Carbon Capture > Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring
Code Date Format Currency Team of 10
Per Person*
Team of 7
Per Person*
Early Bird Fee
Per Person
Normal Fee
Per Person
PE1898 23 - 25 Sep 2024 Kuala Lumpur, Malaysia SGD 3,611 3,779 3,999 4,199
PE1898 23 - 25 Sep 2024 Kuala Lumpur, Malaysia USD 2,837 2,969 3,099 3,299

*Fee per person in a team of 7 or 10 participating from the same organisation, registering 6 weeks before the course date
Request for a quote if you have different team sizes, content customisation, alternative dates or course timing requirements
Request for in-person classroom training or online (VILT) training format

Learn in teams and save more! Enjoy group discounts of up to 50% off normal fees for team based learning. Contact us on [email protected] to learn more today!

Code

PE1898

Date

23 - 25 Sep 2024

Format

Kuala Lumpur, Malaysia

Currency

SGD

Team of 10
Per Person*

3,611

Team of 7
Per Person*

3,779

Early Bird Fee
Per Person

3,999

Normal Fee
Per Person

4,199

Code

PE1898

Date

23 - 25 Sep 2024

Format

Kuala Lumpur, Malaysia

Currency

USD

Team of 10
Per Person*

2,837

Team of 7
Per Person*

2,969

Early Bird Fee
Per Person

3,099

Normal Fee
Per Person

3,299

*Fee per person in a team of 7 or 10 participating from the same organisation, registering 6 weeks before the course date
Request for a quote if you have different team sizes, content customisation, alternative dates or course timing requirements
Request for in-person classroom training or online (VILT) training format

About this training course

This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS). CO2 geological storage is a proven technology to reduce greenhouse gas emissions from sources such as coal power plants, cement kilns and steel mills. Wells are widely considered the most critical containment element, especially older wells that are not used to inject CO2 or monitor the plume evolution in the storage reservoir. The main reason for this perceived risk is the high corrosion rate of carbon steel when exposed to wet CO2, and the tendency of Portland cement to react with the gas.

The training course advanced contents build on 15 years’ experience in carbon storage, both in the development and deployment of technologies. First-hand, in-depth knowledge of the subject will allow us to debunk myths and focus on the real challenges of wells encountering CO2.

After the completion of this training course, participants will be able to:

  • Explain the CCUS market drivers
  • Examine the behavior of CO2, on surface and in the reservoir
  • Diagnose cement defects and design repairs
  • Understand the limits of Portland cement
  • Assess the benefits of different technologies and materials
  • Realize why geology is a dominant factor in cement performance
  • Critically choose the most appropriate monitoring techniques
  • Classify aging processes of cement, steel, and rock when exposed to CO2
  • Assess the risk of existing wells if they encounter the CO2 plume
  • Examine recent advances in real-time approaches to the production monitoring and lift management

This training course is suitable and will greatly benefit:

  • All surface technical personnel such as process engineers & technologists
  • Facility engineers, production engineers & technologists
  • Drilling engineers and Well engineers
  • Design engineers and Integrity engineers
  • P&A engineers and Cementing engineers
  • Geologists
  • Senior management executives will benefit from this training as covers an overview of the technical and commercial details of CO2 capture technologies and risks involved.
  • Intermediate

The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.

Course Duration: 3 days in total (21 hours).

Training Schedule

0830 – Registration 0900 – Start of training 1030 – Morning Break 1045 – Training recommences 1230 – Lunch Break 1330 – Training recommences 1515 – Evening break 1530 – Training recommences 1700 – End of Training

The maximum number of participants allowed for this training course is 20.

This course is also available through our Virtual Instructor Led Training (VILT) format.

Your expert course leader is an engineer with a passion for well integrity and possesses 28 years of international experience in field operations, technology development and management in the oil & gas and carbon storage sectors. Since 2018 he is program chair of the Well Integrity Technical Section of the Society of Petroleum Engineers (SPE). He is also author or co-author of 31 technical papers, a book chapter on CO2 geological storage and 7 patent applications. He delivers training on well integrity, plug and abandonment, asset integrity, risk management and QHSE across the Eastern Hemisphere, and carries out active research on harnessing geological barriers, modeling leaks through cement, and quantifying methane emissions from oil & gas wells. He has extensive expertise in: Well integrity, cementing, corrosion, upstream oil & gas (drilling, completion), carbon capture and storage, mathematical modeling, risk management, reliability, HSSE (health/safety/security/environment), asset integrity, management systems, sustainable development, project management, portfolio management, training, and technology development and innovation. He has personally worked on CCS projects in Europe (France, Germany, Netherlands, Norway), Algeria, Japan and USA.

Partial list of companies that have benefited from the trainer’s expertise:

  • Vermilion Energy
  • Geostock
  • Aker BP
  • Shell
  • Statoil
  • ENI
  • TNO
  • Geogreen
  • Wintershall
  • Archer
  • INA and many more

Recent CCS consulting track record:

  • Schlumberger
  • Total
  • Oxand
  • TNO
  • THREE60 Energy and others

To further optimise your learning experience from our courses, we also offer individualized “One to One” coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.
Request for further information post training support and fees applicable

Learn what past participants have said about EnergyEdge training courses

I would like to recommend this training to new engineers

General Engineer, Bureau of Safety and Environmental Enforcement, USA

This course provides several good topics concerning the CCUS. It is very informative to the learner.

Engineer, Bureau of Safety and Environmental Enforcement, USA

The instructor was extremely knowledgeable on this topic, and very enthusiastic and engaging!

Chief Inspection Policy Branch, Bureau of Safety and Environmental Enforcement, USA