June 2023

Wind Power Generation: Advantages, Design, Site Selection, Equipment Selection, Operation and Maintenance, On-Shore and Off-Shore Wind Farms, Economics, Rate of Return, and Cost of Electricity from Wind Power Plants – Virtual Instructor Led Training (VILT)

This 5 half-day course covers all aspects of wind power plants including evaluation of a potential location for a wind power plant using wind data and using statistical distributions to approximate available wind energy at a wind power plant site.

Read More

Course code:

PWR1181

Date

19 - 23 Jun 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 3,499

Fee:

SGD 3,699

Course code:

PWR1181

Date

19 - 23 Jun 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,554

Fee:

USD 2,700

Ultra Supercritical Steam Power Plants: Design, Selection, Applications, Operation, Maintenance, Performance Monitoring, Power Augmentation, Emission Control Methods, Carbon Capture Technology, Economics, Profit Optimization, Revenue and Life Cycle Cost Analysis – Classroom Training

This 3 full-day course will cover all aspects of ultra supercritical steam power plants and advanced ultra supercritical power plants.

Read More

Course code:

PWR1182

Date

26 - 28 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 3,299

Fee:

SGD 3,499

Course code:

PWR1182

Date

26 - 28 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 2,399

Fee:

USD 2,599

Switchgears and Transformers: Selection, Maintenance & Testing - Classroom Training

Using the latest technology, this 4-day course addresses the above objectives by covering the successful operation of motors, variable-speed drives, transformers, generators, rectifiers, inverters, uninterruptible power systems, circuit breakers, and fuses.

Read More

Course code:

PWR1167

Date

06 - 09 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,099

Fee:

SGD 4,299

Course code:

PWR1167

Date

06 - 09 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 2,850

Fee:

USD 3,050

Smart Metering & Power Quality Analytics - Classroom Training

This 4-day course will equip you with the innovations that are shaping the power generation and distribution systems and will cover topics ranging from Smart Metering Architecture, Cybersecurity, Smart Grid Systems and Power Line Communications.

Read More

Course code:

PWR1168

Date

20 - 23 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 3,999

Fee:

SGD 4,299

Course code:

PWR1168

Date

20 - 23 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 2,900

Fee:

USD 3,120

Engineering, Procurement & Construction Contracts (EPC) - Classroom Training

This 3-day training is specifically designed for professionals who are interested in enhancing their knowledge on EPC contracts.

Read More

Course code:

PD731

Date

12 - 14 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 3,099

Fee:

SGD 3,299

Course code:

PD731

Date

12 - 14 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 2,300

Fee:

USD 2,500

Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals – Classroom Training

The Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals course focuses on the unique needs of technical professionals who write for both technical and non-technical readers.

Read More

Course code:

PE1669

Date

26 - 28 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 2,499

Fee:

SGD 2,699

Course code:

PE1669

Date

26 - 28 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 1,799

Fee:

USD 1,999

High-Pressure Multistage Pumps Design, Selection, Operation and Condition Monitoring - Classroom Training

This advanced 5-day training course on high-pressure multistage pumps will help you comprehend their design, operation and maintenance.

Read More

Course code:

PWR1126

Date

12 - 16 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 3,299

Fee:

SGD 3,599

Course code:

PWR1126

Date

12 - 16 Jun 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 2,325

Fee:

USD 2,540

Root Cause Analysis for Boilers and Steam Cycle Failures - Virtual Instructor Led Training (VILT)

Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems

Read More

Course code:

PWR1130

Date

19 - 23 Jun 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 3,499

Fee:

SGD 3,699

Course code:

PWR1130

Date

19 - 23 Jun 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,554

Fee:

USD 2,700

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers - Virtual Instructor Led Training (VILT)

This is an advanced chemistry training course for power plant chemists and boiler engineers wishing to expand their knowledge and skills, and to become more effective in their day to day roles dealing with thermal power plant chemistry

Read More

Course code:

PWR1175

Date

26 - 30 Jun 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 3,499

Fee:

SGD 3,699

Course code:

PWR1175

Date

26 - 30 Jun 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,554

Fee:

USD 2,700

July 2023

Gas Turbines, Co-Generation and Combined Cycle Power Plants - Classroom Training

This 5 full-day course will cover all aspects of gas turbines, co-generation and combined cycle power plants.

Read More

Course code:

PWR1177

Date

10 - 14 Jul 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1177

Date

10 - 14 Jul 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Commissioning Service Operation Vessels (CSOV) and Wind Farm Installation Vessels (WIV) Charterparty Management – Classroom Training

This 3 full-day course is developed to prepare commercial and operation personnel of both Owners and Charterers, to ensure contentions free and smooth chartering management for profitable operations.

Read More

Course code:

PD711

Date

05 - 07 Jul 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 3,499

Fee:

SGD 3,699

Course code:

PD711

Date

05 - 07 Jul 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 2,599

Fee:

USD 2,699

Thermal Power Plant Performance Testing – Classroom Training

This 5 full-day course provides a detailed description of all performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, deaerators, and feedwater heaters.

