Gas Turbines, Co-Generation and Combined Cycle Power Plants

This 5 full-day course will cover all aspects of gas turbines, co-generation and combined cycle power plants.

Combustion Engineering for Coal Fired Power Plants

This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans.

Process Control and Instrumentation

This course will begin with a presentation of topics to familiarize Process and Instrumentation Engineers with procedures and practices involved in the choice of sensors related to the measurement of temperature, pressure, level and flow in relation to single-phase flows.

Maintenance Planning, Scheduling & Control

This course is based on an integrated maintenance model that has been used by leading companies and consultants with success and recognised as best practice.

Steam Turbine Technology

This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Pipeline Integrity Management – Incorporating API 1160 / 1173 and ASME B31.8S

This 3 full-day course provides a sound review of Pipeline Integrity Management strategies, in compliance with regulatory requirements, including self-assessment.

Heat Rate Optimization of Coal Power Plants

This 5 full-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants.

API 570: Piping Inspector Certification Preparatory Course

This program is designed for in depth understanding of Inspection of piping and pipelines under operation and in-service as per API 570. This preparatory course will prepare inspectors to ensure piping and pipeline integrity in service. Practical aspect of design considerations, sizing, rating, piping and pipeline integrity, internal inspections, analysis, repair, pressure testing, and pipeline protection shall be discussed. The program shall also provide more information about types of pipin...

Produced Water for Upstream Oil and GasProven Sustainable Technologies with Lower Maintenance

Produce water for upstream oil and gas course is designed to provide you with a deep understanding of produced water and its treatment in the context of the oil and gas industry. Produced water, the water that comes to the surface during oil and gas production, presents unique challenges and requires specialized treatment to ensure compliance with environmental regulations and to protect the surrounding ecosystems.

Asset Integrity & Life Extension

Asset life extension allows organizations to maximize the utilization of their resources. Instead of discarding assets prematurely, they can continue to extract value from them by leveraging their remaining useful life. This is especially beneficial when assets are still capable of meeting operational requirements and no compelling reasons for replacement exist. By extending the life of existing assets, organizations also help to conserve resources, reduce waste generation, and minimize their...

Advanced Heat Exchanger Design, Performance, Inspection, Maintenance and Operation

This 3-full day course will focus on the design, performance and operation of modern heat exchangers requires an understanding of the principles of heat transfer and fluid flow, coupled with access to numerically based techniques and supporting data. This course will review heat transfer fundamentals as applied to tubular and plate devices.

Introduction to Floating Production, Storage and Offloading Vessels (FPSO) - Design & Technology

This course has been designed to help participants to acquire the fundamental knowledge of FPSO Vessels (both New Builds, Tanker Conversions and Re-Deployment FPSOs) and to see why they are so widely used by the offshore industry.

CO2 Capture, Processing & Technologies - Virtual Instructor Led Training (VILT)

This course will cover the technology and costs of CCS capture technologies with a focus and will include discussion on the main factors affecting separation, their technology readiness and levelized costs.

Combustion Engineering for Coal Fired Power Plants

This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans.

Design, Planning and Executing in Heavy Lifting – Virtual Instructor Led Training (VILT)

Through the use of videos, animations, discussions and presentations, this 4 half-day advanced Virtual Instructor Led Training (VILT) course has been designed to train personnel with more than five years of experience and organisations involved with heavy lifting and transports and equip them with the relevant knowledge to prevent costly accidents and improve safety performance.

LNG Fundamentals – Technical, Commercial, Standards and Safety Considerations in the LNG Industry Value Chain

This introductory level 3 full-day course provides a solid foundation to understand Gas and LNG Businesses by covering the relevant Technical, Commercial, Financial and Contractual aspects. Real-life examples will help to illustrate the main concepts and possibilities.

Topsides Processing Systems

This 3 day training course will demonstrate how these equipment are integrated in the layout on the facility deck. It is illustrated with FPSO process equipment, but is not limited to such systems.

Gas Conditioning and Processing

This 3 full-day course covers the design of systems for natural gas handling and treatment from the wellhead to the gas processing plant to achieve marketable products that meet desired product specifications.

