Electrical & Power Engineering

Webinar: Proton Exchange Membrane (PEM) Electrolyser and Balance of Plant

Principles of Nuclear Power Plant Operations and Design for Small Modular Reactors (SMR) - Leveraging Clean Energy For A Sustainable Tomorrow

In an era marked by growing energy demands and heightened concerns over climate change, nuclear power continues to play a significant role in the global energy landscape. With advancements in technology, there is a renewed focus on enhancing the efficiency, safety, and flexibility of nuclear energy generation. Nuclear power holds tremendous promise as a reliable, low-carbon energy source, but also comes with complex engineering challenges. However, Small Modular Reactors (SMRs) represent an e...

Coal Power Plant Life Cycle Management and Flexible Operations in Energy Transition - Decommissioning, Preservation, Repurposing and Recommissioning

In response to emerging trends in Net Zero 2050 compliance requirements and the current COP28 Agreement, the landscape of fossil fuel power generation is undergoing a transformative shift, prompting a redefinition of operational strategies. Furthermore, balancing compliance with stringent regulations and meeting escalating energy consumption demands has become crucial. Notably, coal-fired power plants pose significant challenges on this transformative journey, being major contributors to emis...

Solar PV Systems, Modelling and Analysis - Master the Technology of Solar PV from Cells to Systems

Solar PV systems hold significant promise for generating clean and renewable energy. However, achieving optimal performance necessitates expertise in modelling, simulation, and data analysis. In this intensive 4-day course, participants will receive comprehensive training in utilizing modelling techniques and software tools to accurately analyse PV system operations, maximize energy output, and facilitate data-driven decision-making.

Economic, Financial Analysis & Modelling of Geothermal Energy

This 3-day course will address a variety of contract and loan structuring issues associated with geothermal energy projects as well as comparison with solar, wind and battery storage.

Large Scale Hydrogen Production - Electrolyser Technologies & Electrolysis Interfaces

Hydrogen is considered to a key component in the transition towards low to zero emission in the energy sector. Hydrogen is a versatile energy carrier and a widely used resource in the chemical industry. In order to decarbonize existing hydrogen use, clean hydrogen must be used. Hydrogen, as a chemical molecule, is perfectly suitable to store large amounts of energy, even for longer times and to transport energy between countries and even to enable the use of renewable energies across industry...

Gas Turbines, Co-Generation and Combined Cycle Power Plants

This 5 full-day course will cover all aspects of gas turbines, co-generation and combined cycle power plants.

Switchgears and Transformers: Selection, Maintenance & Testing

Using the latest technology, this 4-day course addresses the above objectives by covering the successful operation of motors, variable-speed drives, transformers, generators, rectifiers, inverters, uninterruptible power systems, circuit breakers, and fuses.

CO2 Capture, Processing & Technologies - Virtual Instructor Led Training (VILT)

This course will cover the technology and costs of CCS capture technologies with a focus and will include discussion on the main factors affecting separation, their technology readiness and levelized costs.

Thermal Power Plant Performance Testing

This 5 full-day course provides a detailed description of all performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, deaerators, and feedwater heaters.

Boiler Tuning

This 5 full-day course provides detailed description of all the tuning methods for all the control systems used in pulverized coal boilers, circulating fluidized bed (CFB) boilers, cyclone boilers and stocker boilers.

Green Hydrogen Finance Simulation from Investment to Monetization – Virtual Instructor Led Training (VILT)

As the world transitions towards a more sustainable energy future, green hydrogen has emerged as a promising solution with numerous applications and environmental benefits. However, the successful deployment of green hydrogen projects relies heavily on robust financial strategies and a deep understanding of the associated investment opportunities and challenges.

Electrical Power Failure Analysis and Investigations- Insightful Investigations For Precision Resolutions

Power systems have grown to become the single largest most connected system humans have ever designed. As we scale up in production, connectivity, and consumption, the impact of our failures become proportionately larger. Today a large blackout on the grid level may impact millions of users. A failure offers a great opportunity to asset owners, engineers and operators acquire knowledge by identifying the cause(s) and use this knowledge to enhance safety and improve performance. Failure invest...

EV Battery Design and Charger Technology - Understand The Applications Of Sustainable Mobility

In the rapidly evolving landscape of transportation and energy, Electric Vehicles (EVs) infrastructure have emerged as a transformative force, redefining the way we envision and interact with mobility. At the heart of this revolution lies the intricate interplay between EV Battery Design and Charger Technology, two pivotal components shaping the efficiency, range, and sustainability of whole electric vehicle transportation. EV Battery Design stands as the cornerstone of electric mobility, in...

Transformer Operational Principles, Design, Selection, Maintenance and Troubleshooting for Oil and Gas and Utilities

Transformers are major components of electrical power systems. This 5 Day course combines theoretical and practical aspects of transformer design, operation, maintenance and troubleshooting. The course emphasizes the importance of the magnetic properties of the core design on the transformer’s operational performance and electrical properties. It addresses economic trade-offs of transformers in real-world applications.