Read More

Course code:

PWR1176

Date

03 - 07 Jul 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1176

Date

03 - 07 Jul 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Piping Stress Engineering – Virtual Instructor Led Training (VILT)

The 5 half-day Piping Stress Engineering Virtual Instructor Led Training (VILT) course will systematically expose participants to the theory and practice of piping stress engineering, with special reference to ASME B 31.1 and ASME B 31.3 Standards.

Read More

Course code:

PE1739

Date

31 Jul - 04 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 3,299

Fee:

SGD 3,499

Course code:

PE1739

Date

31 Jul - 04 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,499

Fee:

USD 2,699

Advanced Level – Assessing and Monitoring the Condition of Power Transformers by Oil Analysis – Virtual Instructor Led Training (VILT)

The objective of this 4-half-day Virtual Instructor Led Training (VILT) course is to equip participants with the required knowledge so that they can define and implement an effective oil analysis programme, monitor the condition of transformers and understand oil analysis reports as part of their maintenance strategy.

Read More

Course code:

PWR1144

Date

31 Jul - 03 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 2,299

Fee:

SGD 2,499

Course code:

PWR1144

Date

31 Jul - 03 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 1,799

Fee:

USD 1,999

Operations, Maintenance and Testing of Power Transformer & Electric Motors - Virtual Instructor Led Training (VILT)

The objective of this training course is to provide an understanding of power transformers and electric motors, their materials, components, and how they operate.

Read More

Course code:

PWR1143

Date

31 Jul - 03 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 3,000

Fee:

SGD 3,200

Course code:

PWR1143

Date

31 Jul - 03 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,190

Fee:

USD 2,336

Introduction to Power Systems - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control.

Read More

Course code:

PWR1178

Date

24 - 28 Jul 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 3,499

Fee:

SGD 3,699

Course code:

PWR1178

Date

24 - 28 Jul 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,554

Fee:

USD 2,700

August 2023

Root Cause Analysis for Boilers and Steam Cycle Failures – Classroom Training

This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology.

Read More

Course code:

PWR1188

Date

21 - 25 Aug 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1188

Date

21 - 25 Aug 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Heat Rate Optimization of Coal Power Plants – Classroom Training

This 5 full-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants.

Read More

Course code:

PWR1187

Date

14 - 18 Aug 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1187

Date

14 - 18 Aug 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment – Classroom Training

This 5 full-day course provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment

Read More

Course code:

PWR1186

Date

07 - 11 Aug 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1186

Date

07 - 11 Aug 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Cross Border Electricity Trading in Asia - Renewable Energy, Digital Technologies and New Operational Flexibility Solutions – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course highlights the impact of the introduction of renewable energy, digital technologies and new operational flexibility solutions in the electricity trading market. These advancements facilitate unique opportunities and challenges for cross border trading of electricity.

Read More

Course code:

PWR1142

Date

14 - 16 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 1,899

Fee:

SGD 2,099

Course code:

PWR1142

Date

14 - 16 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 1,499

Fee:

USD 1,699

Geothermal Project Finance Analysis and Modelling - Virtual Instructor Led Training (VILT)

This 4 half-day Virtual Instructor Led Training (VILT) course will address a variety of contract and loan structuring issues associated with geothermal energy projects as well as comparison with solar, wind and battery storage.

Read More

Course code:

PWR1139

Date

01 - 04 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 2,250

Fee:

SGD 2,450

Course code:

PWR1139

Date

01 - 04 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 1,699

Fee:

USD 1,899

Preventive and Predictive Maintenance - Virtual Instructor Led Training (VILT)

This 8 half-day Virtual Instructor Led Training (VILT) course has been derived from the Plant Performance Improvement Road Map developed by practitioners that guarantee the reliability of your operations.

Read More

Course code:

PD718

Date

14 - 23 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 3,899

Fee:

SGD 4,099

Course code:

PD718

Date

14 - 23 Aug 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,899

Fee:

USD 3,099

September 2023

Industrial Instrumentation and Modern Control Systems – Classroom Training

his 3 full-day course provide a comprehensive understanding of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, HART protocol, control valves, actuators, and smart technology.

Read More

Course code:

PWR1191

Date

25 - 27 Sep 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 3,299

Fee:

SGD 3,499

Course code:

PWR1191

Date

25 - 27 Sep 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 2,399

Fee:

USD 2,599

Maintenance of Steam and Gas Turbines: Inspection, Diagnostic Testing, Troubleshooting, Maintenance, Overhaul and Refurbishment – Classroom Training

This 5 full-day course provides a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all steam and gas turbines

Read More

Course code:

PWR1190

Date

18 - 22 Sep 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1190

Date

18 - 22 Sep 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Commissioning of Electrical Equipment – Classroom Training

This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment

Read More

Course code:

PWR1189

Date

11 - 15 Sep 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1189

Date

11 - 15 Sep 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals – Classroom Training

The Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals course focuses on the unique needs of technical professionals who write for both technical and non-technical readers.

Read More

Course code:

PE1690

Date

25 - 27 Sep 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 2,499

Fee:

SGD 2,699

Course code:

PE1690

Date

25 - 27 Sep 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 1,799

Fee:

USD 1,999

Assessing and Managing Cyber Security Risks for Essential Services Operators – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course will help participants grasp the idea of real-world risk management and how this relates to the cyber world. It will cover topics surrounding identifying cyber risks and vulnerabilities, guidance on applying administrative actions, and comprehensive solutions to ensure your organization is adequately secure and protected.

