge gaps in the essential technical fundamentals required for mature field development planning in support of a chosen strategy. Course content designed to give participants an appreciation of the evaluation and planning activities associated mature oil and gas field management.

Well Test Analysis in Practice

This 5-day training course enables participants to learn and understand the fundamental concepts of well test analysis. The methodology described in the course, which has become the standard of the industry, presents a systematic way of interpreting well tests in homogeneous and heterogeneous reservoirs, including fissured and multilayered systems. Recommendations for designing tests in such formations, examples, and problem-solving sessions for practical experience and immediate application...

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS).

Seismic Uncertainty Evaluation

This 5-day course attempts to demystify the black-box approach in velocity analytics, depth conversion, and approaches to uncertainty estimations. Seismic uncertainty is a key parameter affecting the accuracy of the information contained in static and dynamic reservoir models. However, quantifying and qualifying its impact on key reservoir properties, in-place volume reserves and dynamic simulation during drilling remains a challenge. Due to the limitation of the workflows and non-standardize...

Introduction to Carbon Capture and Storage (CCS) for Non-Technical Professionals

Carbon Capture and Storage (CCS) is an upcoming new technology that has a vital place within global efforts to decarbonise. It has a unique set of challenges, opportunities and risks to be understood and accommodated within appropriate legal, regulatory, and social and public licence frameworks. The course has a strong international and global south emphasis with case studies on CCS projects and will touch on the role of CCS in developing country energy transition. The course satisfies a part...

Gas Lift Design & Optimization using NODAL Analysis

This 5-day training course is designed to give participants a thorough understanding of gas-lift technology and related application concepts.

Making Major Investment Decisions Under Uncertainty in The Energy Sector

This fast paced 3-day training course will address topics related to the world of energy with a purpose to provide a holistic perspective on the theme of investment decision making. The course modules will not specifically focus on one technique but an array of tools and methods to improve the investment decision making process.

Well Design & Construction

This Well Design and Construction course is designed to provide participants with a robust knowledge of well engineering principles. Based on the global practices, and standards and using real examples, it represents how well engineering is managed in the oil and gas industry.

Energy Insurance and Risk Management

This course is designed to provide individuals with a detailed understanding of the key concepts and practices involved in providing insurance coverage to businesses in the energy industry. The course covers topics, including the types of risks that energy companies face, the different types of insurance policies available, and the factors that influence the cost of insurance premiums.

Introduction to Floating Production, Storage and Offloading Vessels (FPSO) - Design & Technology

This course has been designed to help participants to acquire the fundamental knowledge of FPSO Vessels (both New Builds, Tanker Conversions and Re-Deployment FPSOs) and to see why they are so widely used by the offshore industry.

Exploration & Production (E&P) Accounting Level 3

This highly interactive 5-day training is aimed at those who wish to take their E&P accounting skills to a more advanced level than our introductory course, E&P Accounting - Level 1, and our intermediate course, E&P Accounting - Level 2.

Exploration & Production (E&P) Cost Control, Budgeting & Cost Estimation

This 3-day training will provide a comprehensive understanding on the nature of costs and cost drivers in the E&P industry.

Subsea Pipeline Design and Construction

This course will cover design and construction of subsea pipelines with respect to: design for pressure containment, design for collapse, on-bottom stability, freespans, global (lateral and upheaval buckling), corrosion, materials selection, cathodic protection and coatings

Front End Loading in Oil and Gas Projects

Front End Loading (FEL) is a methodology that takes a deliberate approach to capital project planning. Where traditional project plans seek to help an operator reach production targets and budgets, FEL methodology aligns an operator’s technical and business goals to create a more comprehensive development plan. The FEL approach increases project definition and lowers risk to positively impact total investment costs and return on investment.

Fundamentals of Gas Well Deliquification

This 5 full-day course will first show how to predict and recognize liquid loading. Next, it will describe how to select, design, install and operate the best sequence of deliquification measures. It will also consider deliquification in the presence of other production threats such as water production and halite blockage.

Compressors & Pumps: Selection, Applications, Operation, Troubleshooting and Maintenance

This 5 full-day course will provide a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps

Exploration & Production (E&P) Accounting Level 2

The aim of this exclusive 5-days training course is to raise an intermediate level to your knowledge and understanding of international E&P finance and accounting.

Exploration & Production (E&P) Accounting Level 1

This 3-day introductory-level course is particularly suitable for finance personnel who are new to the oil and gas industry, or want to gain a broader understanding of oil and gas financial policy, joint venture and cost-control topic areas.

Auditing in the Exploration & Production (E&P) Industry Level 2

This 5-day intensive training course is designed to improve the skills of those involved in the financial and contractual auditing of upstream Oil & Gas Exploration and Production activities.

Auditing in the Exploration & Production (E&P) Industry Level 1

This 3-day introductory-level course is suitable for anyone who wants to gain a broader understanding of Upstream Oil & Gas Auditing – including joint venture, financial and contractual audits by government and regulatory authorities.