Power System with Large Component of Solar, Storage and Distributed Energy Resources (DER)

This 5 full-day course provides a comprehensive overview of the challenges and opportunities in the rapidly evolving field of renewable energy integration and power system management. Energy professionals taking this course would likely gain valuable insights into the technical, operational, and financial aspects of working with renewable resources in the energy industry. It will assist all energy professionals in the planning and operation of a power system with increasing penetration of ren...

Design of Circulating Fluidized Bed Boilers

This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail.

Maintenance of Steam and Gas Turbines: Inspection, Diagnostic Testing, Troubleshooting, Maintenance, Overhaul and Refurbishment

This 5 full-day course provides a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all steam and gas turbines

The Impact of Electric Vehicles (EVs) on the Grid - Virtual Instructor Led Training (VILT)

Electrification of the transportation sector will impact the power system in several ways.

Hydrogen - Technology, Economics and Business Cases - Virtual Instructor Led Training (VILT)

Asia Pacific is set to be the largest and fastest growing Hydrogen market globally. This growth is driven by decarbonisation of energy-use, ammonia production and rising demand of fuel cell electric vehicles. This course aims to clarify and assess the hydrogen business case along its value chain and versatile market applications.

Electricity Cooperative Rate Regulation and Rate Setting

Yield Assessment, Design and Monitoring of Solar Photovoltaic Power Plants- For Bankable System Simulations Using PVsyst Software

PVSyst is a software tool used extensively in the solar photovoltaic industry to simulate and estimate the energy production of PV systems. Participants will be provided with a comprehensive understanding of how to effectively utilise PVSyst for bankable solar energy yield assessments and to assist in the design of both grid-connected and hybrid solar PV systems.

Economic and Financial Analysis of Renewable Energy, Storage and Hydrogen

Economic and Financial Analysis of Renewable Energy is a 3-day course that will work through the analysis of different renewable technologies, including LCOE, financing, resource analysis and pricing.

Advanced Load Forecasting & Methodology

This 5 Full-day training course will look at the latest statistical and mathematical forecasting frameworks used by industry practitioners to tackle and manage the issue of load forecasting that cuts across short and long time scales.

Introduction to Carbon Capture and Storage (CCS) for Non-Technical Professionals

Carbon Capture and Storage (CCS) is an upcoming new technology that has a vital place within global efforts to decarbonise. It has a unique set of challenges, opportunities and risks to be understood and accommodated within appropriate legal, regulatory, and social and public licence frameworks. The course has a strong international and global south emphasis with case studies on CCS projects and will touch on the role of CCS in developing country energy transition. The course satisfies a part...

Compressors & Pumps: Selection, Applications, Operation, Troubleshooting and Maintenance

This 5 full-day course will provide a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

Combustion Engineering for Coal Fired Power Plants

This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans.

Introduction to Power Systems

This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control.

Root Cause Analysis for Boilers and Steam Cycle Failures

This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology.

Heat Rate Optimization of Coal Power Plants

This 5 full-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants.

Steam Turbine Technology

This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Heat Rate Optimization of Coal Power Plants

This 5 full-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants.

Mooring and Anchoring Technology in Floating Photovoltaic (FPV) Systems - Site Evaluation, Innovative Structure, and Sustainable Practices

Floating solar represents a relatively new sector, employing innovative technology and expertise related to flotation systems, mooring, and anchoring. The mooring and anchoring of the floatation system are one of the most challenging aspects of this new technology. A mooring system is essential to keep the FSPV array in place with minimum movement based on project tolerances and to maintain sufficient clearance between neighbouring arrays or between an array and other assets (such as pipeline...

Demand Side Management

The energy sector is undergoing a profound paradigm shift, characterized by the convergence of cutting-edge technologies, regulatory dynamism, and the escalating integration of renewable energy resources. This course delves into the technical intricacies of advanced methodologies for energy management. The course scrutinizes demand response and energy conservation programs, highlighting their implications on energy efficiency, grid stability, and sustainable energy practices.

Electrical Generators, Excitation Systems and Governing Systems

This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.

Apollo Root Cause Analysis™ Methodology- Solve Complex Problems and Prevent Recurrences of Failures

The Apollo Root Cause Analysis™ methodology course is a comprehensive 2-day training designed to equip participants with the essential skills and knowledge for effective problem analysis and investigation. This course is particularly beneficial for professionals who regularly encounter incidents or failures that could recur, including those who lead investigations and produce reports.

Safety and Performance Aspects of Batteries for Energy Storage Systems for Utilities (Large Scale) - Empowering Sustainable Energy with Reliable and Safe Battery Solutions

Batteries are considered to a key component in the transition towards low to zero emission in the energy sector, which is more and more determined by renewable sources. Batteries can store renewable generated electrical energy in large quantities to compensate their fluctuations in generation.