Read More

Course code:

PWR1150

Date

25 - 27 Sep 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 2,999

Fee:

SGD 3,199

Course code:

PWR1150

Date

25 - 27 Sep 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,299

Fee:

USD 2,499

Green Hydrogen Production from Offshore Wind – Virtual Instructor Led Training (VILT)

This 2 half-day Virtual Instructor Lead Training (VILT) course will examine the technological options for on-site production of hydrogen by electrolysis (onshore or offshore directly at the platform) as well as the transport of hydrogen (pipeline or ship). This VILT course will also explore the economic considerations and the outlook on future market opportunities.

Read More

Course code:

PWR1149

Date

25 - 26 Sep 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 2,899

Fee:

SGD 3,099

Course code:

PWR1149

Date

25 - 26 Sep 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,099

Fee:

USD 2,299

Assessing the Water-Steam Chemistry Cycle in Thermal Power Plants – Virtual Instructor Led Training (VILT)

This 2-half-day Virtual Instructor Led Training (VILT) course will discuss the chemical aspects of the water-steam cycle in a power plant. The VILT course will examine the different types of chemicals used in boilers, potential issues in a water-steam cycle as well as aspects of monitoring and specifications regarding target values and alarm levels. Participants will also be equipped on what to do or key action steps to take in the event of chemistry-related incidents.

Read More

Course code:

PWR1147

Date

25 - 26 Sep 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 1,499

Fee:

SGD 1,699

Course code:

PWR1147

Date

25 - 26 Sep 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 1,199

Fee:

USD 1,399

October 2023

Steam Turbine Technology – Classroom Training

This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Read More

Course code:

PWR1194

Date

16 - 20 Oct 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1194

Date

16 - 20 Oct 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Commissioning and Start-Up Activities of Coal Power Plants – Classroom Training

This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants.

Read More

Course code:

PWR1193

Date

09 - 13 Oct 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1193

Date

09 - 13 Oct 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Design Of Circulating Fluidized Bed Boilers – Classroom Training

This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail.

Read More

Course code:

PWR1192

Date

02 - 06 Oct 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1192

Date

02 - 06 Oct 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

The Principles of Asset Management – IAM Certificate in Asset Management – Virtual Instructor Led Certificate Training Course

The Certificate in Asset Management Virtual Instructor Led Training (VILT) course will provide those involved in Asset Management with a full explanation of the key processes to manage assets across their lifecycle. This recognised VILT course has been designed to equip participants with practical skills to take back to work. This VILT course enables participants to ensure their organisation’s assets are realising their full value in support of the organisation’s objectives. Pending accredita...

Read More

Course code:

PD719

Date

09 - 13 Oct 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 2,899

Fee:

SGD 3,099

Course code:

PD719

Date

09 - 13 Oct 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,199

Fee:

USD 2,399

Course code:

PD719

Date

09 - 13 Oct 2023

Location

Virtual Instructor Led Training (VILT)

Fee:

SGD 450 (IAM Exam Fee - Optional)

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

Read More

Course code:

PE1707

Date

23 - 27 Oct 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 3,799

Fee:

USD 3,999

The Impact of Electric Vehicles (EVs) on the Grid - Virtual Instructor Led Training (VILT)

Electrification of the transportation sector will impact the power system in several ways.

Read More

Course code:

PWR1151

Date

25 - 27 Oct 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 3,299

Fee:

SGD 3,499

Course code:

PWR1151

Date

25 - 27 Oct 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,408

Fee:

USD 2,554

Maintenance and Reliability Best Practices – Aligned with SMRP* Best Practices and the CMRP Certification – Virtual Instructor Led Training (VILT)

This Maintenance and Reliability Best Practices VILT will provide Maintenance and Reliability personnel with a full explanation of the Award-winning Model of Excellence for maintenance. This VILT is aligned with SMRP best practices and the CMRP exam.

Read More

Course code:

PD722

Date

23 Oct - 01 Nov 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 4,399

Fee:

SGD 4,599

Course code:

PD722

Date

23 Oct - 01 Nov 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Maintenance Planning, Scheduling & Control - Virtual Instructor Led Training (VILT)

With an organisation’s maintenance process only as good as its weakest link, this Virtual Instructor Led Training (VILT) will guide participants through all the key steps of a maintenance process and its supply chain. Participants will understand what is considered a good standard for each step in the maintenance process, how to identify the weakest links and subsequently how they can accelerate their performance improvement.

Read More

Course code:

PD720

Date

16 - 20 Oct 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 2,799

Fee:

SGD 2,999

Course code:

PD720

Date

16 - 20 Oct 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 2,199

Fee:

USD 2,399

November 2023

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers – Classroom Training

This 5 full-day course will provide ample opportunity for robust technical discussion and expand on advanced concepts in thermal power plant cycle chemistry. It focuses only on the steam/water aspects of the thermal power cycle.

