Power Generation

Webinar: Proton Exchange Membrane (PEM) Electrolyser and Balance of Plant

Principles of Nuclear Power Plant Operations and Design for Small Modular Reactors (SMR) - Leveraging Clean Energy For A Sustainable Tomorrow

In an era marked by growing energy demands and heightened concerns over climate change, nuclear power continues to play a significant role in the global energy landscape. With advancements in technology, there is a renewed focus on enhancing the efficiency, safety, and flexibility of nuclear energy generation. Nuclear power holds tremendous promise as a reliable, low-carbon energy source, but also comes with complex engineering challenges. However, Small Modular Reactors (SMRs) represent an e...

Coal Power Plant Life Cycle Management and Flexible Operations in Energy Transition - Decommissioning, Preservation, Repurposing and Recommissioning

In response to emerging trends in Net Zero 2050 compliance requirements and the current COP28 Agreement, the landscape of fossil fuel power generation is undergoing a transformative shift, prompting a redefinition of operational strategies. Furthermore, balancing compliance with stringent regulations and meeting escalating energy consumption demands has become crucial. Notably, coal-fired power plants pose significant challenges on this transformative journey, being major contributors to emis...

Solar PV Systems, Modelling and Analysis - Master the Technology of Solar PV from Cells to Systems

Solar PV systems hold significant promise for generating clean and renewable energy. However, achieving optimal performance necessitates expertise in modelling, simulation, and data analysis. In this intensive 4-day course, participants will receive comprehensive training in utilizing modelling techniques and software tools to accurately analyse PV system operations, maximize energy output, and facilitate data-driven decision-making.

Large Scale Hydrogen Production - Electrolyser Technologies & Electrolysis Interfaces

Hydrogen is considered to a key component in the transition towards low to zero emission in the energy sector. Hydrogen is a versatile energy carrier and a widely used resource in the chemical industry. In order to decarbonize existing hydrogen use, clean hydrogen must be used. Hydrogen, as a chemical molecule, is perfectly suitable to store large amounts of energy, even for longer times and to transport energy between countries and even to enable the use of renewable energies across industry...

Gas Turbines, Co-Generation and Combined Cycle Power Plants

This 5 full-day course will cover all aspects of gas turbines, co-generation and combined cycle power plants.

CO2 Capture, Processing & Technologies - Virtual Instructor Led Training (VILT)

This course will cover the technology and costs of CCS capture technologies with a focus and will include discussion on the main factors affecting separation, their technology readiness and levelized costs.

Thermal Power Plant Performance Testing

This 5 full-day course provides a detailed description of all performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, deaerators, and feedwater heaters.

Boiler Tuning

This 5 full-day course provides detailed description of all the tuning methods for all the control systems used in pulverized coal boilers, circulating fluidized bed (CFB) boilers, cyclone boilers and stocker boilers.

Design of Circulating Fluidized Bed Boilers

This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail.

Maintenance of Steam and Gas Turbines: Inspection, Diagnostic Testing, Troubleshooting, Maintenance, Overhaul and Refurbishment

This 5 full-day course provides a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all steam and gas turbines

Yield Assessment, Design and Monitoring of Solar Photovoltaic Power Plants- For Bankable System Simulations Using PVsyst Software

PVSyst is a software tool used extensively in the solar photovoltaic industry to simulate and estimate the energy production of PV systems. Participants will be provided with a comprehensive understanding of how to effectively utilise PVSyst for bankable solar energy yield assessments and to assist in the design of both grid-connected and hybrid solar PV systems.

Advanced Load Forecasting & Methodology

This 5 Full-day training course will look at the latest statistical and mathematical forecasting frameworks used by industry practitioners to tackle and manage the issue of load forecasting that cuts across short and long time scales.

Introduction to Carbon Capture and Storage (CCS) for Non-Technical Professionals

Carbon Capture and Storage (CCS) is an upcoming new technology that has a vital place within global efforts to decarbonise. It has a unique set of challenges, opportunities and risks to be understood and accommodated within appropriate legal, regulatory, and social and public licence frameworks. The course has a strong international and global south emphasis with case studies on CCS projects and will touch on the role of CCS in developing country energy transition. The course satisfies a part...

Compressors & Pumps: Selection, Applications, Operation, Troubleshooting and Maintenance

This 5 full-day course will provide a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

Combustion Engineering for Coal Fired Power Plants

This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans.

Introduction to Power Systems

This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control.

Root Cause Analysis for Boilers and Steam Cycle Failures

This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology.

Heat Rate Optimization of Coal Power Plants

This 5 full-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants.

Steam Turbine Technology

This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Heat Rate Optimization of Coal Power Plants

This 5 full-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants.