Transmission Lines: Design, Analysis and Applications

The objective of this 5-day training course is to deal appropriately with control systems, design characteristics and electric & magnetic fields.

Smart Grid, Smart Metering and Power Quality Analytics

This 5-day course will equip you with the innovations that are shaping the power generation and distribution systems and will cover topics ranging from Smart Metering Architecture, Cybersecurity, Smart Grid Systems and Power Line Communications.

Mooring and Anchoring Technology in Floating Photovoltaic (FPV) Systems - Site Evaluation, Innovative Structure, and Sustainable Practices

Floating solar represents a relatively new sector, employing innovative technology and expertise related to flotation systems, mooring, and anchoring. The mooring and anchoring of the floatation system are one of the most challenging aspects of this new technology. A mooring system is essential to keep the FSPV array in place with minimum movement based on project tolerances and to maintain sufficient clearance between neighbouring arrays or between an array and other assets (such as pipeline...

Large Scale Hydrogen Production - Electrolyser Technologies & Electrolysis Interfaces

Hydrogen is considered to a key component in the transition towards low to zero emission in the energy sector. Hydrogen is a versatile energy carrier and a widely used resource in the chemical industry. In order to decarbonize existing hydrogen use, clean hydrogen must be used. Hydrogen, as a chemical molecule, is perfectly suitable to store large amounts of energy, even for longer times and to transport energy between countries and even to enable the use of renewable energies across industry...

Maintenance of Rotating Equipment: Diagnostic Testing, Troubleshooting, Maintenance, and Refurbishment

This 5 full-day course will provide a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all rotating equipment including centrifugal pumps, centrifugal and axial compressors, steam and gas turbines.

Transforming Waste into Energy - Best Practices for Sustainable Power Generation

Waste generation increases daily as populations grow and economies develop. Traditionally, waste disposal has relied on landfilling, leading to greenhouse emissions and other pollutions. Meanwhile, our energy needs are rising. An innovative solution addressing both issues can be implemented by transforming waste into electricity, fuels, and heat through advantageous Power Purchase Agreements. Converting waste to energy is the most sustainable and renewable approach to reduce fossil fuel relia...

Relay Protection in Power Systems

This 2-day course will immerse you with a solid understanding on the importance of relay protection in determining high voltage network expansion limitations, day to day operation and equipment maintenance activities.

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

Safety and Performance Aspects of Batteries for Energy Storage Systems for Utilities (Large Scale) - Empowering Sustainable Energy with Reliable and Safe Battery Solutions

Batteries are considered to a key component in the transition towards low to zero emission in the energy sector, which is more and more determined by renewable sources. Batteries can store renewable generated electrical energy in large quantities to compensate their fluctuations in generation.

EPCC and O&M Agreements in Solar PV Projects Development- Bridging the Commercial and Technical Terms in Sustainable Energy Projects

The global renewable energy landscape is experiencing unprecedented growth, with solar photovoltaic (PV) projects leading the charge. The International Renewable Energy Agency has reported a significant surge in solar PV capacity, contributing substantially to the global energy. This solar growth presents immense opportunities for companies in the power utilities, renewable energy and EPCC sector. Industry projections suggest that in the coming years, significant EPCC contracts are expected ...

Steam Turbine Technology

This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Electrical Substation: Design, Construction & Commissioning

This 5-day course in substation design fundamentals will guide you through a step-by-step study of the civil and electrical substation design and construction process.

Power System Analysis & ARC Flash Safety for Utility Application

This 4-day training course aims to make electrical systems safer with a balance of theory and practice that will provide a firm foundation of knowledge for your daily operations.

Thermal Power Plant Performance Testing

This 5 full-day course provides a detailed description of all performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, deaerators, and feedwater heaters.

Electrical Overhead and Underground Distribution Systems

This 5 Day course covers the special knowledge and skills needed for the efficient implementation of safe and economical electrical distribution projects. Through interaction with your instructors and fellow participants, you will learn about planning and design considerations, overhead conductors, structure types and loading, fault protection coordination, arc flash, system grounding and electrical and mechanical characteristics of cables.

Switchgears and Transformers: Selection, Maintenance & Testing

Using the latest technology, this 4-day course addresses the above objectives by covering the successful operation of motors, variable-speed drives, transformers, generators, rectifiers, inverters, uninterruptible power systems, circuit breakers, and fuses.

Steam Turbine Technology

This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Electrical Generators, Excitation Systems and Governing Systems

This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

HV & MV Power System Design, Protection & Coordination - Virtual Instructor-Led Training (VILT)

This 5 half-days training course addresses all aspects of industrial & utility power systems, including system planning, equipment selection, specification and application, system grounding, protection and conformity with electrical code requirements etc.

Renewable Energy Corporate Power Purchase Agreements

The global renewable electricity generation capacity is growing with an unprecedented speed. Half of the growth in the power production across the globe is now coming from renewables, led by wind, solar PV and hydropower. Within the next 5 years the share of renewable technologies meeting global energy demand will reach 30% of the total world electricity generation.