Read More

Course code:

PWR1197

Date

27 Nov - 01 Dec 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1197

Date

27 Nov - 01 Dec 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals – Classroom Training

The Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals course focuses on the unique needs of technical professionals who write for both technical and non-technical readers.

Read More

Course code:

PE1705

Date

20 - 22 Nov 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 2,499

Fee:

SGD 2,699

Course code:

PE1705

Date

20 - 22 Nov 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 1,799

Fee:

USD 1,999

Transformer Maintenance – Classroom Training

This 3 full-day course will provide a comprehensive understanding of the various types of transformer maintenance including breakdown maintenance, preventive maintenance, total productive maintenance, condition-based maintenance, proactive maintenance, and reliability-centered maintenance.

Read More

Course code:

PWR1195

Date

15 - 17 Nov 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 3,299

Fee:

SGD 3,499

Course code:

PWR1195

Date

15 - 17 Nov 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 2,399

Fee:

USD 2,599

Electrical Generators, Excitation Systems and Governing Systems – Classroom Training

This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.

Read More

Course code:

PWR1196

Date

20 - 24 Nov 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1196

Date

20 - 24 Nov 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Demand Side Management - Integration of New Technologies, Regulatory Changes & Renewable Energy Resources - Virtual Instructor Led Training (VILT)

This Virtual Instructor Led Training (VILT) course presents advanced methodologies that implement demand response and energy conservation programs in light of the integration of new technologies, regulatory changes and the accelerated penetration of renewable energy resources.

Read More

Course code:

PWR1153

Date

27 Nov - 01 Dec 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

SGD 2,499

Fee:

SGD 2,699

Course code:

PWR1153

Date

27 Nov - 01 Dec 2023

Location

Virtual Instructor Led Training (VILT)

Early Bird Fee:

USD 1,899

Fee:

USD 2,099

December 2023

Combustion Engineering for Coal Fired Power Plants – Classroom Training

This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans.

Read More

Course code:

PWR1198

Date

11 - 15 Dec 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4,599

Fee:

SGD 4,799

Course code:

PWR1198

Date

11 - 15 Dec 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Introduction to Power Systems – Classroom Training

This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control.

Read More

Course code:

PWR1185

Date

04 - 08 Dec 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

SGD 4, 599

Fee:

SGD 4,799

Course code:

PWR1185

Date

04 - 08 Dec 2023

Location

Kuala Lumpur, Malaysia

Early Bird Fee:

USD 3,299

Fee:

USD 3,499

Courses List

Decarbonization – Policy and Readiness – Classroom Training

This course will assist energy industry professionals in the planning and operation of a power system with increasing penetration of renewable energy resources, storage and electrical vehicles to support decarbonization targets.

Read More

Tripod Beta Practitioner - Silver Level - Classroom Training

This 2-day workshop follows on from the Tripod Beta bronze level course, it gives the rules and guidelines relating to how a Tripod Beta investigation and analysis is performed. This silver level workshop provides the opportunity to apply this knowledge to one of your own incidents which helps to place the theory into the context of your own workplace.

Read More

Wind Power Generation: Advantages, Design, Site Selection, Equipment Selection, Operation and Maintenance, On-Shore and Off-Shore Wind Farms, Economics, Rate of Return, and Cost of Electricity from Wind Power Plants – Classroom Training

This 5 full-day course covers all aspects of wind power plants including evaluation of a potential location for a wind power plant using wind data and using statistical distributions to approximate available wind energy at a wind power plant site.

Read More

Electrical Engineering for Non-Electrical Engineers – Classroom Training

This 5 full-day course is for individuals who would like to gain a thorough understanding of all the principles of electrical engineering in a simple and easy to grasp format.

Read More

Maintenance of Rotating Equipment: Diagnostic Testing, Troubleshooting, Maintenance, and Refurbishment – Classroom Training

This 5 full-day course will provide a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all rotating equipment including centrifugal pumps, centrifugal and axial compressors, steam and gas turbines.

Read More

Performance Analysis for Diesel Engine Power Plant – Classroom Training

This 5 full-day course will provide in-depth coverage of the selection, layout, operation, inspection, diagnostic testing, troubleshooting, maintenance, refurbishment, performance monitoring, power augmentation, and economics of all types of diesel engine power plants.

Read More

Transmission Lines: Design, Analysis and Applications - Classroom Training

The objective of this 5-day training course is to deal appropriately with control systems, design characteristics and electric & magnetic fields.

Read More

Power Quality & Harmonics in Power Systems - Classroom Training

This training will focus on the effect the customer loads have on the supply grid, and ensure that the customer load network connection does not negatively impact the grid network.

Read More

Relay Protection in Power Systems - Classroom Training

This 2-day course will immerse you with a solid understanding on the importance of relay protection in determining high voltage network expansion limitations, day to day operation and equipment maintenance activities.

Read More

Combustion Engineering for Coal Fired Power Plants – Classroom Training

This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans.

Read More

Electrical Substation: Design, Construction & Commissioning - Classroom Training

This 5-day course in substation design fundamentals will guide you through a step-by-step study of the civil and electrical substation design and construction process.

