Power Transmission & Distribution Training Courses > Transmission Lines: Design, Analysis and Applications
Code Date Format Currency Team of 10
Per Person*
Team of 7
Per Person*
Early Bird Fee
Per Person
Normal Fee
Per Person
PWR1305 21 - 25 Apr 2025 Kuala Lumpur, Malaysia SGD 4,471 4,679 4,999 5,199
PWR1305 21 - 25 Apr 2025 Kuala Lumpur, Malaysia USD 3,439 3,599 3,799 3,999

*Fee per person in a team of 7 or 10 participating from the same organisation, registering 6 weeks before the course date
Request for a quote if you have different team sizes, content customisation, alternative dates or course timing requirements
Request for in-person classroom training or online (VILT) training format

Learn in teams and save more! Enjoy group discounts of up to 50% off normal fees for team based learning. Contact us on [email protected] to learn more today!

Code

PWR1305

Date

21 - 25 Apr 2025

Format

Kuala Lumpur, Malaysia

Currency

SGD

Team of 10
Per Person*

4,471

Team of 7
Per Person*

4,679

Early Bird Fee
Per Person

4,999

Normal Fee
Per Person

5,199

Code

PWR1305

Date

21 - 25 Apr 2025

Format

Kuala Lumpur, Malaysia

Currency

USD

Team of 10
Per Person*

3,439

Team of 7
Per Person*

3,599

Early Bird Fee
Per Person

3,799

Normal Fee
Per Person

3,999

*Fee per person in a team of 7 or 10 participating from the same organisation, registering 6 weeks before the course date
Request for a quote if you have different team sizes, content customisation, alternative dates or course timing requirements
Request for in-person classroom training or online (VILT) training format

About this Training Course

Transmission lines and sub-stations are essential components in the electrical power systems. Proper design and maintenance are crucial for transmission lines to maintain a continuous operation. The objective of this 5-day training course is to deal appropriately with control systems, design characteristics and electric & magnetic fields. Participants will gain a better understanding on the corona and gap discharge phenomena, constructional features, and optimization of the transmission lines.

By participating in this course, you will be able to:

  • Understand transmission line design and its application
  • Examine different types of conductors and electrical characteristics
  • Explore basic and general transmission line parameters
  • Prevent overvoltage through insulation design
  • Determine surge impedance and corona effects
  • Calculate and measure electric and magnetic fields
  • Comprehend the impact of audible noise and electromagnetic interference
  • Identify interference within the transmission line systems

The course will greatly benefit the following groups but not limited to:

  • Electrical Engineers
  • Civil Engineers
  • Transmission & Distribution Engineers
  • Substation Operators
  • Safety Engineers
  • Reliability Engineers
  • Facility & Plant Engineers
  • Technical Engineers
  • Design Engineers
  • Plant Supervisors
  • Electrical Contractors
  • Intermediate

The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.

Course Duration: 5 days in total (35 hours).

Training Schedule

0830 – Registration 0900 – Start of training 1030 – Morning Break 1045 – Training recommences 1230 – Lunch Break 1330 – Training recommences 1515 – Evening break 1530 – Training recommences 1700 – End of Training

The maximum number of participants allowed for this training course is 25.

This course is also available through our Virtual Instructor Led Training (VILT) format.

Your expert course leader is a professional engineer with extensive experience in power system studies, substation design field-testing, and EHS programs settings for Mining and Electrical Utilities sectors. He was formally the Engineering Manager at GE Canada in Ontario. He received his M.Sc. in electrical engineering from the University of New Brunswick and his MBA from Laurier School of Business in Waterloo. He has managed and executed more than 150 engineering projects on substation design EMF audits and power system studies and analyses, EMF audits and grounding audits, for major electrical utilities, mines, oil and gas, data centers, industrial and commercial facilities in Canada and the U.S. He is a certified professional engineer in the provinces of Ontario and Alberta.

He has various IEEE publications, has served as a technical reviewer for many IEEE journals in power systems and control systems, and is the chair of the Industry Application Chapter (IAS) for IEEE Toronto Section. He remains a very active member for the IEEE substation committee of IEEE Std. 81 ground testing (WGE6) and IEEE Std. 80 ground design (WGD7). A certified electrical safety trainer by GE Corporate and a Canadian Standard Association (CSA) committee member at the mining advisory panel for electrical safety, he also taught many technical courses all over Canada to industrial customers, electrical consultants as well as to electrical utilities customers.

Highlighted Projects:

  • Various Power System Studies for 345/230 kV Stations – Nova Scotia Power (EMERA)
  • RF audits for Telecom tower and antennas – Cogeco/Rogers Mobile
  • Power System analysis – Powell Canada
  • Structural/Geotechnical Design and upgrades – Oakville Hydro
  • Underground Cables testing and sizing – Plan Group
  • Relay programming and design optimization – Cenovus Canada
  • Different Arc Flash Analysis and BESS Design – SNC Lavalin
  • Environmental site assessment (ESA) Phase I/II for multiple stations – Ontario
  • Electromagnetic compatibility (EMC) assessment for Toronto LRT expansion – MOSAIC
  • Battery energy storage system (BESS) installation at City of London – Siemens Canada
  • EMF audits for 500 kV Transmission Lines – Hydro One
  • EMF audits for 500 kV Transmission Lines – Hydro Quebec
  • AC interference for 138 kV line modeling and mitigations – HBMS Mine
Unlock the potential of your workforce with customized in-house training programs designed specifically for the energy sector. Our tailored, in-house courses not only enhance employee skills and engagement but also offer significant cost savings by eliminating travel expenses. Invest in your team's success and achieve specific outcomes aligned with your organization's goals through our expert training solutions. Request for further information regarding our on-site or in-house training opportunities.

In our ongoing commitment to sustainability and environmental responsibility, we will no longer providing hard copy training materials. Instead, all training content and resources will be delivered in digital format. Inspired by the oil and energy industry’s best practices, we are leveraging on digital technologies to reduce waste, lower our carbon emissions, ensuring our training content is always up-to-date and accessible. Click here to learn more.

To further optimise your learning experience from our courses, we also offer individualized “One to One” coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.
Request for further information post training support and fees applicable

Learn what past participants have said about EnergyEdge training courses

Great learning experience with the trainer.

Senior Engineer, Sarawak Energy Berhad

This is a good course that enables me to grasp the knowledge in transmission and generation.

Electrical Engineer, Sarawak Energy Berhad

The training was insightful and well-structured, providing a comprehensive understanding of the subject matter.

Energy Regulation Officer I, Energy Regulatory Commission

Awesome trainer, I must say. Packed with lots of knowledge. A must go for professionals looking to gain more knowledge in Transmission system.

Senior Engineer, Sarawak Energy Berhad

The trainer possesses an in-depth knowledge of the subject matter, making complex concepts accessible for learners. What sets him apart is their ability to tailor the training to individual needs, ensuring that every participant grasps the material effectively. His passion for teaching is evident in the way he seamlessly blend theoretical knowledge with practical applications, making the learning experience both enriching and enjoyable.

Senior Engineer, Sarawak Energy Berhad

EnergyEdge always provide a good and useful training and great trainers. Thank you. You are the best!

Senior Engineer, Sarawak Energy Berhad

The training was insightful and well-structured, providing a comprehensive understanding of the subject matter. The engaging format and interactive elements enhanced the learning experience.

Energy Regulation Officer I, Energy Regulatory Commission

Excellent. This course can be related to actual job at site & theoretical knowledge.

Electrical Engineer, Sabah Electricity Sdn Bhd