Hydrogen Market Entry Strategies

This course is aimed at preparing participants to design and implement market entries in the emerging hydrogen markets worldwide. The course first provides the necessary tools to select attractive hydrogen markets based on defined criteria and business goals of the company entering the market. The course consequently defines different approaches to enter hydrogen markets based on the company starting point and comparative advantages, while also defining the business processes and team choices...

Fundamentals of Data Communications for Upstream Operations In Oil and Gas

This comprehensive 5-day training course covers the fundamentals of communication systems and solutions critical for upstream operations in modern oil and gas sites. As oil and gas operations become more complex and distributed, reliable and robust communication systems are essential for efficient operations and safety.

Electrical Power Substation Engineering, Insulation Coordination Transient Recovery Voltage and EMF

The electric power substation, whether generating station or transmission and distribution, remains one of the most challenging and exciting fields of electrical power engineering. Recent technological developments have had a tremendous impact on all aspects of substation design and operation.

Decision-based Geothermal Field Development

Transmission Lines: Design, Analysis and Applications – Virtual Instructor Led Training (VILT)

Transmission lines and sub-stations are essential components in the electrical power systems. Proper design and maintenance are crucial for transmission lines to maintain a continuous operation. The objective of this 5-day training course is to deal appropriately with control systems, design characteristics and electric & magnetic fields. Participants will gain a better understanding on the corona and gap discharge phenomena, constructional features, and optimization of the transmission lines.

Certified Asset Management Assessor (CAMA) Certification Preparatory Course

The CAMA Course provides the asset management knowledge to enable course participants to perform the role of an auditor/assessor and undertake activities as a member of a team of auditors/assessors. This course is designed to give individuals an efficient overview of the recommended preparation material for the CAMA Exam. These materials provide insight into: (1) the ISO 5500x framework of documents, (2) the GFMAM Asset Management Landscape and (3) the GFMAM Competency Specification which ind...

Cross Border Electricity Trading in South East Asia

This 5 Full-day highlights the impact of advanced Renewable Generation, Digital Technologies and NEW Operational flexibility solutions on the Energy Market. These advancements facilitate a more intense cross border trading. Most countries designed their own portfolio of climate actions with an accelerated penetration of renewable energies or, importing renewable energy. These changes take place at unprecedented speed and add further complexity to the operation of electricity markets, while p...

Floating Solar Farms (FPVS) - Technical Architecture, Operations and Economics

Countries around the world are focusing on ramping up their solar photovoltaic (PV) production capacity as part of their efforts to decarbonize power generation. Floating solar farms (FPVs) indeed offer a promising solution to address the issue of limited land availability for traditional PV power plants and offer major operational advantages, despite some challenges they present.

Electricity Markets and Trading – Europe – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course has valuable lessons to be learned from the electricity market reform in Europe that started some 25 years ago. The trainer, will present all that time and will share his practical experiences and insights about what happened and what is the situation of the deregulation and design of a competitive electricity market place today and in the future.

Grounding System Design, Testing and Power Quality Application for Oil and Gas and Utilities Application

Grounding (earthing) and bonding systems ensure that electrical systems are safe from electric shock and fires by limiting the voltage imposed by lightning, line surges, or unintentional contact with high voltage lines as well as an earth fault. An integrated approach of theory and practice will ensure you have a firm foundation of knowledge when you begin your next design or construction project, or when you encounter problems in your electrical system which must be corrected for safety, ope...

Testing, Maintenance, and Commissioning of Electrical Power System

This detailed course provides guidelines to anyone who wishes to know and understand the role of commissioning and safety in a project, whatever its size. The importance of planning and preparation for the project, from engineering to commissioning and start up, will be emphasized. This course deals with safety considerations in maintenance and testing procedures for all the components of any electrical system. It also discusses field testing of all the major components of an electrical syste...

Floating Solar Farms (FPVS) - Technical Architecture, Operations and Economics – Virtual Instructor Led Training (VILT)

The VILT course discusses mainly projects from ASEAN countries and other jurisdictions including hybrid projects from Canada and the United States with installations on hydroelectric reservoirs. The flexibility of the invertor-based resources facilitates a higher penetration of floating or land PVs, Battery Electricity Storage Systems (BESS) and demand response.

Commissioning of Combined Cycle Power Plants

This 5 Day course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants

Substations, Extra High Voltage Transmission and Distribution System, Grid Protection, Stability and Disturbances

This 5 full-day course will provide a comprehensive understanding of substations, extra high voltage transmission and distribution system, grid protection, stability and disturbances.

Interference of High Voltage AC / High Voltage DC Power Lines on Metallic Pipelines and Its Mitigations

The location of steel pipelines in the vicinity of HVAC or HVDC power transmission facilities has resulted in mutual electrical interference problems that can produce damaging effects on both utilities and an electrical hazard to pipeline personnel. The pervasive use of the utility corridor concept necessitates that the electrical interference aspects be clearly defined and guidelines to minimize the harmful effects be incorporated into pipeline and power line specifications, designs, and ope...