Read More

Volt-VAR Optimization – Classroom Training

The main focus of this 3 full-day course is to provide managers, engineers and technicians with the fundamental knowledge to research the current and future trend of VVO technologies on the market, assess the network readiness and plan for VVO trial and deployment, Implement SCADA, communication infrastructures, VVO equipment and sensors and operate and maintain VVO schemes that is fit for purpose.

Read More

Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals – Classroom Training

The Technical Report Writing and Presentation Skills for Oil & Gas Engineers and Technical Professionals course focuses on the unique needs of technical professionals who write for both technical and non-technical readers.

Read More

Transformer Maintenance – Classroom Training

This 3 full-day course will provide a comprehensive understanding of the various types of transformer maintenance including breakdown maintenance, preventive maintenance, total productive maintenance, condition-based maintenance, proactive maintenance, and reliability-centered maintenance.

Read More

Electrical Generators, Excitation Systems and Governing Systems – Classroom Training

This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.

Read More

Heat Rate Optimization of Coal Power Plants – Classroom Training

This 5 full-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants.

Read More

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment – Classroom Training

This 5 full-day course provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment

Read More

Boiler Tuning – Classroom Training

This 5 full-day course provides detailed description of all the tuning methods for all the control systems used in pulverized coal boilers, circulating fluidized bed (CFB) boilers, cyclone boilers and stocker boilers.

Read More

Steam Turbine Design – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course will cover all aspects of steam turbine design including blade design and material, operating principles, sizing and selection procedures, inspection, diagnostics, maintenance and overhaul of steam turbines, steam turbine start-up and shutdown procedures, surveillance and health monitoring of steam turbines, governing systems as well as all the components, instrumentation and control systems of steam turbines, and address root caus...

Read More

Maintenance Planning, Scheduling & Control – Classroom Training

This course is based on an integrated maintenance model that has been used by leading companies and consultants with success and recognised as best practice.

Read More

Thermal Power Plant Pumps: Design, Selection, O & M and Condition Monitoring - Classroom Training

This 5-day training course will focus on main circuit pumps for Thermal and Combined Cycle Power plants which includes design, selection, operation and maintenance and condition monitoring.

Read More

Electricity Trading - Classroom Training

By participating in this course, participants will gain the required knowledge, insights and access to best practices to successfully operate in the changing electricity market environment of their country.

Read More

ESG Reporting Frameworks & Industry Best Practices - Classroom Training

This 2-day training course provides an overview of ESG and analyses the disclosure requirements of different sustainability reporting frameworks.

Read More

Power System Analysis & ARC Flash Safety for Utility Application - Classroom Training

This 4-day training course aims to make electrical systems safer with a balance of theory and practice that will provide a firm foundation of knowledge for your daily operations.

Read More

Carbon Pricing, Tax & Trading Policies: Energy Transition & Global Carbon Policies – Classroom Training

The low-carbon energy transition initiatives focus on decarbonizing the energy industry and their respective economies as a whole. To achieve this, the role and potential for carbon pricing and carbon markets will be crucial. During this 3 full-day training course, participants will learn about the key policy issues and the main trends in emissions markets such as future carbon pricing and fiscal policy expectations.

Read More

Maintenance and Reliability Best Practices – Aligned with SMRP* Best Practices and the CMRP Certification – Classroom Training

This 4 full-day Maintenance and Reliability Masterclass course will provide Maintenance and Reliability personnel with a full explanation of the Award-winning Model of Excellence for maintenance.

Read More

Essential Elements of International Contracts Laws and Contracts Lifecycle Management – Virtual Instructor Led Training (VILT)

Contracts are essential features of the business world and daily commerce. While a good business contract helps to bring in profits, an even better one safeguards those hard-earned profits at the same time. What you know about contracts can help to grow your business. Conversely, what you do not know can cripple your business.

Read More

Clean Hydrogen: The Investment Case and Project Development Best Practices - Classroom Training

This 3-day training course will explain the business-focused perspective on clean hydrogen investment opportunities and project development considerations.

Read More

Low-carbon Ammonia as a Hydrogen Derivative & Tradable Energy Vector – Virtual Instructor Led Training (VILT)

This 2 half-day Virtual Instructor Led Training (VILT) course will provide tangible examples of technologies for green ammonia generation from electrolysis and renewable power pathways. Shipping infrastructure and terminals will also be covered, as will key demand drivers such as ammonia-fired power generation and the use of ammonia as a maritime fuel.

Read More

Advanced Load Forecasting & Methodology – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course will look at the latest statistical and mathematical forecasting frameworks used by industry practitioners to tackle and manage the issue of load forecasting that cuts across short and long time scales.

Read More

Assessing and Managing Cyber Security Risks for Essential Services Operators – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course will help participants grasp the idea of real-world risk management and how this relates to the cyber world. It will cover topics surrounding identifying cyber risks and vulnerabilities, guidance on applying administrative actions, and comprehensive solutions to ensure your organization is adequately secure and protected.

Read More

Engineering, Procurement & Construction Contracts (EPC) - Virtual Instructor Led Training (VILT)

Our 5 half-day Virtual Instructor Led Training (VILT) course focuses on key concepts in EPC contract management and how to overcome challenges throughout every stage of the contractual process and negotiations.