Introduction to Carbon Capture and Storage (CCS) for Non-Technical Professionals

Carbon Capture and Storage (CCS) is an upcoming new technology that has a vital place within global efforts to decarbonise. It has a unique set of challenges, opportunities and risks to be understood and accommodated within appropriate legal, regulatory, and social and public licence frameworks. The course has a strong international and global south emphasis with case studies on CCS projects and will touch on the role of CCS in developing country energy transition. The course satisfies a part...

Subsea Control Systems & Umbilicals

This course will provide detailed learning to the various aspects of the design, analysis and operation of subsea control systems for a variety of field development options to allow effective management of subsea facilities either from offshore structures or from shore bases.

Maintenance Planning, Scheduling & Control

This course is based on an integrated maintenance model that has been used by leading companies and consultants with success and recognised as best practice.

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them - Virtual Instructor Led Training (VILT)

In this 5 half-day Virtual Instructor Led Training (VILT) course, the methods for managing risk in CCS projects are addressed with a focus on CO2 injection and storage.

Introduction to Carbon Capture and Storage (CCS) for Non-Technical Professionals

Carbon Capture and Storage (CCS) is an upcoming new technology that has a vital place within global efforts to decarbonise. It has a unique set of challenges, opportunities and risks to be understood and accommodated within appropriate legal, regulatory, and social and public licence frameworks. The course has a strong international and global south emphasis with case studies on CCS projects and will touch on the role of CCS in developing country energy transition. The course satisfies a part...

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers

This 5 full-day course will provide ample opportunity for robust technical discussion and expand on advanced concepts in thermal power plant cycle chemistry. It focuses only on the steam/water aspects of the thermal power cycle.

Maintenance of Rotating Equipment: Diagnostic Testing, Troubleshooting, Maintenance, and Refurbishment

This 5 full-day course will provide a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all rotating equipment including centrifugal pumps, centrifugal and axial compressors, steam and gas turbines.

FPSO Operations Management & Safety

Maintenance and Reliability Best Practices – Aligned with SMRP* Best Practices and the CMRP Certification Preparatory Course

This 4 full-day Maintenance and Reliability Masterclass course will provide Maintenance and Reliability personnel with a full explanation of the Award-winning Model of Excellence for maintenance.

Engineering, Procurement & Construction Contracts (EPC)

This 3-day training is specifically designed for professionals who are interested in enhancing their knowledge on EPC contracts.

Advanced Turnaround, Shutdown and Outage Management

This 4 full-day course is based upon the Carcharodon “Best of the Best” model of excellence for shutdown management with inputs from people who have done it from the trenches along with some of the world’s most experienced shutdown specialists.

TEMA & HTRI Heat Exchanger Design & Cost Saving Management – Virtual Instructor Led Training (VILT)

This intermediate level 5 half-day Virtual Instructor Led Training (VILT) course is a comprehensive course that explains the technology of shell and tube heat exchangers as these robust types of heat exchangers are the most commonly used in the process and refinery industries where they provide flexibility and are easy to maintain.

Best Practices in Industrial Wastewater Treatment Protecting Industry and the Environment

This course will guide delegates through all the elements involved in the treatment of industrial effluent. Delegates will receive a thorough grounding in all aspects of wastewater treatment plant design, operation and maintenance, as well as in depth information on all the latest technological developments in the field. This highly interactive course will be delivered using a combination of lectures, groupwork and individual exercises, together with video presentations. Delegates will work w...

Certified Reliability Engineer (CRE) Preparatory Course for ASQ Certification

This course will be covering the CRE Body of Knowledge (BOK) areas. It is designed to help qualified candidates prepare themselves to complete the American Society for Quality (ASQ) Certified Reliability Engineer (CRE) examination.

Compressors & Pumps: Selection, Applications, Operation, Troubleshooting and Maintenance

This 5 full-day course will provide a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps

Certified Asset Management Assessor (CAMA) Certification Preparatory Course

The CAMA Course provides the asset management knowledge to enable course participants to perform the role of an auditor/assessor and undertake activities as a member of a team of auditors/assessors. This course is designed to give individuals an efficient overview of the recommended preparation material for the CAMA Exam. These materials provide insight into: (1) the ISO 5500x framework of documents, (2) the GFMAM Asset Management Landscape and (3) the GFMAM Competency Specification which ind...