Commissioning and Start-Up Activities of Coal Power Plants

This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants.

Industrial Instrumentation and Modern Control Systems

This 5 full-day course provide a comprehensive understanding of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, HART protocol, control valves, actuators, and smart technology.

Commissioning of Electrical Equipment

This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment

Ultra Supercritical Steam Power Plants: Design, Selection, Applications, Operation, Maintenance, Performance Monitoring, Power Augmentation, Emission Control Methods, Carbon Capture Technology, Economics, Profit Optimization, Revenue and Life Cycle Cost Analysis

This 3 full-day course will cover all aspects of ultra supercritical steam power plants and advanced ultra supercritical power plants.

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers

This 5 full-day course will provide ample opportunity for robust technical discussion and expand on advanced concepts in thermal power plant cycle chemistry. It focuses only on the steam/water aspects of the thermal power cycle.

Electrical Engineering for Non-Electrical Engineers

This 5 full-day course is for individuals who would like to gain a thorough understanding of all the principles of electrical engineering in a simple and easy to grasp format.

Performance Analysis for Diesel Engine Power Plant

This 5 full-day course will provide in-depth coverage of the selection, layout, operation, inspection, diagnostic testing, troubleshooting, maintenance, refurbishment, performance monitoring, power augmentation, and economics of all types of diesel engine power plants.

Power Quality & Harmonics in Power Systems

This training will focus on the effect the customer loads have on the supply grid, and ensure that the customer load network connection does not negatively impact the grid network.

Volt-VAR Optimization

The main focus of this 3 full-day course is to provide managers, engineers and technicians with the fundamental knowledge to research the current and future trend of VVO technologies on the market, assess the network readiness and plan for VVO trial and deployment, Implement SCADA, communication infrastructures, VVO equipment and sensors and operate and maintain VVO schemes that is fit for purpose.

Transformer Maintenance

This 3 full-day course will provide a comprehensive understanding of the various types of transformer maintenance including breakdown maintenance, preventive maintenance, total productive maintenance, condition-based maintenance, proactive maintenance, and reliability-centered maintenance.

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

This 5 full-day course provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment

Combined Cycle Gas Turbine Performance

This 5 full-day course will focus on all aspects of combined cycle power plants.

Steam Turbine Design – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course will cover all aspects of steam turbine design including blade design and material, operating principles, sizing and selection procedures, inspection, diagnostics, maintenance and overhaul of steam turbines, steam turbine start-up and shutdown procedures, surveillance and health monitoring of steam turbines, governing systems as well as all the components, instrumentation and control systems of steam turbines, and address root caus...

High-Pressure Multistage Pumps Design, Selection, Operation and Condition Monitoring

This advanced 5-day training course on high-pressure multistage pumps will help you comprehend their design, operation and maintenance.

Thermal Power Plant Pumps: Design, Selection, O & M and Condition Monitoring

This 5-day training course will focus on main circuit pumps for Thermal and Combined Cycle Power plants which includes design, selection, operation and maintenance and condition monitoring.

Electricity Trading

By participating in this course, participants will gain the required knowledge, insights and access to best practices to successfully operate in the changing electricity market environment of their country.

Advanced Load Forecasting & Methodology – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course will look at the latest statistical and mathematical forecasting frameworks used by industry practitioners to tackle and manage the issue of load forecasting that cuts across short and long time scales.

Large Scale Solar & Energy Storage - System Operations – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course will assist energy professionals in the planning and operation of a power system from renewable energy sources. The VILT course will discuss key operating requirements for an integrated, reliable and stable power system.

Assessing and Managing Cyber Security Risks for Essential Services Operators – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course will help participants grasp the idea of real-world risk management and how this relates to the cyber world. It will cover topics surrounding identifying cyber risks and vulnerabilities, guidance on applying administrative actions, and comprehensive solutions to ensure your organization is adequately secure and protected.

Engineering, Procurement & Construction Contracts (EPC) - Virtual Instructor Led Training (VILT)

Our 5 half-day Virtual Instructor Led Training (VILT) course focuses on key concepts in EPC contract management and how to overcome challenges throughout every stage of the contractual process and negotiations.

Green Hydrogen Production from Offshore Wind – Virtual Instructor Led Training (VILT)

This 2 half-day Virtual Instructor Lead Training (VILT) course will examine the technological options for on-site production of hydrogen by electrolysis (onshore or offshore directly at the platform) as well as the transport of hydrogen (pipeline or ship). This VILT course will also explore the economic considerations and the outlook on future market opportunities.

Relay Protection in Power Systems - Virtual Instructor Led Training (VILT)

This 4 half-day Virtual Instructor Led Training (VILT) course will provide participants with a comprehensive and technical overview on relay protection and its applications in practice.

Hydrogen for Firm Power Generation – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course will provide participants with a comprehensive and up-to-date introduction to the prospects for hydrogen in future power mixes.