Read More

Green Hydrogen Production from Offshore Wind – Virtual Instructor Led Training (VILT)

This 2 half-day Virtual Instructor Lead Training (VILT) course will examine the technological options for on-site production of hydrogen by electrolysis (onshore or offshore directly at the platform) as well as the transport of hydrogen (pipeline or ship). This VILT course will also explore the economic considerations and the outlook on future market opportunities.

Read More

LNG Value Chain & Economics – Optimise Your LNG Projects and Supply Strategies – Virtual Instructor Led Training (VILT)

This intermediate level 5 half-day Virtual Instructor Led Training (VILT) course starts with a concise introduction to the LNG business. Thereafter, the elements of the LNG value chain are described, and their individual economics analysed.

Read More

Relay Protection in Power Systems - Virtual Instructor Led Training (VILT)

This 4 half-day Virtual Instructor Led Training (VILT) course will provide participants with a comprehensive and technical overview on relay protection and its applications in practice.

Read More

Hydrogen for Firm Power Generation – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course will provide participants with a comprehensive and up-to-date introduction to the prospects for hydrogen in future power mixes.

Read More

Design, Planning and Executing in Heavy Lifting – Virtual Instructor Led Training (VILT)

Through the use of videos, animations, discussions and presentations, this 4 half-day advanced Virtual Instructor Led Training (VILT) course has been designed to train personnel with more than five years of experience and organisations involved with heavy lifting and transports and equip them with the relevant knowledge to prevent costly accidents and improve safety performance.

Read More

Cross Border Electricity Trading in Asia - Renewable Energy, Digital Technologies and New Operational Flexibility Solutions – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course highlights the impact of the introduction of renewable energy, digital technologies and new operational flexibility solutions in the electricity trading market. These advancements facilitate unique opportunities and challenges for cross border trading of electricity.

Read More

Advanced Level – Assessing and Monitoring the Condition of Power Transformers by Oil Analysis – Virtual Instructor Led Training (VILT)

The objective of this 4-half-day Virtual Instructor Led Training (VILT) course is to equip participants with the required knowledge so that they can define and implement an effective oil analysis programme, monitor the condition of transformers and understand oil analysis reports as part of their maintenance strategy.

Read More

Maintenance Management, Interpretation of Schematic Diagram and Troubleshooting on Electrical Equipment – Virtual Instructor Led Training (VILT)

This 3 half-day VILT course aims to provide an understanding of the fundamentals of operation and maintenance of electrical system and how to read and interpret the electrical schematic diagram, electrical safety at switchgear, electric motor, transformer as well as earthing system at facilities.

Read More

Hydrogen Storage & Transportation – Virtual Instructor Led Training (VILT)

This VILT course will provide participants with a thorough understanding of how hydrogen fuel can be stored, transported and distributed from production to end-use – and why this is of central importance in determining how the hydrogen landscape will develop.

Read More

Introduction to Offshore Wind: Technology, Projects & Economics - Virtual Instructor Led Training (VILT)

This VILT course is intended to help participants understand the offshore wind technologies, trends, processes and financial return and risk considerations involved in project development.

Read More

Advanced Project Management in Primavera P6 – Virtual Instructor Led Training (VILT)

This Primavera P6 based training course will equip participants with the understanding to practise advanced project management functionality so that participants can make improved decisions when managing real projects. It will explain how to manage projects and resources efficiently utilising advanced techniques to ensure maximum return on investment. It will discuss Project Management topics including Feasibility, FEED and Execution planning, earned value analysis and advanced scheduling as ...

Read More

Assessing the Water-Steam Chemistry Cycle in Thermal Power Plants – Virtual Instructor Led Training (VILT)

This 2-half-day Virtual Instructor Led Training (VILT) course will discuss the chemical aspects of the water-steam cycle in a power plant. The VILT course will examine the different types of chemicals used in boilers, potential issues in a water-steam cycle as well as aspects of monitoring and specifications regarding target values and alarm levels. Participants will also be equipped on what to do or key action steps to take in the event of chemistry-related incidents.

Read More

Carbon Pricing, Tax & Trading Policies: Energy Transition & Global Carbon Policies – Virtual Instructor Led Training (VILT)

During this 3 half-day Virtual Instructor Led Training (VILT) course, participants will learn about the key policy issues and the main trends in emissions markets such as future carbon pricing and fiscal policy expectations.

Read More

Control Valves and Actuators - Virtual Instructor Led Training (VILT)

This 3-half day virtual instructor led training course (VILT) will provide a comprehensive understanding of the various types of control valves and actuators, including linear and rotary control valves; pneumatic, piston, electric, and electrohydraulic actuators.

Read More

Utility Commercial, Industrial & Community Scale Energy Storage (U/C&I/CES) Systems 3.0 – Virtual Instructor Led Training (VILT)

This course will allow participants to gain more practical and theoretical knowledge about Utility Commercial Industrial and & Community Energy Storage Systems (U/C&I/CESS) with a focus on types of System Design, Specification, Project Implementation and the Future of U/C&I/CES systems.

Read More

Utility Commercial, Industrial & Community Scale Energy Storage (U/C&I/CES) Systems 2.0 – Virtual Instructor Led Training (VILT)

This VILT will allow participants to gain more practical and theoretical knowledge about Utility Commercial, Industrial & Community Energy Storage Systems (U/C&I/CESS) with a focus on Planning, Project Development and Value Stacking with current case studies of the various system types.