Tripod Beta Practitioner - Preparatory Course - Silver Level

This 2-day workshop follows on from the Tripod Beta bronze level course, it gives the rules and guidelines relating to how a Tripod Beta investigation and analysis is performed. This silver level workshop provides the opportunity to apply this knowledge to one of your own incidents which helps to place the theory into the context of your own workplace.

Electrical Engineering for Non-Electrical Engineers

This 5 full-day course is for individuals who would like to gain a thorough understanding of all the principles of electrical engineering in a simple and easy to grasp format.

Maintenance of Rotating Equipment: Diagnostic Testing, Troubleshooting, Maintenance, and Refurbishment

This 5 full-day course will provide a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all rotating equipment including centrifugal pumps, centrifugal and axial compressors, steam and gas turbines.

(A) Energy Transition and (B) Fiscal Systems for Oil and Gas

The 4.5-day interactive computer-based training course provides participants with an intimate knowledge of petroleum upstream fiscal systems. At the same time, the rapid current developments in energy transition requires significant attention to this issue. Therefore, the participants will learn the impact of renewable resources and hydrogen on the petroleum industry and structuring of new petroleum-energy arrangements.

CO2 Capture, Processing & Technologies - Virtual Instructor Led Training (VILT)

This course will cover the technology and costs of CCS capture technologies with a focus and will include discussion on the main factors affecting separation, their technology readiness and levelized costs.

Upstream Petroleum Economics, Risk and Fiscal Analysis

The 3-day hands-on petroleum economics training course provides a comprehensive overview of the practices of exploration and development petroleum economics and its application in valuing oil and gas assets to aid corporate decisions.

Advanced Well Engineering

This 3 full-day course aims to further develop and assess the knowledge required to work on and eventually, authorize a well delivery program as deemed fit for purpose.

Petroleum Geology for Non-Geologists (Featuring Virtual Reality Trips)

This course has been designed to introduce these terms and provide an insight into how oil and gas are formed, how they are found and how they are extracted. Read More

Basin Analysis and Petroleum Systems

This 5 full-day course will focus on geological fundamentals: how different basin types differ in subsidence mechanisms, basin cycles, heat flow through time, depositional systems, structural styles and their type of petroleum systems.

Drilling Essentials for New Engineers and Non-Technical Professionals in Oil & Gas

Understand the urgency of drilling requests, know more about the cost implications of drilling-related problems, and understand the risks involved in a drilling contract.

Fundamentals of Seismic for Non-Geophysicists

This 5 full-day blended course will focus specifically on seismic data which is the main method used in the Oil & Gas industry.

Coiled Tubing Operations – Equipment, Applications, Well Control, Safety & Emerging Technologies

The aim of this course is to enable the participants to gain key knowledge that they will require to actively and efficiently participate in the planning, design, and/or execution of a Coiled Tubing intervention.

Managed Pressure Drilling (MPD) 

Managed Pressure Drilling (MPD) offers opportunities to improve safety and efficiency in drilling, and it is increasingly recognised by operators and regulators.

1) Finance for Non-Finance Professionals in Oil & Gas 2) Petroleum Fiscal Regimes & Applied Finance for Non-Finance Oil & Gas Professionals

This separately bookable 3 full-day course is not designed to skill Oil & Gas engineers to be accountants, but to give the participants the confidence and ability to communicate with accountants and finance managers and to improve their own financial decision making.

Applied Sequence Stratigraphy

This course aims to help geologists, geophysicists, stratigraphers and reservoir engineers gain a thorough understanding of the concepts and practical applications of sequence stratigraphy through integration of seismic sequence stratigraphy with well log sequence stratigraphy and the application of biostratigraphy to sequence stratigraphy.

Petroleum Engineering for Non-Petroleum Engineering Technical Professionals

As Petroleum Engineering (PE) activities continue to increase, professionals like you must grasp the language and technology of PE operations in order to maximise expenditures throughout the producing life of a well.

HPHT Planning and Well Control 

In our pursuit to discover oil & gas in deeper horizons, wells are often drilled in a HPHT environment. To be considered a HPHT well, the downhole conditions will have pressures in excess of 10,000 psi (69 MPa) and 300° F (150° C).

Subsea Control Systems & Umbilicals

This course will provide detailed learning to the various aspects of the design, analysis and operation of subsea control systems for a variety of field development options to allow effective management of subsea facilities either from offshore structures or from shore bases.

Competency Management & Assurance in the Energy Industry

The 3 full-day course focuses on Competence Management Systems (CMS) which are typically in use within the Energy Industry, their structure and process development requirements.

Introduction to Data Analytics & Visualization

The aim of this 2 full-day course is to enable participants to understand the process behind Data Analytics or Data Science, equip them to find opportunities from their data to make better business decisions as well as apply the insights obtained from the data to identify potential gaps and develop improvements needed in the business.