LNG Fundamentals – Technical, Commercial, Standards and Safety Considerations in the LNG Industry Value Chain

This introductory level 3 full-day course provides a solid foundation to understand Gas and LNG Businesses by covering the relevant Technical, Commercial, Financial and Contractual aspects. Real-life examples will help to illustrate the main concepts and possibilities.

Maintenance Planning, Scheduling & Control - Virtual Instructor Led Training (VILT)

With an organisation’s maintenance process only as good as its weakest link, this Virtual Instructor Led Training (VILT) will guide participants through all the key steps of a maintenance process and its supply chain. Participants will understand what is considered a good standard for each step in the maintenance process, how to identify the weakest links and subsequently how they can accelerate their performance improvement.

Asset Integrity & Life Extension

Asset life extension allows organizations to maximize the utilization of their resources. Instead of discarding assets prematurely, they can continue to extract value from them by leveraging their remaining useful life. This is especially beneficial when assets are still capable of meeting operational requirements and no compelling reasons for replacement exist. By extending the life of existing assets, organizations also help to conserve resources, reduce waste generation, and minimize their...

Flow Assurance for Offshore Production

The participants will have a total appreciation of the methodology required to develop offshore oil and gas fields and have an understanding of all of the Flow Assurance issues and technology requirements.

CO2 Capture, Processing & Technologies - Virtual Instructor Led Training (VILT)

This course will cover the technology and costs of CCS capture technologies with a focus and will include discussion on the main factors affecting separation, their technology readiness and levelized costs.

Design of Circulating Fluidized Bed Boilers

This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail.

Hydrogen - Technology, Economics and Business Cases - Virtual Instructor Led Training (VILT)

Asia Pacific is set to be the largest and fastest growing Hydrogen market globally. This growth is driven by decarbonisation of energy-use, ammonia production and rising demand of fuel cell electric vehicles. This course aims to clarify and assess the hydrogen business case along its value chain and versatile market applications.

The Principles of Asset Management – IAM Certificate in Asset Management Preparatory Course

This 4 full-day Certificate in Asset Management course will provide those involved in Asset Management with a full explanation of the key processes to manage assets across their lifecycle.

Combustion Engineering for Coal Fired Power Plants

This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans.

Process Control and Instrumentation

This course will begin with a presentation of topics to familiarize Process and Instrumentation Engineers with procedures and practices involved in the choice of sensors related to the measurement of temperature, pressure, level and flow in relation to single-phase flows.

Pipeline Defect Assessment - Virtual Instructor-Led Training (VILT)

This course provides a broad overview of analysis methods for defects in pipeline. The course begins with a summary of important material properties and a review of integrity assessment methods for pipeline defects. Analysis methods for corrosion are covered, including each of the methods cited in the most recent version of ASME B31G – Manual for Determining the Remaining Strength of Corroded Pipelines.

Storage Tank Operation, Maintenance and Safety

This course covers fixed roof tanks and floating roof tanks and explains their basic design, construction and essential maintenance with particular emphasis on how these issues control hydrocarbon vapour emissions. The course explains the features of these tanks and the equipment normally fitted on them. This workshop has been extended to include the aluminium geodesic dome roof and fully explains the concept of this type of tank roof and its application in the storage tankage market. It ex...

Corrosion Management

This course provides the basis for understanding systematic management of corrosion in relation to wider asset integrity management. It provides the strategies and tools required to implement an effective corrosion management system. The content uses oil and gas production to explain the concepts, but the principles can be applied to any industry sector where corrosion is a significant factor. Participants will also benefit from an appreciation of the influence of corrosion prevention and con...

Converting Oil and Gas Assets for Sustainable Development - Virtual Instructor Led Training (VILT)

As hydrocarbon assets decrease mainstream production, their infrastructure become redundant. Operators must decide whether to decommission the assets or attempt to repurpose them for handling, transport, and storage operations in the CO2, hydrogen and geothermal sectors. Workflows, checklists, screening tools, cost adjustment and ready reckoners are discussed to help those involved in the rapidly developing business environment of energy transition.