Apollo Root Cause Analysis™ Methodology- Solve Complex Problems and Prevent Recurrences of Failures

The Apollo Root Cause Analysis™ methodology course is a comprehensive 2-day training designed to equip participants with the essential skills and knowledge for effective problem analysis and investigation. This course is particularly beneficial for professionals who regularly encounter incidents or failures that could recur, including those who lead investigations and produce reports.

Safety and Performance Aspects of Batteries for Energy Storage Systems for Utilities (Large Scale) - Empowering Sustainable Energy with Reliable and Safe Battery Solutions

Batteries are considered to a key component in the transition towards low to zero emission in the energy sector, which is more and more determined by renewable sources. Batteries can store renewable generated electrical energy in large quantities to compensate their fluctuations in generation.

Large Scale Hydrogen Production - Electrolyser Technologies & Electrolysis Interfaces

Hydrogen is considered to a key component in the transition towards low to zero emission in the energy sector. Hydrogen is a versatile energy carrier and a widely used resource in the chemical industry. In order to decarbonize existing hydrogen use, clean hydrogen must be used. Hydrogen, as a chemical molecule, is perfectly suitable to store large amounts of energy, even for longer times and to transport energy between countries and even to enable the use of renewable energies across industry...

Maintenance of Rotating Equipment: Diagnostic Testing, Troubleshooting, Maintenance, and Refurbishment

This 5 full-day course will provide a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all rotating equipment including centrifugal pumps, centrifugal and axial compressors, steam and gas turbines.

Transforming Waste into Energy - Best Practices for Sustainable Power Generation

Waste generation increases daily as populations grow and economies develop. Traditionally, waste disposal has relied on landfilling, leading to greenhouse emissions and other pollutions. Meanwhile, our energy needs are rising. An innovative solution addressing both issues can be implemented by transforming waste into electricity, fuels, and heat through advantageous Power Purchase Agreements. Converting waste to energy is the most sustainable and renewable approach to reduce fossil fuel relia...

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

Safety and Performance Aspects of Batteries for Energy Storage Systems for Utilities (Large Scale) - Empowering Sustainable Energy with Reliable and Safe Battery Solutions

Batteries are considered to a key component in the transition towards low to zero emission in the energy sector, which is more and more determined by renewable sources. Batteries can store renewable generated electrical energy in large quantities to compensate their fluctuations in generation.

EPCC and O&M Agreements in Solar PV Projects Development- Bridging the Commercial and Technical Terms in Sustainable Energy Projects

The global renewable energy landscape is experiencing unprecedented growth, with solar photovoltaic (PV) projects leading the charge. The International Renewable Energy Agency has reported a significant surge in solar PV capacity, contributing substantially to the global energy. This solar growth presents immense opportunities for companies in the power utilities, renewable energy and EPCC sector. Industry projections suggest that in the coming years, significant EPCC contracts are expected ...

Steam Turbine Technology

This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Thermal Power Plant Performance Testing

This 5 full-day course provides a detailed description of all performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, deaerators, and feedwater heaters.

Steam Turbine Technology

This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Carbon Capture, Utilization & Storage (CCUS) – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide.

HV & MV Power System Design, Protection & Coordination - Virtual Instructor-Led Training (VILT)

This 5 half-days training course addresses all aspects of industrial & utility power systems, including system planning, equipment selection, specification and application, system grounding, protection and conformity with electrical code requirements etc.

Grounding System Design, Testing and Power Quality Application for Oil and Gas and Utilities Application

Grounding (earthing) and bonding systems ensure that electrical systems are safe from electric shock and fires by limiting the voltage imposed by lightning, line surges, or unintentional contact with high voltage lines as well as an earth fault. An integrated approach of theory and practice will ensure you have a firm foundation of knowledge when you begin your next design or construction project, or when you encounter problems in your electrical system which must be corrected for safety, ope...

Floating Solar Farms (FPVS) - Technical Architecture, Operations and Economics – Virtual Instructor Led Training (VILT)

The VILT course discusses mainly projects from ASEAN countries and other jurisdictions including hybrid projects from Canada and the United States with installations on hydroelectric reservoirs. The flexibility of the invertor-based resources facilitates a higher penetration of floating or land PVs, Battery Electricity Storage Systems (BESS) and demand response.

Commissioning of Combined Cycle Power Plants

This 5 Day course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants

Commissioning and Start-Up Activities of Coal Power Plants

This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants.

Ultra Supercritical Steam Power Plants: Design, Selection, Applications, Operation, Maintenance, Performance Monitoring, Power Augmentation, Emission Control Methods, Carbon Capture Technology, Economics, Profit Optimization, Revenue and Life Cycle Cost Analysis

This 3 full-day course will cover all aspects of ultra supercritical steam power plants and advanced ultra supercritical power plants.