Environmental Social and Governance Reporting (ESG) – Regulation, Standards and Trends – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) interactive course will equip you to understand and apply a range of standards and tools that can shape your company's Environmental, Social and Governance (ESG) reporting requirements.

Cross Border Electricity Trading in Asia - Renewable Energy, Digital Technologies and New Operational Flexibility Solutions – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course highlights the impact of the introduction of renewable energy, digital technologies and new operational flexibility solutions in the electricity trading market. These advancements facilitate unique opportunities and challenges for cross border trading of electricity.

Advanced Level – Assessing and Monitoring the Condition of Power Transformers by Oil Analysis – Virtual Instructor Led Training (VILT)

The objective of this 4-half-day Virtual Instructor Led Training (VILT) course is to equip participants with the required knowledge so that they can define and implement an effective oil analysis programme, monitor the condition of transformers and understand oil analysis reports as part of their maintenance strategy.

Maintenance Management, Interpretation of Schematic Diagram and Troubleshooting on Electrical Equipment – Virtual Instructor Led Training (VILT)

This 3 half-day VILT course aims to provide an understanding of the fundamentals of operation and maintenance of electrical system and how to read and interpret the electrical schematic diagram, electrical safety at switchgear, electric motor, transformer as well as earthing system at facilities.

Hydrogen Storage & Transportation – Virtual Instructor Led Training (VILT)

This VILT course will provide participants with a thorough understanding of how hydrogen fuel can be stored, transported and distributed from production to end-use – and why this is of central importance in determining how the hydrogen landscape will develop.

Introduction to Offshore Wind: Technology, Projects & Economics - Virtual Instructor Led Training (VILT)

This VILT course is intended to help participants understand the offshore wind technologies, trends, processes and financial return and risk considerations involved in project development.

Assessing the Water-Steam Chemistry Cycle in Thermal Power Plants – Virtual Instructor Led Training (VILT)

This 2-half-day Virtual Instructor Led Training (VILT) course will discuss the chemical aspects of the water-steam cycle in a power plant. The VILT course will examine the different types of chemicals used in boilers, potential issues in a water-steam cycle as well as aspects of monitoring and specifications regarding target values and alarm levels. Participants will also be equipped on what to do or key action steps to take in the event of chemistry-related incidents.

Assessing the Safety of Hydrogen Installations – Virtual Instructor Led Training (VILT)

The goal of this course is to provide insights to engineers and project managers working on hydrogen processes who are concerned with the specific risks of hydrogen installations.

Control Valves and Actuators - Virtual Instructor Led Training (VILT)

This 3-half day virtual instructor led training course (VILT) will provide a comprehensive understanding of the various types of control valves and actuators, including linear and rotary control valves; pneumatic, piston, electric, and electrohydraulic actuators.

Performance Analysis for Diesel Engine Power Plant - Virtual Instructor Led Training (VILT)

This 5 half-day VILT will provide in-depth coverage of the selection, layout, operation, inspection, diagnostic testing, troubleshooting, maintenance, refurbishment, performance monitoring, power augmentation, and economics of all types of diesel engine power plants.

Utility Commercial, Industrial & Community Scale Energy Storage (U/C&I/CES) Systems 3.0 – Virtual Instructor Led Training (VILT)

This course will allow participants to gain more practical and theoretical knowledge about Utility Commercial Industrial and & Community Energy Storage Systems (U/C&I/CESS) with a focus on types of System Design, Specification, Project Implementation and the Future of U/C&I/CES systems.

Utility Commercial, Industrial & Community Scale Energy Storage (U/C&I/CES) Systems 2.0 – Virtual Instructor Led Training (VILT)

This VILT will allow participants to gain more practical and theoretical knowledge about Utility Commercial, Industrial & Community Energy Storage Systems (U/C&I/CESS) with a focus on Planning, Project Development and Value Stacking with current case studies of the various system types.

Motors & Variable Frequency Drives (VFD) - Virtual Instructor Led Training (VILT)

This VILT will provide a comprehensive understanding of the various types of motors and variable frequency drives (VFD’s).

Steam Turbine Technology - Virtual Instructor Led Training (VILT)

This 5 half-day online course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Demand Side Management - Integration of New Technologies, Regulatory Changes & Renewable Energy Resources - Virtual Instructor Led Training (VILT)

This Virtual Instructor Led Training (VILT) course presents advanced methodologies that implement demand response and energy conservation programs in light of the integration of new technologies, regulatory changes and the accelerated penetration of renewable energy resources.

Renewable Energy Economics & Finance - Virtual Instructor Led Training (VILT)

This course will help you to understand the specific economics around the various renewable energy technologies and how to structure financing for a successful business case.

IPPs & Power Project Finance - Virtual Instructor Led Training (VILT)

Tailored to the specific challenges power projects face in an emerging market environment, this course will be heavily based on real case studies and lessons learned instead of theoretical concepts.