Introduction to Bowties: E-Learning Course

The objectives of this course are for you to understand the bowtie structure and the ingredients needed to create a successful and impactful bowtie. It will familiarise you with the structure and components of the bowtie with interactive scenario development. This course is accessible on any modern internet browser. Complete on-demand and at your pace. All you need is your computer or tablet and you’re set. Sign up for the demo to see how it works.

Introduction to Process Safety: E-Learning Course

Process safety focuses on preventing fires, explosions, and accidental chemical releases of hazardous substances through the application of good management and design principles. Process safety incidents can have catastrophic effects and can result in multiple injuries or fatalities, as well as substantial economic, asset, and environmental damage. We have designed this Process Safety E-Learning course to educate all that are involved with hazardous operations from operations to leadership.

HAZOP Participants: E-Learning Course

HAZOP is a critical part of the process safety ecosystem, which drives benefits in facility design and operation. If you are a Leader or Participant, training will help your facility put quality into this important safety assessment process through effective facilitation, organisation and participation. The objectives of this course are to convey the benefits of HAZOP and the role of the HAZOP review in the process safety framework. It will familiarise the participants with the structure of t...

Subsea Pipeline Design and Construction

This course will cover design and construction of subsea pipelines with respect to: design for pressure containment, design for collapse, on-bottom stability, freespans, global (lateral and upheaval buckling), corrosion, materials selection, cathodic protection and coatings

Front End Loading in Oil and Gas Projects

Front End Loading (FEL) is a methodology that takes a deliberate approach to capital project planning. Where traditional project plans seek to help an operator reach production targets and budgets, FEL methodology aligns an operator’s technical and business goals to create a more comprehensive development plan. The FEL approach increases project definition and lowers risk to positively impact total investment costs and return on investment.

Commissioning and Start-Up Activities of Coal Power Plants

This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants.

Industrial Instrumentation and Modern Control Systems

This 5 full-day course provide a comprehensive understanding of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, HART protocol, control valves, actuators, and smart technology.

Maintenance of Steam and Gas Turbines: Inspection, Diagnostic Testing, Troubleshooting, Maintenance, Overhaul and Refurbishment

This 5 full-day course provides a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all steam and gas turbines

Tripod Beta Practitioner - Preparatory Course - Silver Level

This 2-day workshop follows on from the Tripod Beta bronze level course, it gives the rules and guidelines relating to how a Tripod Beta investigation and analysis is performed. This silver level workshop provides the opportunity to apply this knowledge to one of your own incidents which helps to place the theory into the context of your own workplace.

Electrical Engineering for Non-Electrical Engineers

This 5 full-day course is for individuals who would like to gain a thorough understanding of all the principles of electrical engineering in a simple and easy to grasp format.

Performance Analysis for Diesel Engine Power Plant

This 5 full-day course will provide in-depth coverage of the selection, layout, operation, inspection, diagnostic testing, troubleshooting, maintenance, refurbishment, performance monitoring, power augmentation, and economics of all types of diesel engine power plants.

Reliability Centred Maintenance

In today’s business environment, there has never been more of a need to make Asset Management and Maintenance more cost effective and efficient.

Pumps, Compressors, Turbines & Troubleshooting

This intermediate to advanced level 3 full-day training course has been designed to provide participants with a detailed and up-to-date overview of the fluid mechanic fundamentals and operating practice of pumps, compressors and gas and steam turbines.

Introduction to Subsea Inspection, Maintenance & Repairs 

This 3 full-days course provides an introduction to Subsea Inspection, Maintenance and Repair (IMR) as it is practiced in the offshore Oil & Gas industry.

Preventive and Predictive Maintenance

This 4 full-day course provides a roadmap to help match the right type of maintenance to any equipment to provide the right blend of preventive and predictive maintenance to the right equipment.

Liquid & Gas Flowmetering & Custody Measurement

This 3 full-day course will familiarize process, instrumentation and custody transfer engineers with the procedures and practices involved in the choice of flowmetering systems.

Emissions Management: Applicable Codes, Standards, Practices & Methodologies

This 3-day technical course will provide you with a comprehensive understanding on the applicable codes, standards governing emissions testing and management within the industry, and best practices for achieving your emissions management goals.