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers

This 5 full-day course will provide ample opportunity for robust technical discussion and expand on advanced concepts in thermal power plant cycle chemistry. It focuses only on the steam/water aspects of the thermal power cycle.

Electrical Engineering for Non-Electrical Engineers

This 5 full-day course is for individuals who would like to gain a thorough understanding of all the principles of electrical engineering in a simple and easy to grasp format.

Performance Analysis for Diesel Engine Power Plant

This 5 full-day course will provide in-depth coverage of the selection, layout, operation, inspection, diagnostic testing, troubleshooting, maintenance, refurbishment, performance monitoring, power augmentation, and economics of all types of diesel engine power plants.

Combined Cycle Gas Turbine Performance

This 5 full-day course will focus on all aspects of combined cycle power plants.

Steam Turbine Design – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course will cover all aspects of steam turbine design including blade design and material, operating principles, sizing and selection procedures, inspection, diagnostics, maintenance and overhaul of steam turbines, steam turbine start-up and shutdown procedures, surveillance and health monitoring of steam turbines, governing systems as well as all the components, instrumentation and control systems of steam turbines, and address root caus...

High-Pressure Multistage Pumps Design, Selection, Operation and Condition Monitoring

This advanced 5-day training course on high-pressure multistage pumps will help you comprehend their design, operation and maintenance.

Thermal Power Plant Pumps: Design, Selection, O & M and Condition Monitoring

This 5-day training course will focus on main circuit pumps for Thermal and Combined Cycle Power plants which includes design, selection, operation and maintenance and condition monitoring.

Advanced Load Forecasting & Methodology – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course will look at the latest statistical and mathematical forecasting frameworks used by industry practitioners to tackle and manage the issue of load forecasting that cuts across short and long time scales.

Large Scale Solar & Energy Storage - System Operations – Virtual Instructor Led Training (VILT)

This 5 half-day Virtual Instructor Led Training (VILT) course will assist energy professionals in the planning and operation of a power system from renewable energy sources. The VILT course will discuss key operating requirements for an integrated, reliable and stable power system.

Green Hydrogen Production from Offshore Wind – Virtual Instructor Led Training (VILT)

This 2 half-day Virtual Instructor Lead Training (VILT) course will examine the technological options for on-site production of hydrogen by electrolysis (onshore or offshore directly at the platform) as well as the transport of hydrogen (pipeline or ship). This VILT course will also explore the economic considerations and the outlook on future market opportunities.

Hydrogen for Firm Power Generation – Virtual Instructor Led Training (VILT)

This 3 half-day Virtual Instructor Led Training (VILT) course will provide participants with a comprehensive and up-to-date introduction to the prospects for hydrogen in future power mixes.

Introduction to Offshore Wind: Technology, Projects & Economics - Virtual Instructor Led Training (VILT)

This VILT course is intended to help participants understand the offshore wind technologies, trends, processes and financial return and risk considerations involved in project development.

Assessing the Water-Steam Chemistry Cycle in Thermal Power Plants – Virtual Instructor Led Training (VILT)

This 2-half-day Virtual Instructor Led Training (VILT) course will discuss the chemical aspects of the water-steam cycle in a power plant. The VILT course will examine the different types of chemicals used in boilers, potential issues in a water-steam cycle as well as aspects of monitoring and specifications regarding target values and alarm levels. Participants will also be equipped on what to do or key action steps to take in the event of chemistry-related incidents.

Assessing the Safety of Hydrogen Installations – Virtual Instructor Led Training (VILT)

The goal of this course is to provide insights to engineers and project managers working on hydrogen processes who are concerned with the specific risks of hydrogen installations.

Performance Analysis for Diesel Engine Power Plant - Virtual Instructor Led Training (VILT)

This 5 half-day VILT will provide in-depth coverage of the selection, layout, operation, inspection, diagnostic testing, troubleshooting, maintenance, refurbishment, performance monitoring, power augmentation, and economics of all types of diesel engine power plants.

Motors & Variable Frequency Drives (VFD) - Virtual Instructor Led Training (VILT)

This VILT will provide a comprehensive understanding of the various types of motors and variable frequency drives (VFD’s).

Steam Turbine Technology - Virtual Instructor Led Training (VILT)

This 5 half-day online course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines.

Predictive Maintenance of Electrical Equipment - Virtual Instructor Led Training (VILT)

Predictive, or condition-based maintenance offers companies the least expensive, most efficient method of reducing equipment-related downtime and improving plant safety.

Mechanical Seals: Selection, Applications, Operation, Troubleshooting, and Maintenance - Virtual Instructor Led Training (VILT)

This VILT will provide a comprehensive understanding of the various types of mechanical seals and other methods of sealing rotating equipment including conventional packing, condensate injection sealing, and floating seal rings.