Read More

Motors & Variable Frequency Drives (VFD) - Virtual Instructor Led Training (VILT)

This VILT will provide a comprehensive understanding of the various types of motors and variable frequency drives (VFD’s).

Read More

Fundamentals of Piping Engineering – Virtual Instructor Led Training (VILT)

The Fundamentals of Piping Engineering Virtual Instructor Led Training (VILT) course will systematically introduce participants to the basics of Piping Engineering, with piping engineering standards ASME B 31.1 and ASME B 31.3 as its backdrop.

Read More

Steam Turbine Technology - Virtual Instructor Led Training (VILT)

This 5 half-day online course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Read More

The Principles of Asset Management – IAM Certificate in Asset Management – Virtual Instructor Led Certificate Training Course

The Certificate in Asset Management Virtual Instructor Led Training (VILT) course will provide those involved in Asset Management with a full explanation of the key processes to manage assets across their lifecycle. This recognised VILT course has been designed to equip participants with practical skills to take back to work. This VILT course enables participants to ensure their organisation’s assets are realising their full value in support of the organisation’s objectives. Pending accredita...

Read More

Demand Side Management - Integration of New Technologies, Regulatory Changes & Renewable Energy Resources - Virtual Instructor Led Training (VILT)

This Virtual Instructor Led Training (VILT) course presents advanced methodologies that implement demand response and energy conservation programs in light of the integration of new technologies, regulatory changes and the accelerated penetration of renewable energy resources.

Read More

Corporate Power Purchase Agreements - Virtual Instructor Led Training (VILT)

The global power markets are rapidly evolving and transitioning towards ever-increasing quantities of clean energy - power purchase agreements allow both IPP power producers and buyers to obtain long-term security to sell and buy renewable energy.

Read More

Operations, Maintenance and Testing of Power Transformer & Electric Motors - Virtual Instructor Led Training (VILT)

The objective of this training course is to provide an understanding of power transformers and electric motors, their materials, components, and how they operate.

Read More

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

Read More

Economic & Financial Analysis of Renewable Energy, Storage and Hydrogen – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course will discuss the analysis of different renewable technologies including LCOE, financing, resource analysis and pricing.

Read More

The Fundamentals of Thermal Power Plant - Virtual Instructor Led Training (VILT)

This course is for individuals who would like to gain a basic understanding of all types of power generating plants.

Read More

Heat Rate Optimization of Coal Power Plants - Virtual Instructor Led Training (VILT)

This 5 half-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants.

Read More

Root Cause Analysis for Boilers and Steam Cycle Failures - Virtual Instructor Led Training (VILT)

Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems

Read More

Commissioning of Combined Cycle Power Plants - Virtual Instructor Led Training (VILT)

This course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants.

Read More

Commissioning and Start-up Activities of Coal Power Plants - Virtual Instructor Led Training (VILT)

This course provides a comprehensive understanding of all the commissioning and start-up activities of coal power plants.

Read More

Combustion Engineering for Coal Fired Power Plants - Virtual Instructor Led Training (VILT)

This course provides a detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers, including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans.

Read More

Introduction to Power Systems - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control.

Read More

Industrial Instrumentation and Modern Control Systems - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of modern control systems, digital control, Distributed Control Systems (DCSs), Supervisory Control And Data Acquisition (SCADA) systems, industrial instrumentation, control valves, actuators and smart technology.

Read More

Electrical Generators, Excitation Systems and Governing Systems - Virtual Instructor Led Training (VILT)

In overall, this course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVR’s), governing systems, and protective systems.

Read More

Rotating Equipment - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of the various types of rotating equipment, including centrifugal pumps, centrifugal and axial compressors, and motors.

Read More

Utility and Community Scale Energy Storage Systems - Virtual Instructor Led Training (VILT)

This course will provide a detailed analysis of Utility and Community Scale Energy Storage (U&CES) Systems.

Read More

Thermal Power Plant Performance Testing - Virtual Instructor Led Training (VILT)

This course provides detailed description of all the performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, deaerators, and feedwater heaters.

Read More

Mini Hydro Power Plant - Virtual Instructor Led Training (VILT)

This 5-half day Virtual Instructor Led Training (VILT) course will provide a comprehensive understanding of all the best operation practices for a mini (smaller than 25 MW) hydro-electric power plant.

Read More

Green Hydrogen Projects and Contracts - Virtual Instructor Led Training (VILT)

The hydrogen economy is taking shape across the globe in a variety of forms and possible project setups.

Read More

Commissioning of Electrical Equipment - Virtual Instructor Led Training (VILT)

This course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment including transformers, switchgear, induction and synchronous motors, generators and auxiliaries.

Read More

Uninterruptible Power Systems (UPS) - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of the various types of uninterruptible power systems (UPS's), inverters, rectifiers, variable frequency drives (VFD), and industrial batteries.

Read More

Ultra Supercritical Steam Power Plants - Virtual Instructor Led Training (VILT)

This course will cover all aspects of ultra supercritical steam power plants and advanced ultra supercritical power plants.