Thermal Power Plant Performance Testing

This 5 full-day course provides a detailed description of all performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, deaerators, and feedwater heaters.

Boiler Tuning

This 5 full-day course provides detailed description of all the tuning methods for all the control systems used in pulverized coal boilers, circulating fluidized bed (CFB) boilers, cyclone boilers and stocker boilers.

LNG Terminal Marine Coordinators

This 2-day training course aims to provide a comprehensive understanding on LNG marine terminal and the coordination of vessels with terminals.

High-Pressure Multistage Pumps Design, Selection, Operation and Condition Monitoring

This advanced 5-day training course on high-pressure multistage pumps will help you comprehend their design, operation and maintenance.

Thermal Power Plant Pumps: Design, Selection, O & M and Condition Monitoring

This 5-day training course will focus on main circuit pumps for Thermal and Combined Cycle Power plants which includes design, selection, operation and maintenance and condition monitoring.

Reliability Engineering

This 3 full-day practical course will explain how to use data from operating and maintenance records and get the results you need to achieve your objectives.

Large Scale Hydrogen Production - Electrolyser Technologies and Electrolysis Interfaces – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Lead Training (VILT) course will equip participants with an overview of the technological, economical and market aspects of implementing large scale electrolysis projects. It will also provide an outlook of the developments in hydrogen production as well as the implementation of a road map and strategy for hydrogen utilization.

Clean Hydrogen: The Investment Case and Project Development Best Practices

This 3-day training course will explain the business-focused perspective on clean hydrogen investment opportunities and project development considerations.

Engineering, Procurement & Construction Contracts (EPC) - Virtual Instructor Led Training (VILT)

Our 5 half-day Virtual Instructor Led Training (VILT) course focuses on key concepts in EPC contract management and how to overcome challenges throughout every stage of the contractual process and negotiations.

Failure Mode Effects Analysis (FMEA) – Virtual Instructor Led Training (VILT)

This course is designed to provide an introduction and deliver a basic understanding of the Failure Modes and Effects Analysis (FMEA) process and where it fits into a holistic, integrated Asset Management System.

Crisis Management & Emergency Response Planning for the Oil & Gas Industry - VILT

The safety of infrastructure, workers and processes are imperative and any incident should be approached with a serious commitment.

Crisis Leadership for the Oil & Gas Industry - VILT

This VILT course will assist and guide you to comprehend the nature of crises, how you respond as a leader and how to get the utmost from your response team

Chemical Spills & Emergency Response Actions - VILT

Emergency responder staff training can greatly influence the effectiveness of your sites spills prevention strategy, use of equipment and response plan

Advanced Accident Investigation & Reporting Standards For The Oil & Gas Industry - VILT

This VILT course will discuss factors that contribute to an accident, work-related injuries, occupational illnesses, property damage, spills and fires are unplanned or undesired events.

LPG Production, Storage, Transfer & Safety

This interactive training course and workshop session is developed to provide a catalyst for transformation of the legacy systems and adapting to the upcoming trends in the near future in the LPG supply chain.

Piping Stress Engineering – Virtual Instructor Led Training (VILT)

The 5 half-day Piping Stress Engineering Virtual Instructor Led Training (VILT) course will systematically expose participants to the theory and practice of piping stress engineering, with special reference to ASME B 31.1 and ASME B 31.3 Standards.

Advanced Level – Assessing and Monitoring the Condition of Power Transformers by Oil Analysis – Virtual Instructor Led Training (VILT)

The objective of this 4-half-day Virtual Instructor Led Training (VILT) course is to equip participants with the required knowledge so that they can define and implement an effective oil analysis programme, monitor the condition of transformers and understand oil analysis reports as part of their maintenance strategy.

Assessing the Water-Steam Chemistry Cycle in Thermal Power Plants – Virtual Instructor Led Training (VILT)

This 2-half-day Virtual Instructor Led Training (VILT) course will discuss the chemical aspects of the water-steam cycle in a power plant. The VILT course will examine the different types of chemicals used in boilers, potential issues in a water-steam cycle as well as aspects of monitoring and specifications regarding target values and alarm levels. Participants will also be equipped on what to do or key action steps to take in the event of chemistry-related incidents.