Battery Economics and Business Models - Virtual Instructor Led Training (VILT)

This course will help you to understand how to map business opportunities and structure the case around utility scale battery projects.

Preventing Corrosion and Wear Using Surface Engineering - Virtual Instructor Led Training (VILT)

Find out how coatings and treatments function to protect against corrosion and wear.

Predictive Maintenance of Electrical Equipment - Virtual Instructor Led Training (VILT)

Predictive, or condition-based maintenance offers companies the least expensive, most efficient method of reducing equipment-related downtime and improving plant safety.

Mechanical Seals: Selection, Applications, Operation, Troubleshooting, and Maintenance - Virtual Instructor Led Training (VILT)

This VILT will provide a comprehensive understanding of the various types of mechanical seals and other methods of sealing rotating equipment including conventional packing, condensate injection sealing, and floating seal rings.

Mechanical Engineering for Non-Mechanical Engineers - Virtual Instructor Led Training (VILT)

This VILT is for individuals who would like to gain a thorough understanding of all the principles of mechanical engineering in a simple and easy to grasp format.

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment - Virtual Instructor Led Training (VILT)

This VILT provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment including: transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries.. 

Distributed Control Systems and Smart Technology - Virtual Instructor Led Training (VILT)

This seminar will provide a comprehensive understanding of distributed control systems (DCSs), and smart technology. 

Gas Turbine Bearings - Virtual Instructor Led Training (VILT)

Electrical Switching, Interpretation of Schematic Diagram & Earthing on Switchgears - Virtual Instructor Led Training (VILT)

Switchgear is also known as an electro-mechanical equipment or device used to close and open circuit.

Cyber Security for Operational Technology - Virtual Instructor Led Training (VILT)

With compliance regulations and cyber incidents increasing, we will bridge the gap between traditional IT security and the world of electricity utilities to help utilities meet their operation resilience requirements.

Operations, Maintenance and Testing of Power Transformer & Electric Motors - Virtual Instructor Led Training (VILT)

The objective of this training course is to provide an understanding of power transformers and electric motors, their materials, components, and how they operate.

Best Operation Practices for a Hydro Electric Power Plant - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of all the best operation practices for a hydro-electric power plant.

Introduction to Energy Transition – Virtual Instructor Led Training (VILT)

Man induced climate change is now an accepted phenomenon that has become one of the most pressing crises humanity faces today. As the most abundant greenhouse gas in our atmosphere, CO2 levels have risen from a pre industrial baseline of 280 ppm to ~410 ppm leading to a rise in average global temperatures at a rate unprecedented in geological past.

Economic & Financial Analysis of Renewable Energy, Storage and Hydrogen – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course will discuss the analysis of different renewable technologies including LCOE, financing, resource analysis and pricing.

Heat Rate Optimization of Coal Power Plants - Virtual Instructor Led Training (VILT)

This 5 half-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants.

Commissioning of Combined Cycle Power Plants - Virtual Instructor Led Training (VILT)

This course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants.

Commissioning and Start-up Activities of Coal Power Plants - Virtual Instructor Led Training (VILT)

This course provides a comprehensive understanding of all the commissioning and start-up activities of coal power plants.

Combined Cycle Gas Turbine Performance - Virtual Instructor Led Training (VILT)

This course will cover all aspects of combined cycle power plants.

Microgrids - Understanding and Developing Effective Deployments - Virtual Instructor Led Training (VILT)

This course will provide an in depth analysis of Microgrid Systems.

Introduction to Power Systems - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control.

Industrial Instrumentation and Modern Control Systems - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of modern control systems, digital control, Distributed Control Systems (DCSs), Supervisory Control And Data Acquisition (SCADA) systems, industrial instrumentation, control valves, actuators and smart technology.

Electrical Generators, Excitation Systems and Governing Systems - Virtual Instructor Led Training (VILT)

In overall, this course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVR’s), governing systems, and protective systems.

Electric Vehicle Business Models & Strategies - Virtual Instructor Led Training (VILT)

The aim of the course is to provide you with an overview knowledge of the electric vehicle business.

Coal Mining Fundamentals - Virtual Instructor Led Training (VILT)

The coal industry remains an integral part of the international energy mix and is vital to the developing economies of SE Asia.

Rotating Equipment - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of the various types of rotating equipment, including centrifugal pumps, centrifugal and axial compressors, and motors.

Compressors & Pumps: Selection, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting and Maintenance – Virtual Instructor Led Training (VILT)

This course is a must for anyone who is involved in the selection, applications or maintenance of reciprocating, rotary, and centrifugal pumps or compressors because it covers how this equipment operates, the latest maintenance techniques, and provides guidelines and rules that ensures the successful operation of this equipment.

Best Practice Risk Management Offshore Wind Projects - Virtual Instructor Led Training (VILT)

Learn how the leading energy companies in the world are managing the risks of the business case, construction and operation of new to build offshore wind parks.