Read More

Transformer Maintenance - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of the various types of transformer maintenance including breakdown maintenance, preventive maintenance, total productive maintenance, condition-based maintenance, proactive maintenance, and reliability-centered maintenance.

Read More

Electricity Pricing and Marginal Cost Analysis - Virtual Instructor Led Training (VILT)

Forward pricing and valuation in electricity generation is a 4 half day intensive, technical hands-on course in which attendees receive comprehensive instruction on the theory and practice of making price forecasts and assessing risk in the electricity generating industry.

Read More

Boiler Tuning - Virtual Instructor Led Training (VILT)

This 5-day course provides detailed description of all the tuning methods for all the control systems used in pulverized coal boilers, circulating fluidized bed (CFB) boilers, cyclone boilers and stocker boilers.

Read More

Wind Power Generation: Design, Technology, Operations, Maintenance & Economics - Virtual Instructor Led Training (VILT)

This course covers all aspects of wind power plants including evaluation of a potential location for a wind power plant using wind data and using statistical distributions to approximate available wind energy at a wind power plant site.

Read More

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers - Virtual Instructor Led Training (VILT)

This is an advanced chemistry training course for power plant chemists and boiler engineers wishing to expand their knowledge and skills, and to become more effective in their day to day roles dealing with thermal power plant chemistry

Read More

Volt-VAR Optimization - Virtual Instructor Led Training (VILT)

Voltage/VAR management or control is essential to electrical utilities' ability to deliver power within appropriate voltage limits so that consumers' equipment operates properly, and to deliver power at an optimal power factor to minimize losses.

Read More

Power Purchase Agreements - Virtual Instructor Led Training (VILT)

According to the IEA “More than 70% of the $2 trillion required each year in energy supply investment either comes from state-directed entities or receives a full or partial revenue guarantee.”

Read More

Electricity Project Finance Modelling Analysis - Virtual Instructor Led Training (VILT)

This course will provide you with the ability to understand nuances of project finance theory through creating and understanding project finance models.

Read More

Design of Circulating Fluidized Bed Boilers - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers.

Read More

Geothermal Project Finance Analysis and Modelling - Virtual Instructor Led Training (VILT)

This 4 half-day Virtual Instructor Led Training (VILT) course will address a variety of contract and loan structuring issues associated with geothermal energy projects as well as comparison with solar, wind and battery storage.

Read More

Introduction to Power Generation - Virtual Instructor Led Training (VILT)

This course will cover all aspects of steam power plants, gas turbines, co-generation, combined cycle plants, wind and solar power generating plants.

Read More

Electrical Engineering for Non-Electrical Engineers - Virtual Instructor Led Training (VILT)

This course is for individuals who would like to gain a thorough understanding of all the principles of electrical engineering in a simple and easy to grasp format.

Read More

Maintenance and Reliability Best Practices – Aligned with SMRP* Best Practices and the CMRP Certification – Virtual Instructor Led Training (VILT)

This Maintenance and Reliability Best Practices VILT will provide Maintenance and Reliability personnel with a full explanation of the Award-winning Model of Excellence for maintenance. This VILT is aligned with SMRP best practices and the CMRP exam.

Read More

Carbon Capture Economics and Business Models - Virtual Instructor Led Training (VILT)

Currently some 40 megatonnes of Co2 are captured and stored annually with dozens of new projects representing some USD 30bn investments being announced since 2017.

Read More

Preventive and Predictive Maintenance - Virtual Instructor Led Training (VILT)

This 8 half-day Virtual Instructor Led Training (VILT) course has been derived from the Plant Performance Improvement Road Map developed by practitioners that guarantee the reliability of your operations.

Read More

Maintenance Planning, Scheduling & Control - Virtual Instructor Led Training (VILT)

With an organisation’s maintenance process only as good as its weakest link, this Virtual Instructor Led Training (VILT) will guide participants through all the key steps of a maintenance process and its supply chain. Participants will understand what is considered a good standard for each step in the maintenance process, how to identify the weakest links and subsequently how they can accelerate their performance improvement.

Read More

Competency Management & Assurance in the Energy Industry - Virtual Instructor Led Training (VILT)

This VILT will focus on Competence Management Systems (CMS) which are typically in use within the Energy Industry, their structure and process development requirements.

Read More

Process Hazard Assessment using the HAZOP Technique and HAZOP Team Leader Training - Virtual Instructor Led Training (VILT) [IChemE Approved Training Course]

Process Hazard Assessment using the HAZOP Technique is an intensely participative Virtual Instructor Led Training (VILT) that will both explain the key facets of the HAZOP technique as well as provide ample opportunities for participants to practice and become familiar with the technique using generic and real-life examples. HAZOP Team Leader Training is an intensely participative Virtual Instructor Led Training (VILT) that will develop participants already familiar with the HAZOP techn...

Read More

Process Safety Management & Engineering Applications - Virtual Instructor Led Training (VILT) [IChemE Approved Training Course]

This Virtual Instructor Led Training (VILT) course covers all the main elements of IChemE’s Process Safety Competency framework: culture, knowledge and competence, engineering and design, human factors, systems and procedures, and assurance.

Read More