Performance Analysis for Diesel Engine Power Plant - Virtual Instructor Led Training (VILT)

This 5 half-day VILT will provide in-depth coverage of the selection, layout, operation, inspection, diagnostic testing, troubleshooting, maintenance, refurbishment, performance monitoring, power augmentation, and economics of all types of diesel engine power plants.

Motors & Variable Frequency Drives (VFD) - Virtual Instructor Led Training (VILT)

This VILT will provide a comprehensive understanding of the various types of motors and variable frequency drives (VFD’s).

Fundamentals of Piping Engineering – Virtual Instructor Led Training (VILT)

The Fundamentals of Piping Engineering Virtual Instructor Led Training (VILT) course will systematically introduce participants to the basics of Piping Engineering, with piping engineering standards ASME B 31.1 and ASME B 31.3 as its backdrop.

Predictive Maintenance of Electrical Equipment - Virtual Instructor Led Training (VILT)

Predictive, or condition-based maintenance offers companies the least expensive, most efficient method of reducing equipment-related downtime and improving plant safety.

Mechanical Seals: Selection, Applications, Operation, Troubleshooting, and Maintenance - Virtual Instructor Led Training (VILT)

This VILT will provide a comprehensive understanding of the various types of mechanical seals and other methods of sealing rotating equipment including conventional packing, condensate injection sealing, and floating seal rings.

Operations, Maintenance and Testing of Power Transformer & Electric Motors - Virtual Instructor Led Training (VILT)

The objective of this training course is to provide an understanding of power transformers and electric motors, their materials, components, and how they operate.

Root Cause Analysis for Boilers and Steam Cycle Failures - Virtual Instructor Led Training (VILT)

Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems

Industrial Instrumentation and Modern Control Systems - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of modern control systems, digital control, Distributed Control Systems (DCSs), Supervisory Control And Data Acquisition (SCADA) systems, industrial instrumentation, control valves, actuators and smart technology.

Electrical Generators, Excitation Systems and Governing Systems - Virtual Instructor Led Training (VILT)

In overall, this course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVR’s), governing systems, and protective systems.

Rotating Equipment - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of the various types of rotating equipment, including centrifugal pumps, centrifugal and axial compressors, and motors.

Compressors & Pumps: Selection, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting and Maintenance – Virtual Instructor Led Training (VILT)

This course is a must for anyone who is involved in the selection, applications or maintenance of reciprocating, rotary, and centrifugal pumps or compressors because it covers how this equipment operates, the latest maintenance techniques, and provides guidelines and rules that ensures the successful operation of this equipment.

Commissioning of Electrical Equipment - Virtual Instructor Led Training (VILT)

This course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment including transformers, switchgear, induction and synchronous motors, generators and auxiliaries.

Boiler Tuning - Virtual Instructor Led Training (VILT)

This 5-day course provides detailed description of all the tuning methods for all the control systems used in pulverized coal boilers, circulating fluidized bed (CFB) boilers, cyclone boilers and stocker boilers.

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers - Virtual Instructor Led Training (VILT)

This is an advanced chemistry training course for power plant chemists and boiler engineers wishing to expand their knowledge and skills, and to become more effective in their day to day roles dealing with thermal power plant chemistry

Volt-VAR Optimization - Virtual Instructor Led Training (VILT)

Voltage/VAR management or control is essential to electrical utilities' ability to deliver power within appropriate voltage limits so that consumers' equipment operates properly, and to deliver power at an optimal power factor to minimize losses.

Predictive Maintenance: Using Machine Learning Technology in Oil & Gas Maintenance Operations - Virtual Instructor Led Training (VILT)

In the current Industrial revolution, technologies ranging from IOT, Cloud Computing, Robotics, AI & Big (Extreme) Data, and Cyber Security are demanding a huge number of new skills and capabilities.

Electrical Engineering for Non-Electrical Engineers - Virtual Instructor Led Training (VILT)

This course is for individuals who would like to gain a thorough understanding of all the principles of electrical engineering in a simple and easy to grasp format.

Practical Reliability Engineering - Virtual Instructor Led Training (VILT)

This Virtual Instructor Led Training (VILT) practical course will explain how to use data from operating and maintenance records and get the results you need to achieve your objectives.