Mechanical Engineering for Non-Mechanical Engineers - Virtual Instructor Led Training (VILT)

This VILT is for individuals who would like to gain a thorough understanding of all the principles of mechanical engineering in a simple and easy to grasp format.

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment - Virtual Instructor Led Training (VILT)

This VILT provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment including: transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries.. 

Gas Turbine Bearings - Virtual Instructor Led Training (VILT)

Best Operation Practices for a Hydro Electric Power Plant - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of all the best operation practices for a hydro-electric power plant.

Introduction to Energy Transition – Virtual Instructor Led Training (VILT)

Man induced climate change is now an accepted phenomenon that has become one of the most pressing crises humanity faces today. As the most abundant greenhouse gas in our atmosphere, CO2 levels have risen from a pre industrial baseline of 280 ppm to ~410 ppm leading to a rise in average global temperatures at a rate unprecedented in geological past.

Heat Rate Optimization of Coal Power Plants - Virtual Instructor Led Training (VILT)

This 5 half-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants.

Commissioning of Combined Cycle Power Plants - Virtual Instructor Led Training (VILT)

This course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants.

Commissioning and Start-up Activities of Coal Power Plants - Virtual Instructor Led Training (VILT)

This course provides a comprehensive understanding of all the commissioning and start-up activities of coal power plants.

Combined Cycle Gas Turbine Performance - Virtual Instructor Led Training (VILT)

This course will cover all aspects of combined cycle power plants.

Introduction to Power Systems - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control.

Electrical Generators, Excitation Systems and Governing Systems - Virtual Instructor Led Training (VILT)

In overall, this course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVR’s), governing systems, and protective systems.

Coal Mining Fundamentals - Virtual Instructor Led Training (VILT)

The coal industry remains an integral part of the international energy mix and is vital to the developing economies of SE Asia.

Rotating Equipment - Virtual Instructor Led Training (VILT)

This course will provide a comprehensive understanding of the various types of rotating equipment, including centrifugal pumps, centrifugal and axial compressors, and motors.

Compressors & Pumps: Selection, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting and Maintenance – Virtual Instructor Led Training (VILT)

This course is a must for anyone who is involved in the selection, applications or maintenance of reciprocating, rotary, and centrifugal pumps or compressors because it covers how this equipment operates, the latest maintenance techniques, and provides guidelines and rules that ensures the successful operation of this equipment.

Best Practice Risk Management Offshore Wind Projects - Virtual Instructor Led Training (VILT)

Learn how the leading energy companies in the world are managing the risks of the business case, construction and operation of new to build offshore wind parks.

Mini Hydro Power Plant - Virtual Instructor Led Training (VILT)

This 5-half day Virtual Instructor Led Training (VILT) course will provide a comprehensive understanding of all the best operation practices for a mini (smaller than 25 MW) hydro-electric power plant.

Commissioning of Electrical Equipment - Virtual Instructor Led Training (VILT)

This course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment including transformers, switchgear, induction and synchronous motors, generators and auxiliaries.

Coal: Pit to Port to Power - Virtual Instructor Led Training (VILT)

The course is generally applicable to anyone who would like to understand more about coal.

Gas Turbines and Co-Generation Plants - Virtual Instructor Led Training (VILT)

This course will cover all aspects of gas turbines and co-generation plants.

Ultra Supercritical Steam Power Plants - Virtual Instructor Led Training (VILT)

This course will cover all aspects of ultra supercritical steam power plants and advanced ultra supercritical power plants.

Boiler Tuning - Virtual Instructor Led Training (VILT)

This 5-day course provides detailed description of all the tuning methods for all the control systems used in pulverized coal boilers, circulating fluidized bed (CFB) boilers, cyclone boilers and stocker boilers.

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers - Virtual Instructor Led Training (VILT)

This is an advanced chemistry training course for power plant chemists and boiler engineers wishing to expand their knowledge and skills, and to become more effective in their day to day roles dealing with thermal power plant chemistry

Computer Simulation of Gas Turbines, Co-Generation and Combined Cycle Power Plants - Virtual Instructor Led Training (VILT)

This course provides in depth computer simulation of gas turbines under steady-state and transient conditions.

Introduction to Power Generation - Virtual Instructor Led Training (VILT)

This course will cover all aspects of steam power plants, gas turbines, co-generation, combined cycle plants, wind and solar power generating plants.

Electrical Engineering for Non-Electrical Engineers - Virtual Instructor Led Training (VILT)

This course is for individuals who would like to gain a thorough understanding of all the principles of electrical engineering in a simple and easy to grasp format.

Process Safety Management & Engineering Applications - Virtual Instructor Led Training (VILT) [IChemE Approved Training Course]

This Virtual Instructor Led Training (VILT) course covers all the main elements of IChemE’s Process Safety Competency framework: culture, knowledge and competence, engineering and design, human factors, systems and procedures, and assurance.