Utility and Community Scale Energy Storage Systems - Virtual Instructor Led Training (VILT)

This course will provide a detailed analysis of Utility and Community Scale Energy Storage (U&CES) Systems.

Mini Hydro Power Plant - Virtual Instructor Led Training (VILT)

This 5-half day Virtual Instructor Led Training (VILT) course will provide a comprehensive understanding of all the best operation practices for a mini (smaller than 25 MW) hydro-electric power plant.

Commissioning of Electrical Equipment - Virtual Instructor Led Training (VILT)

This course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment including transformers, switchgear, induction and synchronous motors, generators and auxiliaries.

Coal: Pit to Port to Power - Virtual Instructor Led Training (VILT)

The course is generally applicable to anyone who would like to understand more about coal.

Uninterruptible Power Systems (UPS) - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of the various types of uninterruptible power systems (UPS's), inverters, rectifiers, variable frequency drives (VFD), and industrial batteries.

Gas Turbines and Co-Generation Plants - Virtual Instructor Led Training (VILT)

This course will cover all aspects of gas turbines and co-generation plants.

Ultra Supercritical Steam Power Plants - Virtual Instructor Led Training (VILT)

This course will cover all aspects of ultra supercritical steam power plants and advanced ultra supercritical power plants.

Transformer Maintenance - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of the various types of transformer maintenance including breakdown maintenance, preventive maintenance, total productive maintenance, condition-based maintenance, proactive maintenance, and reliability-centered maintenance.

Grid-tied Photovoltaic Systems in a Net-metering Context - Virtual Instructor Led Training (VILT)

This course will provide an in depth analysis of Grid-tied Photovoltaic Systems (PV) and Net-metering.

Electricity Pricing and Marginal Cost Analysis - Virtual Instructor Led Training (VILT)

Forward pricing and valuation in electricity generation is a 4 half day intensive, technical hands-on course in which attendees receive comprehensive instruction on the theory and practice of making price forecasts and assessing risk in the electricity generating industry.

Boiler Tuning - Virtual Instructor Led Training (VILT)

This 5-day course provides detailed description of all the tuning methods for all the control systems used in pulverized coal boilers, circulating fluidized bed (CFB) boilers, cyclone boilers and stocker boilers.

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers - Virtual Instructor Led Training (VILT)

This is an advanced chemistry training course for power plant chemists and boiler engineers wishing to expand their knowledge and skills, and to become more effective in their day to day roles dealing with thermal power plant chemistry

Volt-VAR Optimization - Virtual Instructor Led Training (VILT)

Voltage/VAR management or control is essential to electrical utilities' ability to deliver power within appropriate voltage limits so that consumers' equipment operates properly, and to deliver power at an optimal power factor to minimize losses.

Power Purchase Agreements - Virtual Instructor Led Training (VILT)

According to the IEA “More than 70% of the $2 trillion required each year in energy supply investment either comes from state-directed entities or receives a full or partial revenue guarantee.”

Electricity Project Finance Modelling Analysis - Virtual Instructor Led Training (VILT)

This course will provide you with the ability to understand nuances of project finance theory through creating and understanding project finance models.

Geothermal Project Finance Analysis and Modelling - Virtual Instructor Led Training (VILT)

This 4 half-day Virtual Instructor Led Training (VILT) course will address a variety of contract and loan structuring issues associated with geothermal energy projects as well as comparison with solar, wind and battery storage.

Computer Simulation of Gas Turbines, Co-Generation and Combined Cycle Power Plants - Virtual Instructor Led Training (VILT)

This course provides in depth computer simulation of gas turbines under steady-state and transient conditions.

Introduction to Power Generation - Virtual Instructor Led Training (VILT)

This course will cover all aspects of steam power plants, gas turbines, co-generation, combined cycle plants, wind and solar power generating plants.

Electrical Engineering for Non-Electrical Engineers - Virtual Instructor Led Training (VILT)

This course is for individuals who would like to gain a thorough understanding of all the principles of electrical engineering in a simple and easy to grasp format.

Advanced LNG Hedging - Virtual Instructor Led Training (VILT)

This course will look at some of the trading strategies and hedging tactics that can be utilised in this growing market area.

Carbon Capture Economics and Business Models - Virtual Instructor Led Training (VILT)

Currently some 40 megatonnes of Co2 are captured and stored annually with dozens of new projects representing some USD 30bn investments being announced since 2017.

LNG Markets, Pricing, Trading & Risk Management - Virtual Instructor Led Training (VILT)

This 5 half-day intensive intermediate level Virtual Instructor Led Training (VILT) course will give you cutting-edge knowledge needed in today’s complex LNG market.

Process Safety Management & Engineering Applications - Virtual Instructor Led Training (VILT) [IChemE Approved Training Course]

This Virtual Instructor Led Training (VILT) course covers all the main elements of IChemE’s Process Safety Competency framework: culture, knowledge and competence, engineering and design, human factors, systems and procedures, and assurance.