API 510 Pressure Vessel Inspectors - Preparatory Course - Virtual Instructor Led Training (VILT)

Maintenance and Reliability Best Practices – Aligned with SMRP* Best Practices and the CMRP Certification – Preparatory Course - Virtual Instructor Led Training (VILT)

This Maintenance and Reliability Best Practices VILT will provide Maintenance and Reliability personnel with a full explanation of the Award-winning Model of Excellence for maintenance. This VILT is aligned with SMRP best practices and the CMRP exam.

Process Control and Instrumentation - Virtual Instructor Led Training (VILT)

This Virtual Instructor Led Training (VILT) course will begin with a presentation of topics to familiarise Process and Instrumentation Engineers with procedures and practices involved in the choice of sensors related to the measurement of temperature, pressure, level and flow in relation to single-phase flows.

Future Technologies and Latest Trends For Design and Construction of FPSOs - Virtual Instructor Led Training (VILT)

This course will enable participants to examine and understand the latest developments and upcoming technologies in the design and construction of FPSOs. It is a must-attend course for professionals engaged in FPSO project planning, design and construction.

Preventive and Predictive Maintenance - Virtual Instructor Led Training (VILT)

This 8 half-day Virtual Instructor Led Training (VILT) course has been derived from the Plant Performance Improvement Road Map developed by practitioners that guarantee the reliability of your operations.

Human Reliability Analysis (Safety Critical Task Analysis) - Human Factors

This 2-day course will introduce you to a qualitative methodology to undertake Human Reliability Analysis (HRA) – sometimes known as Safety Critical Task Analysis – which is an approach used to pro-actively assess safety critical tasks and other business critical tasks to identify realistic potential human errors so as to take steps to reduce the probability of their occurrence.

Risk Based Inspection for the Oil & Gas Industry – In Compliance with API 581 & API RP 581. - Virtual Instructor Led Training (VILT)

Risk Based Inspection (RBI) is a proven method used to optimise inspection activities based on risk analysis. RBI improves plant Integrity, reliability and safety while reducing unplanned outages and repair costs.

Subsea Control Systems & Umbilicals - Virtual Instructor Led Training (VILT)

This Virtual instructor Led Training (VILT) course will provide detailed learning to the various aspects of the design, analysis and operation of subsea control systems for a variety of field development options to allow effective management of subsea facilities either from offshore structures or from shore bases.

Introduction to Floating Storage & Regasification Unit (FSRU) - Virtual Instructor Led Training (VILT)

This 4 half-day Virtual Instructor Led Training (VILT) course covers Gas and LNG activities – their Supply Chain from Onshore and Offshore Gas Fields to Market, with FSRUs providing the last step by converting the LNG back to usable methane gas for local supply and use.

Subsea Pipeline Engineering – Virtual Instructor Led Training (VILT)

This Virtual Instructor Led Training (VILT) course provides a sound review of Subsea Pipeline Engineering in compliance with engineering and regulatory requirements. It is highly interactive and takes the form of lectures and case studies.

Pipe Work Design & Fabrication

This course will familiarize engineers, designers and construction personnel with the layout and design procedures and practices involved in the choice of piping systems and their associated supporting equipment. It will also address in detail, common pipeline components such as pumps, compressors and heat exchangers and will cover their mechanical performance and limitations in different piping arrangements. This course will give participants the background required to complete and successfu...

API 570: Piping Inspector Certification Preparatory Course - Virtual Instructor Led Training (VILT)

This training course is designed to train individuals who are interested in Inspection of Pipelines as per their Design Codes (ASME B31.3, B31.8) following steps listed in API 570 and other relevant API standards.

Advanced Heat Exchanger Design, Performance, Inspection, Maintenance and Operation - Virtual Instructor Led Training (VILT)

This Virtual Instructor Led Training (VILT) course will review heat transfer fundamentals as applied to tubular and plate devices. The VILT course will also address the ways in which systematic techniques of inspection and maintenance (including Fouling Control) can alleviate major problem areas.

Effective Plant Turnaround Management

The purpose of the course is to present a Model of Excellence for Turnarounds that has been developed and refined over a 30-year period by many hundreds of people working in different industries around the world.

Liquid & Gas Flowmetering & Custody Measurement – Virtual Instructor Led Training (VILT)

This Virtual Instructor Led Training (VILT) course will familiarise process, instrumentation and custody transfer engineers with the procedures and practices involved in the choice of flowmetering systems and their associated supporting equipment.

Root Cause Analysis for the Oil & Gas Industry - Virtual Instructor Led Training (VILT)

Root Cause Analysis is a systematic, evidence-driven process that helps participants find the true underlying (and often hidden) causes that result in unwanted events. Minor failures matter, and can escalate out of control.

Distributed Control System (DCS) Applications, Selection & Troubleshooting - Virtual Instructor Led Training (VILT)

This VILT will cover the practical applications of DCS and is based on a selection of subjects that either have had a strong impact on distributed systems today or explore novel ideas which may be of importance for the future.

Lubricant Analysis and Condition Monitoring - ICML, Machine For Lubricant Analyst Level II (MLAII) Certification - Virtual Instructor Led Training (VILT)

This VILT has been designed to help your company's reliability drive in the areas of lubrication, oil analysis and contamination control. It not only covers the fundamentals, but provides best practice solutions to ensure your plant achieves world class levels in lubrication management. The course content covers the body of knowledge as laid out by the International Council for Machinery Lubrication (ICML) for Machine Lubricant Analyst Level II (MLAII) certification.

EPCIC Contract Management & Essential Elements of International Contract Laws – Virtual Instructor Led Training (VILT)

This 5 half-day VILT looks at important topics such as contracting strategies, liabilities of the parties, issues of indemnity warranties and guarantees. This workshop will provide you with a forum to explore root causes behind disputes as ambiguous clauses or one sided contracts and strategies to deal with such scenarios.

Advanced Turnaround, Shutdown and Outage Management - Virtual Instructor Led Training (VILT)

Master the critical skills in managing a world-class plant Turnaround project by acquiring the following:A reprise of basic plant Turnaround – just like a refresher course,the ability to fine tune the approach to Turnarounds,a fundamental understanding of excellent Turnaround Team design,strategies for ensuring your company gets value for money from Contractors, experience in the latest cutting edge approach to planning and scheduling,understanding of the “Centre of Excellence” concept to ...

Failure Mode Effects Analysis (FMEA) For Process Plants/ Safeguarding – Virtual Instructor Led Training (VILT)

The design of this VILT is such that all learning styles are catered for in a participative, friendly environment. This is a highly interactive VILT. Theory, techniques and principles are presented via lecture, video, and practical case studies, then reinforced with individual and syndicate exercises. It is our goal to ensure the subject matter is relevant to all and participants will be encouraged to share experiences and give their own personal insights into the subject matter. Questions...

Process Safety Management & Engineering Applications - Virtual Instructor Led Training (VILT) [IChemE Approved Training Course]

This Virtual Instructor Led Training (VILT) course covers all the main elements of IChemE’s Process Safety Competency framework: culture, knowledge and competence, engineering and design, human factors, systems and procedures, and assurance.

Pumps, Compressors, Turbines & Troubleshooting - Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course has been designed to provide participants with a detailed and up-to-date overview of the fluid mechanic fundamentals and operating practice of pumps, compressors and gas and steam turbines.

Introduction to Subsea Inspection, Maintenance & Repairs - Virtual Instructor Led Training (VILT)

This Virtual Instructor Led Training (VILT) course provides an introduction to Subsea Inspection, Maintenance and Repair (IMR) as it is practiced in the offshore oil & gas industry. It will include IMR fundamentals, planning and implementation.

Introduction to Floating Production, Storage and Offloading Vessels (FPSO) - Design & Technology – Virtual Instructor Led Training (VILT)

Upon completion of this VILT course, participants should be able to understand the basics of FPSO and offshore Oil & Gas processing systems, equipment working principles as well as field requirements.

Gas Conditioning & Processing - Virtual Instructor Led Training (VILT)

The 5 half-day Virtual Instructor Led Training (VILT) course covers the design of systems for natural gas handling and treatment from the wellhead to the gas processing plant to achieve marketable products that meet desired product specifications.